pH & Ion Electrodes
-
High Performance Ammonia Electrode
Thermo Scientific OrionDesigned to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed…
-
InLab® pH Half-Cells
Mettler ToledoUseful Helpers - When Two are Better Than One In some cases it is advisable to use a separate pH half-cell and reference electrode instead of a combined pH sensor. pH half-cells are recommended for applications in which the service life of the pH electrode is significantly less than that of…
-
Dry Contact Technology Dry Contact Technology replaces traditional liquid or gel-filled ISE's. Dry contact electrodes require no preconditioning. Simply place electrode in a sample and read results. This innovative technology offers unlimited shelf life and greater measurement stability. …
-
The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature. Combine…
-
Standard Ag/AgCl pH electrodes
Thermo Scientific OrionIdeal for all routine pH measurements. A large variety of quality electrodes for a wide range of applications. Includes specialty pH electrodes for unique or challenging pH measurements.
-
Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…
-
Waterproof Green pH Electrodes
Thermo Scientific OrionFree of lead and mercury unlike many pH electrodes allowing easy disposal Meets all RoHS requirements Durable plastic body that can be used under rugged conditions Waterproof BNC connector is impervious to water Orion green electrodes offer a lab or field pH electrode that…
-
InLab® Glass pH Electrodes
Mettler ToledoMETTLER TOLEDO Glass pH Electrodes Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler distributor to place orders for Mettler products.
-
Electrode Care
OaktonSolutions to clean, store and fill electrodes Extend the life of your electrodes and maintain accurate readings Use cleaning and storage solution with any pH or ORP electrodes Electrode storage solution keeps pH/ORP electrode bulbs moist for faster, more accurate readings. Use…
-
Solid State Technology Low maintenance High accuracy Robust, rugged and reliable Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included…
-
Orion Total Alkalinity Test Kit
Thermo Scientific OrionSave time by eliminating additional equipment set-up, titrations and calculations. The Thermo Scientific™ Orion™ Total Alkalinity Test Kit provides two-step direct measurement of total alkalinity and pH using a pH electrode. Direct reading of total alkalinity from 0 to 200ppm as…
-
Reference Electrodes For ISEs
Thermo Scientific Orion4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …
-
Dry Contact Technology Dry Contact Technology replaces traditional liquid or gel-filled ISE's. Dry contact electrodes require no preconditioning. Simply place electrode in a sample and read results. This innovative technology offers unlimited shelf life and greater measurement stability. …
-
Orion Filling Solution
Thermo Scientific OrionThermo Scientific Orion filling solutions for use with pH electrodes and reference electrodes. Filling solutions are packaged as five 2 oz. (5 x 60mL) bottles.
-
Micro-pH Combination Electrode, NMR, Thermo Orion 9826BN
Thermo Scientific OrionImmersion depth is 2 mm, designed for NMR cells. pH range is 0-14. Temperature range is -5 to 100°C. Dimensions: 228 mm x 2.5 mm; tip diameter: 2.5 mm. Type reference: Ag/AgCl.
-
Inlab Power Pro-Ism
Mettler ToledoThe new InLab® Power Pro ISM uses the SteadyForce™ system, ensuring a connection to the measurement medium. With the InLab® Power Pro ISM, you can concentrate on the actual measuring. The dual channel portable meters SevenGo Duo™ and SevenGo Duo pro™, have the ability…
-
Nitrate Sensing Module
Thermo Scientific OrionReplacement Module for Nitrate Half-Cell Electrode (9307BNWP).
-
DGi115-SC Plug & Play Combined Glass pH Electrode
Mettler ToledoPlug & Play combined glass pH electrode with a fixed ground-glass sleeve junction. The large sleeve junction provides a stable measurement signal thanks to a uniform flow of electrolyte. The junction is hardly blocked by precipitates and is easy to clean. Direct pH measurement and acid/base…
-
1198F14: ScienceLine Temp 135; temperature sensor, stainless steel, 1 banana plug, NTC 30 kOhm. Dimensions = 120 mm length; 4 mm OD. 1198F15: ScienceLine Temp 136; temperature sensor, glass, 1 banana plug, NTC 30 kOhm. Dimensions = 120 mm length; 6 mm OD.
