Narrow Mouth Bottles, Supplies
-
Sterile, PETG Square Media Bottles
Thermo Scientific NalgeneSterile, polyethylene terephthalate copolyester (PETG) media bottles Nalgene 2019 series Bottles provide reduced permeability to CO2/O2 to minimize outgassing and pH shifts; especially suited for media storage Transparent, radiation-sterilized, non-cytotoxic and…
-
60ML CAPACITY Industrial quality reagent bottle with a 60ml capacity. Excellent for storing chemicals, liquids or powders SUPERIOR DURABILITY The rigid polypropylene construction provides excellent chemical resistance to acids, alcohols & alkalis, and very good resistance to aldehydes and…
-
HDPE Narrow Mouth Laboratory Bottles
labForce® (powered by Thomas Scientific)labForce® High Density Polyethylene (HDPE) Narrow Mouth Laboratory Bottles meet the requirements and expectations of the most exacting users. Made from virgin HDPE resin, labForce® bottles are durable and break resistant eliminating the shatter risk of glass bottles. The narrow mouth…
-
Nalgene Narrow Mouth Natural HDPE Bottles
Thermo Scientific NalgeneNALGENE® wide mouth natural HDPE bottles are suitable for water and wastewater samples. I-CHEM Certified® to meet the EPAs Performance Based Specifications for metals analysis and water quality parameters
-
Low Particulate/Low Metals Bottles
Thermo Scientific NalgeneTeflon FEP Tefzel ETFE Screw Closure Narrow-mouth bottles with a particle level of less than 20 particles per ml at 0.3µm and greater Each bottle is double bagged under Class 10 laminar flow hoods inside a Class 100 clean room Excellent for storing high-purity chemicals …
-
Nalgene™ Natural HDPE Diagnostic Bottles
Thermo Scientific NalgeneStore and ship small volume, valuable reagents with Thermo Scientific™ Nalgene™ Natural HDPE Diagnostic Bottles without Closure, for use in test kits and small-volume applications. These high-density polyethylene bottles are packed without closures so they can be matched with various…
-
Diagnostic Bottle, Narrow Mouth
Thermo Scientific NalgeneMaterials: Polythylene terephthalate copolyester with lined white high-density polyethylene closure Ideal for sterile sampling, storage and shipment of reagents and buffer solutions. Bottles are sterile to 10-6 SAL, non-pyrogenic, non-cytotoxic, and comply with USP VI guidelines.
-
Narrow-Mouth PPCO Packaging Bottles
Thermo Scientific NalgeneStore, ship and package liquids with Thermo Scientific™ Nalgene™ Narrow-Mouth PPCO Packaging Bottles with Closure. Featuring excellent clarity, impact and chemical resistance, these polypropylene copolymer bottles have a robust construction for packaging use and are featured with…
-
HDPE Narrow Mouth Reagent Bottles
United Scientific SuppliesUniStore™ Narrow Mouth, HDPE, reagent bottles are manufactured from USP Class VI resin that is FDA-21CFR compliant. Excellent chemical resistance to most acids, bases, and alcohols. Polypropylene caps are included. Manufactured from USP Class VI resin that is FDA-21CFR compliant…
-
Screened white enamel graduations Sterilized by gamma radiation Large white marking spot Break resistant polycarbonate material 45 mm size cap provide greater access for liquid transfer Bottles can be autoclaved once at 121°C and 15 psi Easy opening packaging Available in…
-
This bottle is supplied with polypropylene screw closures. Unbreakable, convenient design. For storage, packaging and other uses. Maximum temperature for LDPE is 80°C.
-
PFA Narrow Mouth Reagent Bottles
BrandTech®These leach-resistant bottles are excellent for long term storage of solvents and trace analysis standards. They are manufactured from perfluoxy copolymer (PFA) for excellent resistance to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and…
-
Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned) Containers are processed according to EPA recommended wash procedures. Washed with…
-
HDPE Large Square Storage Bottles
Thermo Scientific NalgeneNalge 2123 Provides chemical resistance and durability Leakproof Bottles are excellent for collecting, storing and transporting dry chemicals, environmental samples, reagents and distilled water. Molded-in hand grips provide greater convenience and safety when pouring. Square shape saves space…
-
Amber Glass Jugs
QorpakAmber Glass Jugs with molded finger grips are the perfect storage solution for light sensitive products. Amber glass protects against harmful UV rays. Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process.
