Distillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…

Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

Pre-packaged, turnkey 20 liter and 50 liter reaction systems for research and production purposes. Systems feature jacketed vessels, multi-neck flask heads, Universal support stand, and either a rod mounted brushless DC stir motor in our 20 liter (IKA Eurostar 60 Control) or a flange mounted 3/8 hp…

Across International replacement single-jacketed 20 liter glass reactor vessel, specially made for Across International R20, R50f and R100f series 20L, 50L and 100L jacketed glass filter reactors.

Use these electropolished stainless steel pressure vessels to propel filtration fluids through pressure holders by applying external pressure from compressed gases. Increasing pressure increases the efficiency of the EPR (ethylene propylene rubber) O-ring seal. Vessels feature 5-7⁄8"x…

Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…

Complete reaction assembly for sample volumes from 250ml to 1800ml. Included are three glass reactors [9837-20,9833-12,9833-16], power supply with converter [9810-24], 3/4in horn [9814-27], 3/4in extender [9816-08], (3) bushings [7506-12] and clamp ([9825-21].

Complete reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU…

Six-Neck lid for 200mm flanged vessel. Lid has 45/50 center neck, four 45/50 side necks and a 60mm angled flange for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.

Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…

Heavy wall pressure vessel is the same as CG-1880, but shaped similar to a round bottom flask with a #25 internal thread for use with a PTFE bushing as a pressure seal. Complete apparatus is supplied with vessel, back seal solid PTFE bushing and viton o-ring. Other vessel sizes and safety plastic…

Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum

Unique baffle system for benchtop process reactors from 300mL to 5L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed stainless steel provides excellent strength and chemical durability. Features: Adjustable Rectangular…

Five neck reaction vessel lid for 150mm flanged vessels. Lid has a 29/42 outer CN, (2) 34/45 outer SN & (1) Vertical 45/50 outer SN and (1) 45/50 outer SN angled 20°; for powder addition.

Across International replacement double-jacketed glass reactor vessels, specially made for Across International R20, R50 and R100 series 20L, 50L and 100L jacketed glass filter reactors.

Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…

For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…

Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.

Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…

Unique glass baffle system for process reactors from 2L to 50L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter.  …

PTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…

Ai R-ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…

Cylindrical shaped tube useful for storage or simple reactions with a standard taper inner joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.

The Ai jacketed filter glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment, jacketed filter reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale…

Ai ETL C1D1 Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor

Turn-key reactor system featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet. Vessel top has a 25mm Ace-thred center neck and various multi-neck configurations. System is designed to perform positive pressure reactions at up…

Jacketed large scale process reaction vessels. The 50 and 100L vessels have a 400mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964 and CG-1969-A beaded pipe adapters. Reactors have a 3"; beaded pipe valve that is detachable. These flush…

Features: Oversized Rugged S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Motor Mount for Electric, Air, or XP Motors with the Ability to Unlock and Swing Out Giving…

Complete, one-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm…

Thomas No. 1160V24 This kit contains 1 reaction block (24x 2ml vial, 32X 0.3ml vial, 4X 2Dram vial), 1 decapper for 8 mm crimped vial and 1 syringe Hamilton 81000. Thomas No. 1160V25 1 reaction block (24x 2ml vial, 32x 0.3ml vial, 4x 2Dram vial) Thomas No. 1160V26 1…

Four neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.