Octagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…

This heavy duty PTFE stir bar is capable of mixing volumes up to a 50 gallon drum. Perfect for use with carboys up to 12 gallon. The bar will fit into a minimum neck diameter of 32mm. Manufactured with FDA-grade and USP Class VI PTFE.

Retriever Polytetrafluoroethylene 13” (1212V70 ) Product Dimensions (l x w x h) : 13.875x0.418x0in PTFE Stirring Bar Retriever 300 mm length for use with all stirring bars. Permanent powerful magnet encapsulated in PTFE and supplied with flexible PTFE rod.   Stir Bar…

These Corning magnetic stir bars are Teflon®-coated for increased chemical-resistance. Bars are available in 2” x 3/8” in. (5.08 x 0.95 cm) or 1” x 3/8” in. (2.54 x 0.95 cm).  1233W94 stir bars are suitable for use with PC610/620 stirrers while 1233W95 stir bars are for…

Micro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…

Produced from PTFE Central pivot ring ensures efficient spinning, even on curved or uneven bases

A variety of magnetic stirring bars from 159mm (6") to 10mm (0.5") bars are supported on the Garage. Wires on the upper half of the rack are arranged close together and designed to capture smaller magnetic stir bars; larger bars are captured on more widely spaced wires in the lower half…

Smooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008, as verified by SGS…

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Magnet permanently embedded in PTFE rod Ideal for retrieving magnetic stirrer bars from particularly sensitive or corrosive liquids

The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…

Spinbar® Magnetic Sink Strainer is a simple solution to prevent your Spinbar® Magnetic Stirring Bars from going down the sink drain. Four strong magnets attract and hold stir bars Four legs on the underside prevent strainer from being dislodged by flowing liquid Long slits in…

The retriever is placed against the vessel wall where the stirbar is located. Slide the retriever up along the vessel wall, and the stirring bar follows along the inside wall of the vessel up to a point where you can manually pick it up. The oblong section 25x70mm (1" x 2-3/4") houses the…

Contamination-free stirring-price justifies single use Four convenient sizes Disposable price Resistant to virtually all chemical attacks High-quality stirring bars molded with strong magnets permanently coated with white PTFE. Available in the four most popular sizes to…

Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

New developed, high-effective stirring bar, ideal for large mixing volumes, viscous media, stirring over wide distances or for disadvantageous vessel bottoms.More than 4x higher torque transmissible, unbeatableincreased mixing effect in comparison to conventional stirringbars, high energetic and…

Stir Bar Polygonal 108X27 mm (1212Z66) Product Dimensions (l x w x h) : 4.25x1.022x0in Extra Large Polygonal Stirring Bars. Polytetrafluoroethylene. 1 08 mm length. Heavy duty for stirring large volumes of liquids on large magnetic stirrers. Stir Bar Polygonal 159X27 mm …

Produced from PTFE For the stirring of liquids on magnetic stirrers and/or hotplate stirrers Strong alloy magnets sheathed in pure white inert PTFE Supplied in polarity aligned packs to ensure maximum coupling strength Resistant to virtually all chemical attack and temperatures up to 260°C

The smartSENSE® wireless stir bar is the only stir bar that can measure and communicate in real time the temperature of the liquid in which it is immersed – allowing for continuous control and monitoring of any formulation in a closed setup. Accuracy of the data is ensured by the embedded…

Spin Vane, Synthware, for 3.0 and 5.0 conical bottom mini vials, Magnet is encassed in PTFE.

Teflon-encapsulated, magnetic stirring bars

Spinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…

High quality octagon shaped stir bar with pivot ring, teflon coated magnet.

Produced from PTFE For use in small vessels, e.g. test tubes, vials, etc.

Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

350mm length magnetic bar retriever.

Easily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.

Stir Bar Kit - 16 Bars Product Dimensions (l x w x h) : 7.38x3.94x1.28in Polytetrafluoroethylene Stirring Bar Kit. Kit contains: (2) each 5/16 x 1/2 (8 x 13mm), (2) each 3/8 x 2 (9.5 x 51mm), (2) each 5/16 x 5/8 (8 x 16mm), (2) each 3/8" x 2 1/2 (9.5 x 64mm),(2) each 3/8 x 1 (9.5 x…

Stirring rods made of polypropylene, with both ends rounded.

High density polyethylene stirring paddle and handle available in stock and custom sizes. Small size plastic stir paddle is for use in stirring small volumes or for chemical mixing in photographic work. The larger size paddles are excellent for mixing liquids in large tanks or vats.

Spinwedge® magnetic stirring bars provide strong turbulence at fairly low speeds and are well suited for churning sediment or dissolving salts. Wedge shape is designed to plow up sediment for thorough dispersion Sharply angled broad face provides strong mixing action, perfect for…

Large to Small Volumes, the Spinpak® Assortment has You Covered A 10-pack of the most commonly used Spinbar® Octagonal Magnetic Stirring Bars in a variety of colors and sizes. Eight-sided Spinbar® Octagonal Magnetic Stirring Bars provide greater surface area and added…