Chromatography Tubes, Tubes
-
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
Tubes with Caps
MTC BioThese disposable sterile tubes are made of high quality polypropylene (PP) plastic that will withstand temperatures from -190° to +120°C. They are also available in crystal clear polystyrene (PS) with a range of 0° to 70°C. Caps are made of polyethylen
-
ESI Needle (Tube)
PerkinElmerThe innovative separation probes and holders facilitate chromatography directly at the ionization source. This minimizes dead volume effects in the system for superior signal-to-noise ratios, enhanced sensitivity and narrower peaks. Compatible with LC/MS systems using Flexar SQ300 or AxION 2 TOF MS.
-
GBC Standard Graphite Tube, Pyrolytically Coated
PerkinElmerThe GBC Standard Graphite Tube is pyrolytically coated, D7/3.7x24.2 mm and comes in a quantity of 10. This tube is fit to perform on a GBC atomic absorption (AA) instrument and is the equivelant of GBC part 99-0059-00.
-
PTFE connecting tube for connection to digestion vessels with 8 and 16 position Gas Containment Manifold.
-
Capillary Sample Tubes
PerkinElmerHigh Capacity Hydrocarbon Trap contains: 750 cc of preconditioned activated charcoal, Stainless steel body, ¼” brass compression fittngs with ferrules for installation, Maximum pressure 200 psi, Recommended ow rate up to 2 L per minute, Will remove hydrocarbon impurities (50 ppm or less) from inert…
-
The spherically shaped platform accommodates up to 50 µL of sample. Graphite tubes with integrated platforms: Provide STPF conditions for volatile and nonvolatile refractory elements due to the significantly higher heating rates of tube and platform, which can be used for all elements. Offer an…
-
The spherically shaped platform accommodates up to 50 µL of sample. Graphite tubes with integrated platforms: Provide STPF conditions for volatile and nonvolatile refractory elements due to the significantly higher heating rates of tube and platform, which can be used for all elements. Offer an…
-
Every genuine PerkinElmer consumable and reagent is of high quality and designed specifically for your PerkinElmer instrument. Includes combustion and reduction tubes, reagents and capsules to perform 500 analyses in the CHNS mode. Total amount of runs may vary depending on selected combustion conditions.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
-
BioReactors Fixed Height Sample Tubes
ChemglassFixed height sampling tubes for bioreactors. Tubing is 1/4 inch OD.Like-for-like replacement parts for Applikon® Biotechnology and Broadley-James® brands of bioreactors.Applikon® is a registered trademark of Applikon Biotechnology, Inc. Broadley-James® and Broadley-James…
-
Quartz Tube with Au/Pt Gauze for Amalgamation System
-
The partition graphite tube for Agilent is pyrolytically coated, D6. 9/3. 9x24. 9 mm and comes in a quantity of 10. It has an extended life and is fit to perform on atomic absorption (AA) instruments for Agilent. The extended life partition graphite tube is equivalent to Agilent part 63-100012-EL.
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Standard HGA Graphite Tubes with Lvov Groove
PerkinElmerThese HGA graphite tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. They are slotted to accept L'vov platforms, PerkinElmer part number B3001256. PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and…
-
Polystyrene Transport Tube
United Scientific SuppliesSterilized polystyrene transport tubes are graduated from 1 to 8cc with graduation intervals of 1cc. Include raised graduations on the outer surface, a flat bottom for self-standing, and a leak-proof polyethylene screw cap. Dimensions: 20mm diameter x 112mm height with cap. Case/500
-
Tubes, Screw Thread, SVL®
ChemglassScrew thread tube for replacement of apparatus using the SVL® series of glass threads. For use with a CG-188 solid cap with PTFE liner or a CG-189 open top cap and sealing ring for use as a tubing connector. Threads are tooled on one end of a 6in length of tubing.
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100012-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
Standard HGA Graphite Walled Tubes
PerkinElmerThese HGA graphite walled tubes are pyrocoated to provide improved sensitivity and tube-to-tube reproducibility. The walled tube should be used in place of L'vov platform tubes when analyzing refractory elements such as Vanadium. NOTE: The tubes do not have an integrated platform and are not…
-
The graphite tube, the heart of the graphite furnace, plays a vital role in the overall stability of an analysis. In order to assure stable analytical conditions from one atomization cycle to the next, and from graphite tube to graphite tube, all graphite parts - contacts, tubes and platforms -…
-