The heavy duty, strong yet peelable heat seal for long-term storage and transporation.  The strongest protective seal of the range that offers high solvent resistance, wider integrity range (-200 degrees C to 110 degrees C) for polypropylene plates that is impenetrable by pipette tips and…

MicronPlus  adhesive sealing films have adhesive-free areas over the microplate wells so that the adhesive is not in contact with the well contents. The sealing films are made with color adhesives with outstanding chemical and temperature resistance.  The PTFE material is inert, optically…

Graded seals have 3 inches of quartz sealed to 4 inches of borosilicate.

Recommended for use in sealing culture tubes, flasks, petri dishes, etc., as it prevents culture media from drying out Pliable, self-sealing, moisture-proof, thermoplastic sheet material, substantially colorless Molds and seals itself tightly around test tubes, flasks and instruments and…

Support Film on grids has become a main product line for us since the demand for high quality coated grids has increased. To make your microscopy work easier and to save you a great deal of time we offer you a complete line. All of our coated grids are optically checked followed by batch testing in…

Pierceable Resealable Seal integrity range: -20 °C to 120 °C Good solvent resistance Autoclavable (121 °C) Use Seals polypropylene and polystyrene plates Suitable for long term storage

Peelable from polypropylene, polyethylene and COC plates Seal integrity range: -80 °C to 90 °C (110 °C when used with pressurized heated lid) Good solvent resistance including DMSO Autoclavable (121°C) Use Suitable for short term room temperature storage Suitable…

BRAND offers a wide selection of accessories for multiwell plates including lids and sealing films. In cases where the multiwell plate needs not only to be covered, but also securely sealed, self-adhesive films are available. These film sheets can be applied on the plates and removed without the…

Strong Transparent Peelable Non-Pierceable for PCR, low temperature storage and transportation Good solvent resistance Temperature range of -20 to +110C Can be used on polypropylene, polyethylene, polystyrene, and COC microplates

23A00U197: Gas permeable film for culture growth, cell assays, and cell screening. A 125µm thick porous seal formed by layers of non-woven rayon/acrylic fibers. This hydrophobic and gas permeable layer has average pore size from 10µm to 40µm, is backed with a medical-grade (non-cytotoxic)…

Heat Sealing PCR Foil for sealing plates Hermetic sealing of multiwall plates Recommended for low reaction volumes Best protection against evaporation during PCR Easily removable PCR Foil is pierceable and peelable

Non-pierceable Peelable Seal integrity range: -40 °C to 110 °C Use Applications: qPCR and other fluorescent applications, plate readers, microscopy and protein crystallization (96 or 384 well) Removal: will not leave a sticky residue on the plate surface following removal

Labcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…

AEP's exclusive GraterEdge blade offers superior cutting performance with unmatched durability and safety. The result is the industry's most efficient producer delivering the right cling for the tightest seal.

Azenta products are intended for sale/shipment within the US and Latin America only. All other International customers should contact their local Azenta distributor to place orders for Azenta products.

Designed for PCR and general storage. The film is made from heat-resistant polyester and is much easier to handle and apply than foils due to its rigidity. Universal fit for use with flat-top, raised-rim and deep-well polypropylene plates. Smaller dimensions and chamfered corners result in no plate…

Clear Heat Seal, Peelable Optically clear, ideal for PCR, qPCR, fluorescence detection, and colorimetric assays Seals PP, PS, PC, PE, and COC plates Peelable Seal integrity: -80°C to 80°C Can be used up to 110°C when using a PCR instrument with pressurized heated lid…

23A00U205: Aluminum heat seal film, peelable PCR foil Our peelable aluminum PCR foil bonds securely providing a very strong but peelable seal on raised rim plates. This seal offers complete seal integrity with compatible polypropylene and polypropylene/polystyrene (2-material) plates. Quick and…

Breathe-EASIER (a white non-woven rayon membrane) transmits water vapor 6 times faster than Breathe-EASY for accelerated growth. Membranes are ideal for cell growth, concentrating samples (e.g. freeze drying), and gas exchange. Easy microtube cap closure. Will not bind in centrifuge rotors. …

23A00U198: Clear seal Pre-Slit with 96-well printed alphanumeric. Our 100µm thick clear pre-slit and printed polypropylene film is the choice for those that need to access specific samples regularly. Having 96 individually printed alphanumeric well locations helps reduce the opportunity for…

The Microplate Sealing Tape is clear, self-sticking tape for standard microplates.  Suitable for both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporationand allow more vigorous mixing.…

Semi-pierceable, and leaves minimal residue. Polyester films just 25 mum thick, clearer and marginally pierceable with single-channel pipettes for sample recovery. Dimensions are 54.0 mm x 141.0 mm. Legal Information: ThinSeal is a trademark of Excel Scientific, Inc.

AlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…

Ideal for ELISA, Incubation and General Use Certified DNase- & RNase-free Designed to be used with both polystyrene and polypropylene plates Precision cut to a smaller dimension to seal a single 8-well row of a 96-well plate or an ELISA strip-well plate Each sheet contains 8…

Axygen® microplate heat sealing films are designed for applications ranging from PCR and Real-Time PCR to storage. They can be used in a wide range of temperatures making them suitable for nearly any application. Thickness: 100.5 µm Material: Polyester Dimensions (mm):…

A 140 mum thick hydrophobic porous sealing film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal(TM) sealing films minimize cross-contamination, spillage and evaporation. They allow uniform…

Thin Foil Heat Seal, Pierceable Appropriate for PCR and long-term compound storage Seals PP and PE plates Good solvent resistance Pierceable with pipette tips Autoclavable Seal integrity: -20°C to 120°C Certified free from DNase, RNase, nucleases and human gDNA

The QuickSeal Applicator System includes a re-usable applicator and two rolls of perforated film. Cost effective replacement rolls are sold separately. The applicator facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using…

Sealing Films prevent evaporation and protect samples during processing, storage and shipment. They have superior quality film and uniform adhesive with two perforated end tabs for accurate positioning films. Specifications: Are Packaged In Zipper Bags Material: 2ml Polyester …

Aluma Seal II Film are 1.5mil soft permeable aluminum foil with medical grade adhesive. It eliminates the need for heat sealing devices or mats during thermal cycling. Aluma Seal II has less of a tendency to roll back when removing the backing paper and conforms well to the plate during…