-
Amber Narrow Mouth Bottles
DWK Life Sciences (Wheaton)Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests…
-
HDPE bulk cyliner round bottles are used in water quality analysis. Bottles are uncertified. Closures are sold separately.
-
Nalgene Narrow Mouth Economy HDPE Bottles Bulk-Packed
Thermo Scientific NalgeneThermo Scientific™ Nalgene Narrow-Mouth Economy Bottle Bulk Packs are constructed of break-resistant translucent HDPE. These durable, break-resistant bottles are a lightweight version of the original Nalgene Lab Quality bottle, suitable for light-duty, general-purpose applications where…
-
Sterile PETG Diagnostic Bottles
Thermo Scientific NalgeneFor sterile sampling, storage and shipment Biologically tested. Ideal for sterile sampling, storage and shipment of reagents Closures attached Sterile 10 -6 SAL These single-use bottles are non-pyrogenic and non-cytotoxic, reducing the chance of cross-contamination. Bottles and 20-mm lined…
-
HDPE Bottles KaptClean®
QorpakHDPE Bottles KaptClean® for Metals meet or exceed analyte specifications. Bottles are pre-cleaned based on OSWER (Office of Solid Waste and Emergency Response) directives from the EPA (Environmental Protection Agency). Suggested for metal, cyanide, sulfide, and fluoride analysis. All pre-cleaned…
-
Reservoir, Bottom Hose Outlet, Tooled Top, Narrow Mouth for Rubber Stopper…
DWK Life Sciences (Kimble)KimCote® plastic-coated reservoir bottle. KIMAX glass hose connection outlet is fused to the bottle. Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8" I.D. tubing. With white enamel marking spot. Glass conforms to ASTM E438, Type I, Class A.
-
-
Reagent Bottles
United Scientific SuppliesThese large capacity reagent bottles feature narrow mouths, integrated shoulder loops (except 2L) and include a lined HDPE cap for a tight seal. Constructed of polypropylene, the bottles are translucent, pliable, and have excellent strength for extended use. Ideal for packing, shipping…
-
Clear Glass Bottles
DWK Life Sciences (Wheaton)Clear bottles are made from borosilicate glass Amber bottles are square, round or jug handled Amber glass bottles are available safety coated Square polyethylene bottles are available in 250 - 2500 mL size
-
Tamper evident bottles. High-density Polyethylene. The tamper-evident cap incorporates a safety ring which is secured when the cap is screwed on to the bottle. Opening the bottle breaks the safety ring, showing signs of interference.
-
Autoclavable PP lab style bottles are made from medical grade resin conforming to USP Class VI. These translucent bottles are supplied with Linerless leak-proof caps enclosed
-
Narrow-Mouth Amber HDPE Packaging Bottles
Thermo Scientific NalgeneThermo Scientific Nalgene HDPE Amber Packaging Bottles have amber PP closures and narrow mouths. HDPE packaging bottles are ideal for diagnostics, biologicals, specialty chemicals, reagents, adhesives and veterinary pharmaceuticals. Injection blow-molded for uniform wall thickness and…
-
Leakproof, rigid and translucent these high-density Polyethylene narrow mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products.
-
High-Density Polyethylene Square Media Bottles
Thermo Scientific NalgeneNarrow mouth, high-density polyethylene Nalge 2018 series Economical, most chemical and break resistant of all Nalge square bottles High-density polyethylene bottles have polypropylene screw cap and leakproof closure Usable from -100° to 120°C (-148° to 248°F); not autoclavable
-
Clear Narrow Mouth Septum Bottle, Precleaned
J.G. FinneranPreassembled with PTFE/Silicione-lined open top black polypropylene closures. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2:…
-
Bottle Narrow Mouth HDPE 500 ml
Thermo Scientific NalgeneThermo Scientific™ Nalgene Lab Quality Bottles are specifically designed for demanding lab use. Thermo Scientific Nalgene Lab Quality Narrow-Mouth bottles are all-purpose Boston round bottles that are highly reliable and durable for long-term use. Ideal for storing, shipping and…
-
Polypropylene, Large-Capacity Square Storage Bottles
Thermo Scientific NalgeneNalge 2122 Suitable for storing and sterilizing contaminated slides For storage of solid materials, not leakproof Autoclavable, 1 gallon capacity with cap size 100 Molded depressions for gripping before autoclaving, place cap on top of bottle without engaging threads