SP Bel-Art Stir Bars
-
Scienceware® Stirring Bar Retrievers
SP Bel-ArtEasily recover stirring bars from containers using the Spinbar® Magnetic Retriever. Offered in two different lengths (12" and 18"), each retriever has a polyethylene rod, 9.5 mm diameter, with Alnico magnet sealed in one end and loop on opposite end.
-
Spinplus® Magnetic Stirring Bars
SP Bel-ArtSpinplus® magnetic stirring bars add speed and efficiency to mixing operations. The "+" shape creates a deep vortex and provides stable, quiet operation Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert …
-
Convenient assortment packs suit a variety of needs. Choose from octagonal, round, micro or color-coded bars to best suit your needs Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO…
-
Spinbar® Capsule Magnetic Stirring Bars
SP Bel-ArtThe Capsule Magnetic Stirring Bar is a polystyrene capsule containing a 30 x 8mm (1.18 x 0.31") polygon magnetic stirring bar that spins freely inside the capsule while being prevented from spinning off center and ‘wandering’ on the base of a vessel. Containment of the…
-
Designed for stirring large volumes in vessels such as drums and tanks. A molded pivot ring minimizes the contact area between the bar and the vessel, thus reducing friction and chattering. Marring of plastic containers is diminished Multifaceted surface adds turbulence relative to…
-
Spinring® Magnetic Stirring Bars
SP Bel-ArtSpinring® stirring bars provide maximum stabilization of the magnetic stirring bar with the addition of a removable “hoop” around a standard octagonal bar. Best suited for larger open-neck vessels, such as buckets and beakers Friction fit of the "hoop" and…
-
Circulus™ Magnetic Stirring Bars
SP Bel-ArtCirculus™ Magnetic Stirring Bars offer fast mixing action and strong turbulence as well as greater stability with less drifting at higher speeds. Ideal for containers with round or convex bottoms All sizes have solid FDA grade, USP Class VI Teflon® PTFE end disks 20mm…
-
Spinvane® Magnetic Stirring Bars half-round tapered shape is designed for conical bottom centrifuge tubes. Half-round shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Manufactured to fit 9.7/6.1 x 23.0 x 9.9mm tubes;…
-
Scienceware® Spinbar® Restrainer
SP Bel-ArtHolds on to magnetic stirring bar Easily retrieve magnetic stirring bars from vessels with the handheld Spinbar® Restrainer. Don’t lose magnetic stir bars down lab drains and eliminate the splashing hazard when pouring out of mixing containers. The tool fits comfortably…
-
Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…
-
These egg-shaped stirring bars are designed especially for use in round-bottom vessels as they spin unrestricted by the vessel contour. Particularly well suited for round bottom flasks; shape ensures complete mixing Offers minimal contact when used in plastic containers Egg shape…
-
Micro (Flea) Spinbar® Magnetic Stirring Bars
SP Bel-ArtMicro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…
-
These stir bars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008 facility, as…
-
Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps. Flexible white rod is 33cm (13") long Autoclavable
-
This bar’s high-energy magnetic material combined with a fluted octagonal shape produces exceptional power, although its length is only 50mm (1.969") with a 21mm (0.83") diameter. Ideal for viscous solutions and efficient, high speed stirring Samarium Cobalt magnet…
-
Spinpak® Magnetic Stirring Bar Assortment
SP Bel-ArtLarge to Small Volumes, the Spinpak® Assortment has You Covered A 10-pack of the most commonly used Spinbar® Octagonal Magnetic Stirring Bars in a variety of colors and sizes. Eight-sided Spinbar® Octagonal Magnetic Stirring Bars provide greater surface area and added…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Magnetic Stirring Bar External Retriever
SP Bel-ArtThe retriever is placed against the vessel wall where the stirbar is located. Slide the retriever up along the vessel wall, and the stirring bar follows along the inside wall of the vessel up to a point where you can manually pick it up. The oblong section 25x70mm (1" x 2-3/4") houses the…
-
Scienceware® Stirring Paddle
SP Bel-ArtFor Hand or Automated Mixing This stirring paddle is ideal for mixing liquids in large vats and tanks High density polyethylene Handle length: 91cm (3 feet); diameter: 25mm (1") Paddle dimensions: 7.6 x 15.2cm (3 x 6")
-
This magnetic stirring bar fits into the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without…
-
Scienceware® Magnetic Stirring Bar Arrester
SP Bel-ArtPrevents Stirring Bars from Pouring Out When Emptying Containers The Magnetic Stirring Bar Arrester holds your stirring bar in place when pouring from a beaker or flask by placing the arrester against the bottom of the container. 9.5mm (3/8") thick polyethylene 51mm (2")…
-
Double Spinfin® Magnetic Stirring Bars
SP Bel-ArtDouble Spinfin® Magnetic Stirring Bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Fins on top and bottom ensure complete agitation Maintains its position in a vessel and will not wobble Alnico magnet…
-
Spinfin® Magnetic Stirring Bars
SP Bel-ArtSpinfin® magnetic stirring bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Maintains its position in a vessel and will not wobble Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE…
-
Spinstar® Magnetic Stirring Bars
SP Bel-ArtSpinstar® magnetic stirring bars create a deep mixing vortex at relatively slow speeds. Star shape is designed to fit the inside diameter of most commonly-used beakers Perfect for applications requiring slow, thorough mixing Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Scienceware® Positioner-Retriever, PE
SP Bel-ArtSet the Spinbar® Magnetic Stirring Bar precisely where it is wanted with no splash using the Spinbar® Positioner/Retriever. Just as easily, retrieve stirbars without coming into contact with the liquid in the container. For recovering a Spinbar® Magnetic Stirring Bar, keep the…
-
Scienceware® Stirring Bar Garage
SP Bel-ArtA variety of magnetic stirring bars from 159mm (6") to 10mm (0.5") bars are supported on the Garage. Wires on the upper half of the rack are arranged close together and designed to capture smaller magnetic stir bars; larger bars are captured on more widely spaced wires in the lower half…
-
Two lengths to fit a wide range of vessels Autoclavable While many magnetic stirring bars are impeded by powders in a liquid, the Saturn Spinbar overcomes this problem. A large bulb in the bars center lifts the stirring bars ends while spinning thereby reducing surface contact area and…
-
Cylindrical Spinbar® Magnetic Stirring Bars
SP Bel-ArtCylindrical magnetic stirring bars offer excellent centering and smooth running characteristics. Small removable pivot ring in the center adds to their versatility Pivot ring minimizes the contact area of the bar to the vessel, reduces friction and lessens marring of plastic containers …
-
Plain Spinbar Magnetic Stirring Bars
SP Bel-ArtSmooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008, as verified by SGS…