Acetate plate sealer NS is easy to apply and remove from microplates. In addition, this microplate sealing tape is suitable for all microplates for both short- and long-term storage, providing a tight seal to minimize evaporation and condensation. * Used for sealing multi-well plates and…

Sealing films prevent evaporation and protect samples during processing storage and shipment. They have superior quality film and uniform adhesive with 2 perforated end tabs for accurate positioning. Films are packaged in zipper bags. Manufactured from 2mL polyester. Specifications: …

Breathable Sealing Film for Tissue Culture Plates, Deep Well Plates and 96 Well Plates for Cell Growth. Certified DNase, RNase and Nucleic-acid-free.

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

Peelable Seal integrity range: -200 °C to 110 °C High solvent resistance Autoclavable (121 °C) Use Recommended for PCR, including with water bath thermal cyclers Seals polypropylene plates Suitable for long term storage and transportation Suitable for very low…

A soft aluminum foil film designed for the sealing of PCR plates minimizing evaporation and vapor loss during thermal cycling. The film pierces very easily for direct sample recovery with a multichannel pipettor or robotic metal probes without risk of aerosols, cross-contamination or significant…

Axygen® EASY PRESS is a manual device which provides simple and effective application of Axymats and/or Impermamats to 24, 48, 96 or 384 well microplates, deep well plates, microtiter tube systems and PCR plates. The EASY PRESS can be quickly adjusted to handle any size plate of varying heights…

With a 70 mum polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip…

DMSO resistant peelable heat sealing foil; suitable for low temperature storage, high temperature uses and PCR.  Key Features:  Peelable from all plate types.   Seal integrity range:  -80 degrees C to 110 degrees C.  Good solvent resistance including…

Sheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…

Clear peelable film with moderate solvent resistance.Features: Film, clear, peelable, good optical clarity, moderate solvent resistance, peelable, non-pierceable.Compatibility: Polypropylene (PP), Polyethylene (PE), Polystyrene (PS) & Cyclic Olefin Copolymer (COC) plates.Seal integrity range: -80C…

This type of material is ideal for manual sealing during PCR work and also for high throughput applications. Adhesive backing makes it easy to apply. Will resist temperatures from -86 °C to +105 °C. Pierceable with a pipet tip for easy access to sample. DMSO resistant. It is recommended to use…

Consists of a rubber coated dowel with a little give. The rubber allows better conformance of the film around the well area when sealing plates (Ensures sealing film covers all wells of a multiwell plate).

Pierceable foil seal with good solvent resistance.Features: Foil, high solvent resistance including DMSO, non-peelable, multiple sealing/re-sealing permissible, easy sealing surface identification, pierceable.Compatibility: Polypropylene (PP), Polystyrene (PS). Seal integrity range: -20C to…

ThermalSeal RTS(TM) sealing film is a 50 mum thick polyolefin with 50 mum inert encapsulated silicone adhesive. They are optically clear, with low autofluorescence, and are especially suited for real-time qPCR, storage, and protein crystallization applications. The encapsulated silicone adhesive is…

Peelable from all plate types Seal integrity range: -80 °C to 110 °C Good solvent resistance including DMSO Autoclavable (121°C) Use Suitable for short term room temperature storage Suitable for very low temperature storage

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

AlumaSeal CS sealing films are a specially formulated aluminum foil with a 50 mum layer of acrylic adhesive that withstands cold storage at temperatures between: -80 C to +120 C . Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or…

Eppendorf offers high-performance sealing options for nearly every application: for incubation and storage; colorimetric ELISA, fluorescence and luminescence experiments; sample processing and cell cultures; and for PCR and qPCR amplification. Features Storage Film and Foil glued…

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

Sealing films prevent evaporation and protect samples during processing storage and shipment. They have superior quality film and uniform adhesive with 2 perforated end tabs for accurate positioning. Films are packaged in zipper bags. Manufactured from 2mL polyester. Specifications: …

Labcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…

Designed for use with 96-Well microplates. Manufactured from PTFE. Packed in cases of 100

Seal integrity range: -80 °C to 110 °C 3 mm slits for gas transfer Use Seals polypropylene, polyethylene, polystyrene and cyclic olefin copolymer (COC) plates Suitable for insect and seed storage, short term incubation, and cell culture

Effectively seal all microplate formats For storage, PCR, microscopy, culture & protection Protective backing Pre-cut, plate-sized sheets

Axygen® microplate heat sealing films are designed for applications ranging from PCR and Real-Time PCR to storage. They can be used in a wide range of temperatures making them suitable for nearly any application. Thickness: 100.5 µm Material: Polyester Dimensions (mm):…

With a 70µm top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multi-channel pipettors and robotic probes. Dimensions are 79.4mm x 142.9mm for 96-well plates Clear zones and end tabs…

Azenta products are intended for sale/shipment within the US , Canada, and Latin America only. All other International customers should contact their local Azenta distributor to place orders for Azenta products.

MicronPlus  adhesive sealing films have adhesive-free areas over the microplate wells so that the adhesive is not in contact with the well contents. The sealing films are made with color adhesives with outstanding chemical and temperature resistance.  The PTFE material is inert, optically…

Durable, heat-resistant, solvent-proof laboratory sealing film Chemically resistant Heat resistant & Microwave compatible Tight sealing Tear resistant DuraSeal™ the durable, heat and solvent-resistant stretch film, has substantial advantages over common laboratory…