These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

Micro Centrifuge tubes are available in three sizes; 0.5ml, 1.5ml and 2.0ml. CELLTREAT Micro Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro…

SuperClear® Screw Cap Microcentrifuge Tubes include caps with molded-in elastomeric seal or ethylene propylene O-Rings and are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a…

0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

Hinged flip cap for single-handed opening Chemical-resistant Leakproof Sterile EZ Flip™ Conical Centrifuge Tubes feature a patented closure system that allows one-handed opening and closing without compromising aseptic conditions. Manufactured to exacting tolerance,…

SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and…

Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free

High temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation Graduated tubes have markings every 100µL for…

Made of polypropylene This series of tubes is also available either plain or with printed graduations and white marking area for sample identification. O-ring seal screw caps are unattached but incorporate a flat top which provides a writing surface. These flat surfaced caps can be used with…

Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…

SuperClear® tubes offer you a standard of performance not available from other brands of centrifuge tubes. These tubes are made from a unique medical grade resin that is far more durable than commodity grade resins used in most other brands of tubes. This high quality resin makes it possible…

Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

Graduations on clear tubes are printed in bold easy-to-read black ink and are accurate to ± 2% 50mL clear tubes include a black printed 50mL graduation line and 1, 2 and 3mL graduations molded into the conical bottom Large white marking area provides excellent contrast for…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in…

Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from coming in contact with the…

These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…