Chemicals Solutions C
-
Conductivity Standards
HamiltonHamilton offers conductivity standards whose stability of ±1% is guaranteed over a lifetime of up to 3 years. They can be used repeatedly under the condition that the bottle is not left open for more than 1 hour in total.
-
Traceable® conductivity standards are Certified Reference Materials, making one of the most accurate available All Oakton® Traceable® conductivity standards are NIST-traceable reference materials Supplied with a calibration report from an ISO 17034 and ISO 17025…
-
The LabChem chloroform-butanol reagent blends well with organic acids is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Conductivity Standards
Mettler ToledoPrecise Calibration and Verification Across the Whole Conductivity Range All METTLER TOLEDO's conductivity standards are traceable to certified international standard SRM NIST. To guarantee maximum traceability, an individual test certificate exists for every calibration solution. …
-
Calcium Chloride, 2.75% (w/v)
chemForce® (powered by Thomas Scientific)Harmonized #: 2827.20.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.02 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Conductivity Standard KCl 4000 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.79%, Potassium Chloride 0.21% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Conductivity Standard KCl 10 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 100%, Potassium Chloride 0% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Packaging Type: Poly Natural…
-
The Exaxol copper sulfate-sulfamic acid inhibitor solution is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Dissolved Oxygen
-
"Color Reference Solutions acc. to Ph Eur, Set of colors Y"
MilliporeSigmaGeneral description: contains Cobalt(II) chloride
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
-
84 µmhos/cm Conductivity Standards at 25°C
Inorganic VenturesInorganic Ventures' 84 µmhos/cm Conductivity at 25°C is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
100 µmhos/cm Conductivity at 25°C
Inorganic VenturesInorganic Ventures' 100 µmhos/cm Conductivity at 25°C is a 125 mL certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To…
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Caustic Sensitivity Reagent, Volumetric
Reagents®Composition: Water 98.53%, Sodium Hydroxide 0.92%, Sodium Tetraborate Decahydrate 0.55% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: >10 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …
-
-
Conductivity Standard 10 µS/cm
Reagents®Composition: Water 100%, Potassium Chloride 0% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Conductivity/TDS Standard Range: 10µS/cm …
-
Ricca Potassium Chloride Reference Solution A
Ricca ChemicalThe Ricca Chemical 500 mL potassium chloride reference solution A with composition of 92.90% water and 7.10% potassium chloride is suitable for use in electrolytic conductivity measurements and laboratory routines. It can be stored at a temperature of 15 to 30 degree C.
-
Potassium Chloride Conductivity Standard, 12.9 µS/cm at 25°C
Ricca ChemicalYou will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
SIGMA (2-Hydroxypropyl)-B-cyclodextrin solution,
MilliporeSigmaFormula: (C6H9O5)7 · (C3H7O)4.5 Storage: 2-8°C
-
Conductivity Standards
OhausFour conductivity standard solutions for calibration include: 10µS/cm, 84µS/cm, 1413µS/cm and 12.88mS/cm.
-
Copper Sulfate EPA 10% w/v
ExaxolThe Exaxol 10% w/v copper sulfate EPA is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Ricca Calcium Hydroxide TS (Saturated Aqueous Solution)
Ricca ChemicalCalcium hydroxide saturated solution in water USP Test Solution (TS).
-
Collodion (Parlodion), 2% in Amyl Acetate
Electron Microscopy SciencesHighly purified nitrocellulose (parlodion strip) in glass distilled amyl acetate. Useful for forming a negative replica to very fine detail. Two types are available: Our sterile formula which is filtered down to 0.45 micron and our non-sterile formula.
-
Ricca Congo Red Indicator
Ricca ChemicalThe Ricca Chemical congo red indicator is used as an acid-base indicator and helps in staining tissues for microscopic examination. This indicator turns red when used with alkalis and turns blue when used with acids.