Lab Glass Stopcocks
-
Teflon Double Oblique Bore Stopcock
DWK Life Sciences (Kimble)With nut, washer and O-ring Two mm bore
-
Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.
-
SYNTHWARE High Vacuum Valve Plugs
Kemtech AmericaHigh Vacuum Valve Plug, Synthware, Size: 0-4, 0-8, and 0-12mm available, Stem Material: PTFE,O-rings Material: Viton.
-
Nalgene Polypropylene Straight Bore Stopcocks
Thermo Scientific NalgenePolypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing
-
SYNTHWARE Glass High Vacuum Double Oblique Bore Stopcocks
Kemtech AmericaStopcock, High Vacuum, Double Oblique, Synthware, Bore: 4mm, Plug Size: 17.35/50, Stem OD: 10mm, With solid glass plug, Precision ground with corresponding numbers on the barrel and the plug.
-
180° PTFE Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
SYNTHWARE High Vacuum Valves, Three-Way
Kemtech AmericaHigh Vacuum Valve, Three Way, Synthware, Size: 0-8 or 0-12mm available, Side Arm OD: 9mm.
-
PYREX® Brand Stoppers
CorningFull length stoppers, closed at bottom, with penny head Conform to ASTM Standard E 675
-
High Vacuum Double Oblique Stopcocks
ChemglassHollow plug, double oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated with a separate hole in the plug which is not in the line of flow.
-
Exposed O-ring Tip Valves
ChemglassVALVES, IN-LINE, EXPOSED O-RING TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, EXPOSED O-RING TIP, Hi-vac valve with three way configuration for use in construction…
-
Replacement Stopcock Plug
Ace GlassReplacement stopcock plugs with inlet feeds for rotary evaporators. Codes -08, -10 for Buchi assemblies and -20 for Heidolph 4000 series. All plugs are 19/38.
-
High Vacuum 90° 4mm Stopcock
ChemglassSimilar to CG-476, but with the sidearms sealed at a 90º angle to each other. Precision ground and hand-lapped with corresponding numbers on barrel and plug.
-
High Vacuum Double Oblique Stopcocks
ChemglassSolid glass high vacuum stopcock with the Chemglass constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily…
-
Replacement components for 1:5 taper PTFE plugs. O-rings are Viton, nuts are green, and washers are white.
-
PTFE Tip Valves
ChemglassPTFE TIPHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
Straight Bore 1-Arm Larger Stopcocks
ChemglassSimilar to CG-424 but with one arm of the stopcock being of a larger diameter. Larger arm facilitates construction of stronger apparatus such as separatory funnels and burets. Available complete with 1:5 taper PTFE plug or glass shell only. FOR REPLACEMENT PLUGS, SEE CG-424 LISTING
-
High vacuum stopcock, precision grade, with oblique bore hollow plug.
-
Easy action PTFE plug with hooded handle, threaded into heavy wall glass barrel, permits smooth adjustment. Arms are at 90 degree angle. Double PTFE ring seal prevents exposure of FETFE backup O-Ring to corrosive gases and liquids. Plug, with hooded ha
-
Adapter, PTFE Stopcock, Inner Drip Tip
Ace GlassStraight connecting PTFE stopcock adapter with standard taper joints. Bottom joint connection has an inner drip tip tube.
-
Chem-Vac™ Glass Portion Only Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has a single sidearm sealed at a 90º angle to the barrel. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE WITH COARSE THREAD.
-
-
S-Type Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
A 1:5 taper PTFE plug having a threaded needle valve to allow the adjustment of flow through the bore of the plug.
-
Stopcock adapter featuring either a bent or straight hose connection and a PTFE plug.
-
Chem-Vac™ Glass Portion Only 180° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 180º angle to one another and on the same plane. Heavy duty rounded coarse thread and precision formed tapered seat.
-
High Vacuum Single Oblique Stopcocks
ChemglassHollow plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated via a separate hole in the plug which is not in the line of flow.
-
T-Bore Glass Plug Pressure Stopcocks
ChemglassT-BORE, Similar to CG-458, but with three stems sealed 90º apart. Solid glass plug has a "T" shaped bore so that any two or all three arms can be connected at one time. Plug is precision ground and hand-lapped with corresponding numbers on the barrel and plug. DOUBLE OBLIQUE BORE,…
-
Teflon Straight Bore Stopcocks
DWK Life Sciences (Kimble)Complete with nut, O-ring, washer For replacement in glassware originally supplied with Teflon straight bore plugs
-
Stainless Steel Spigot
BürkleVery sturdy and robust spigot made of stainless steel AISI 304 (1.4301). The outlet of the spigot turns 360° so it can be adjusted to any required position. With a practical suspension device for filling container and eyelet for shutting off the spigot. Seals PTFE, FKM Self-closing …
-
Stopcocks
ChemglassFor replacement or construction of burets having a 1:5 PTFE stopcock plug. One arm is pulled to a delivery tip.
-
These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 3mm bore opening and have 8mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. The Rotaflo®…
-
Labeled Bench Service Stopcocks
Water Saver Faucet Co.Of chrome-plated brass Spring-loaded ground key stopcock with index labeled gas, air or vacuum Maximum recommended gas line pressure 10 psi (69 kPa) Have 3/8” i.p.t. male thread and serrated outlet 48 mm long, which tapers from 13 mm to 6 mm. Outlet bore 3 mm without flange.