-
Single Pore Glass pH Electrodes
HamiltonUsing Hamilton's patented Single Pore design, the Single Pore Glass has the highest accuracy and fastest response time. Widely applicable, it is great for use in emulsions, ion-weak media or general laboratory applications. Benefits Highest accuracy and fast response time thanks to the…
-
Replacement Electrodes and Probes
Milwaukee InstrumentsMilwaukee has a wide assortment of pH, ORP, Conductivity and other specialty sensors to meet all your specific requirements. Finding the right electrode for a specific application is a very important task and in order to solve this selection problem it is important to consider the following:…
-
Orion™ Online ATC Probes
Thermo Scientific OrionTake pH measurements that are automatically corrected for variation in electrode slope due to temperature change. The Thermo Scientific™ Orion™ Online ATC Probe features stripped, non-terminated ends and an unbreakable stainless-steel body to withstand rigorous use. Designed for…
-
Combination PEI-Body pH Electrodes
Hanna InstrumentsHANNA offers a wide range of combination pH and ORP electrodes specifically designed for needs of industrial users. In order to reduce contamination problems, all electrodes are gel or polymer filled and feature double-junction technology. The BNC connector allows quick and easy connection to…
-
ATC-01 Temperature Electrode
labForce® (powered by Thomas Scientific)The labForce® ATC-01 Temperature Probe/Electrode is ideal for use along with pH or conductivity electrode for temperature compensation to achieve automatic temperature compensation. Technical Specifications Material: Stainless Steel Temperature Range: -10 to 110°C (14 to…
-
PHE-10 Blade pH Electrode, stainless steel sheath and blade, ideal for meats
labForce® (powered by Thomas Scientific)The PHE-10 Blade pH Electrode uses a durable food-grade stainless steel sheath and blade, solid electrolyte, and long-life reference system, making the probe hard to contaminate and maintenance-free. Ideal for measuring pH of meat such as fish, meat, and other meat products. The electrode uses a…
-
Orion A Series Stainless Steel Atc Probe
Thermo Scientific OrionAutomatically correct pH measurements for variation in electrode slope due to temperature change using Thermo Scientific™ Orion™ Stainless-Steel Automatic Temperature Compensation (ATC) Probes. Stainless-steel body For A+ series meters
-
Built-in temperature sensor lets you take ATC readings with a single probe Includes a FREE electrode saver bottle to extend electrode life Feature a BNC connector for pH and a waterproof 6-pin connector for temperature All-in-One Waterproof electrodes feature a built-in…
-
BlueLine 24 pH Combination Electrode
SI AnalyticsBlueLine combination electrode, Plastic shaft, fibre-junction, gel electrolyte, Ag/AgCl-reference system, temp.-sensor NTC 30 kOhm, cylinder membrane, A glass, 1 m fixed cable with DIN- +4-mm banana plug, length 120 mm, 12 mm Ø, -5...+80 °C, 0...14 pH
-
DGi116-Solvent Plug & Play Combined Glass pH Electrode
Mettler ToledoCombined glass pH electrode with a movable easy-to-clean glass sleeve junction. Plug & Play sensor with integrated sensor chip for secure handling. Especially suitable for acid/base titrations that require fast response times and quick signal equilibration in nonaqueous matrices: …
-
Use With: Oakton 600 series meters
-
N 65: pH Combination Electrode with Plug Head
SI AnalyticspH combination electrode with plug head, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sphere membrane, A-glass, tapper NS 14.5, length 103 mm 10 mm Ø, -5...+100 °C, 0...14 pH
-
TRUEscience Redox Combination Electrodes
TRUEscienceTRUEscience Item No. 1205230 TRUEscience Epoxy Redox Combination Electrode S7. Ceramic single junction silver/silver chloride reference Electrode only with electrode soaker bottle and storage solution 1x TRUEscience Epoxy Redox Combination Electrode with S7 connector 1x soaker bottle…
