Solutions, C, 20 L
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 1000 µS/cm
Reagents®Composition: Water 99.95%, Potassium Chloride 0.05% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Conductivity Standard 500 µS/cm
Reagents®Composition: Water 99.97%, Potassium Chloride 0.03% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Ricca Calcium Hydroxide TS (Saturated Aqueous Solution)
Ricca ChemicalCalcium hydroxide saturated solution in water USP Test Solution (TS).
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ceric Sulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 87.08%, Sulfuric Acid 8.06%, Ceric Sulfate 4.86% Boiling Point: Approximately 100°C Density: 1.09 Melting Point: Approximately 0°C Color: Orange liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 100 µS/cm
Reagents®Composition: Water 99.99%, Potassium Chloride 0.01% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Caustic Sensitivity Reagent, Volumetric
Reagents®Composition: Water 98.53%, Sodium Hydroxide 0.92%, Sodium Tetraborate Decahydrate 0.55% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: >10 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …
-
Conductivity Standard 200 µS/cm
Reagents®Composition: Water 99.99%, Potassium Chloride 0.01% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Potassium Chloride Conductivity Standard, 5000 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ricca Copper Sulfate
Ricca ChemicalThe minimum requirement of the American Association of Blood Banks (AABB) and the Food and Drug Administration (FDA) for suitable blood donors is 12.5 g/dL hemoglobin level or 38% packed cell volume (hematocrit) for fingerstick or venipuncture sampling methods. Copper Sulfate Solution, Specific…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 0.10N ceric ammonium sulfate in liquid form, is soluble in water and acids. Application: For Laboratory and Manufacturing Use Only
-
Continental Copper Solution, Volumetric
Reagents®Composition: Water 75.54%, Copper Sulfate Pentahydrate 20.64%, Hydrochloric Acid 3.82% Boiling Point: Approximately 100°C Density: 1.1 Color: Blue liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
Copper Sulfate, 0.01M, Standardized
Reagents®Concentration: 0.01M Composition: Water 99.75%, Copper Sulfate Pentahydrate 0.25% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Blue liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ceric Sulfate, 0.2500n Solution
GFS ChemicalsCerium(IV) sulfate, also called ceric sulfate, is an inorganic compound. These salts are solids that are soluble in water and dilute acids. Solutions of ceric sulfate have a strong yellow color. Ceric Sulfate is a powerful and versatile oxidizing agent that possesses certain advantages over…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Potassium Chloride Conductivity Standard, 74 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…