Thermoregulators

Compare Tool

Select up to 3 products

HomeAll Products

Thermoregulators

1 - 25 of 25
Sort
View
Show
  • Digital Temperature Controllers

    Chemglass

    PID controller for use with our CG-1100 oil baths. Controller has 1500 Watts of power and will control temperatures to ± 1.0°C. Supplied complete with CG-15001-25 Type "J" Thermocouple.

  • TD101X Automatic On/Off Thermostat Control with Conduit Fitting

    BriskHeat

    Product Highlights Ideal thermostat for individual circuits requiring a weatherproof device Typical uses: Temperature control on heat tracing and process fluid system applications External alarm or an over temperature limit switch in conjunction with another control system …

  • Traceable® Temperature Controller

    Thomas®

    °C/°F selectable NIST Traceable Easy to operate Remembers On/Off settings Controllers turn any piece of equipment on or off when the temperature rises above a “high” set point or falls below a “low” set point. Automatic switchings allow it to control heating elements,…

  • Temperature Controller

    Stuart (Cole-Parmer)

    Accurate liquid temperature control Built in retort fitting and probe holder Detachable temperature probe Bright, easy to read LED display Compact and light weight Comprehensive range of accessories The Stuart SCT1 temperature controller is the ideal instrument for the accurate temperature…

  • Digital Temperature Controller

    Electrothermal (Cole-Parmer)

    Ensures accurate temperature control 3-digit LED 1°C resolution Temperature range: -10 to 800°C Resistance thermometer probe senses the temperature of a medium that is being heated. Required temperatures are programmed into the unit using the directional…

  • Temperature Controller, Time Proportional, 2 Outlet

    Ace Glass

    Compact, lightweight time proportional digital controller²for use with type J temperature probes with a male SMP/OST²plug. Controller has two 120vac front outlets (1800 watts²total from either outlet or in combination) ideal for two²circuit heating mantles and one rear alarm outlet.…

  • Temperature Sensors, Microprobe, T, J or K Thermocouple

    Ace Glass

    Flexible, immersion or implantable microprobes, Type J, K, and T (for low temperatures). Three foot long wire lead, isolated electrically, is PTFE covered and can be assembled into septum, etc. using needle supplied. Maximum operating temperature of microprobe is 150 degree C .

  • HighTech Series Heating Circulators

    Julabo

    The HighTech Series of JULABO Heating Circulators provide a range of operating temperatures from -+20 °C to +300 °C. These temperature control units are suitable for temperature control of internal and external applications. Models include a 4-speed centrifugal pressure/suction pump…

  • Temperature Controller

    Ace Glass

    Temperature controller ideal for two circuit mantles or general use. Features two front mounted outlets, 16 segment ramp and soak function, fuzzy logic auto tune PID, type 'J' thermocouple, dual 4 digit LED display, universal TC jack for "mini" or "standard" plugs. Unit is downsized, compact and…

  • Temperature Controller, J-Kem®, Model HCC

    Chemglass

    The J-KEM® Scientific HCC controller is designed to power large scale equipment such as 50L to 100L heating mantles. Designed with the same safety features as the Model 270, the HCC incorporates a 100 hour digital timer to turn heating on or off. PLEASE NOTE: THIS CONTROLLER REQUIRES ONE…

  • High Temperature Limit Controllers

    BriskHeat

    Protect your process or equipment from excessive heat with a High Temperature Limit Controller. Provides high-limit cutoff protection for a wide range of applications Benchtop plug and play design for indoor use 5 ft Power cord and 10 ft temperature sensor included Includes…

  • SDC Benchtop Temperature Controllers

    BriskHeat

    Product Highlights Affordable and compact Compatible with a wide range of heaters andapplications Easy-to-use programmable digital controller, self contained, plug and play design Specifications Small Unit Size: 5.5 in L x 4.25 in W x 1.75 in H (140…

  • Temperature Controller, Economy Model

    Ace Glass

    Economy Model, compact, digital temperature controller. 16 segment ramp and soak, fuzzy logic, auto tune PID controller. One T, K, or J type sensor input. One 120V output. Temperature range varies by thermocouple type. Control accuracy -plus - minus 0.1 Degree C. Absolute accuracy of plus-minus…

  • TTD Outdoor-Use Digital On/Off Thermocouple Temperature Controller

    BriskHeat

    Product Highlights Easy-to-use digital controller with audible alarm Self contained, plug-and-play design Suitable for outdoor use (must be mounted vertically) Type K thermocouple input Specifications 120 or 240VAC 15 amps Digital On/Off controlling Units in…

  • VTF Digital Thermoregulators

    VELP

    The VTF uses Fuzzy Logic technology and is suitable for many applications where precise thermoregulation is required. The instrument can be combined with the most common hot plate stirrers and is ready for use. A user-friendly probe positioning system allows the operator to adjust the position…

  • Temperature Sensors, Pt100 type

    Ace Glass

    Pt100 (100ohm platinum wire resistance temperature detector) probes provide measurement over a temperature range of -20 degrees C to 550 degrees C. Less economical than J or K type probes, however they are not susceptible to drift, aging or corrosion. Supplied with male phone plug ends. Code -23…

  • Thermocouple Sensor, Julabo, Pt100

    Ace Glass

    Julabo Pt100 sensors in stainless steel or PTFE coated stainless

  • Digital Temperature Controllers, Controller Only

    Chemglass

    Economical temperature controller for applications that do not require the precise temperature (± 0.1°). Auto tune PID process controller for use with Chemglass oil baths or mantles up to 5L. Controller has 1500 watts of power and will control temperatures to ± 1.0°C.

  • Thermocouples, Type “J”, Liquid Immersion

    Chemglass

    Type “J” thermocouple (black) for use with oil baths or other liquid immersion applications. Thermocouple is supplied with a mini plug and a insulated and stainless steel overbraided cord. Thermocouples can be used to 370°C.

  • Thermocouple, J type, general use

    Ace Glass

    Type J, 24 gauge iron constantan thermocouple wire, PTFE insulated with bare junction bead. Supplied in 1.8 meter lengths, longer lengths available. Ends are bare for hook-up. For general use, pyrometers, controllers, etc.

  • X2-Series PID Temperature Controllers

    BriskHeat

    Product Highlights Compact, plug-and-play design Advanced PID control Simple three-key user control Type J or K thermocouple sensor input Key User Features Compact, plug and play design: 6.39”x9.48”x1.99” Simple three-key user control …

  • Temperature Sensor, J Type

    Ace Glass

    Type J temperature probes provide economical measurement from -20 degrees C to 550 degrees C. Probes available sheathed with stainless steel, inconel or simply insulated wire. Code -26 extension will allow the use of a controller up to 8 feet away. See code -27 for extra mini plugs.

  • Mini RTD Temperature Sensors

    BriskHeat

  • Temperature Sensors, K & T type

    Ace Glass

    Type K temperature probes provide economical measurement from -20 degrees C to 550 degrees C with more corrosion resistance than J type probes. Type T probes are commonly used for temperature ranges from -200 degrees C to 200 degrees C. Probes available with an inconel sheath or insulated wire.…

  • SDX Digital PID Temperature Controllers

    BriskHeat

    BriskHeat’s SDX Digital PID Temperature Controller, is a cut above the competition. This affordable, compact benchtop controller is ideal in a laboratory environment. Its smaller size makes it easy to move and set up wherever it’s needed. Universal voltage from 100 – 240 VAC with…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.