Mantles, Heating

Compare Tool

Select up to 3 products

HomeAll Products

Mantles, Heating

1 - 32 of 61
Sort
View
Show
  • Heaters

    Glas-Col

    Griffin beaker heaters Maximum internal temperature 450°C Resilient and pliable interior, which cradles fragile beakers Heat is concentrated at the bottom, so even small liquid volumes can be heated Glass cloth mantle conforms to shape of beaker for even application of heat Controller…

  • 1-Way Heating Controllers

    Electrothermal (Cole-Parmer)

    Electrothermal offers 3 different models of 1-Way Heating Controllers which operate up to 800W (MC5), 1800W (MC242) or 2300W (MC227); MC228X1 is the 115V version of MC227 and operates up to a maximum of 1100W. These heating controllers can control one piece of laboratory equipment at a time, or an…

  • Product Highlights Self-supporting: can be placed directly on counter top Easy viewing of flask contents Stackable for easy storage Includes 6-foot (1.8m) power cord with either a NEMA 1-15 (for 120VAC) or NEMA 6-15 (for 240VAC) plug Temperature controller is…

  • Heating Mantles

    Across International

    Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds. The DigiM mantle is equipped with two sets of thermocouples for proper…

  • Digi-Mantles

    Electrothermal (Cole-Parmer)

    Digi-Mantles enable a round bottom flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to…

  • Splashguard

    Glas-Col

    Splash Guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (Series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

  • Thomas No. 1197F52 is lightweight benchtop unit with cylindrical steel housings (3 3/4 × 3 1/2 in..), gray epoxy finish, polyurethane feet, pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Cole-Parmer)

    Incorporates a stirring module that allows the solution to be stirred and heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to…

  • BriskHeat HM Metal-Housed Heating Mantles are fiberglass insulated round bottom flask heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating…

  • Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

  • Combination Heating Mantles

    United Scientific Supplies

    HM2000 series combination mantles are ideal for repetitive extracting, refluxing, and distillation applications. Units feature space saving built-in electronic power regulator knobs. Available in 3-place and 6-place configurations for maximum safety and convenience. Each unit includes 1 each…

  • Provides a safety backup for lab heating processes Compact, 1/16 DIN unit Allows for over-temperature limiting Terminates primary control when temperature exceeds set limit Model 5916A30 will accommodate a non-conductive load to 1200 watts; Model 5916A35 to 2400 watts.…

  • CMU Uncontrolled Electromantles™

    Electrothermal (Cole-Parmer)

    CMU Uncontrolled Electromantles CMU heating mantles are used in wet chemistry to heat liquids in round bottom flasks. The metal case is designed to remain "cool-to-the-touch" when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the…

  • User friendly microprocessor-based ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control…

  • The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.

  • Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…

  • Micro Mantles

    Glas-Col

    The mantle is used extensively in analytical work and in purification of research products with only small samples available. In sizes for spherical flasks 5 to 35mL and pear-shaped flasks 5-250mL. Certification: All 115 volt units are CSA certified. Electrical: Separable 3-ft.,…

  • Product Highlights Ideal for preventing vapor condensation in upper half of flask Excellent alternative to other heating methods like a bunsen burner Opening holds 1, 2, or 3 neck flasks on ring stand Specifications Fiberglass cloth outer shell Uniform, low-watt…

  • For use with Thomas 5912L10 series Synchronizes the rotation of the magnetic fields with its solid-state electronic controls Fine control of stirring speed; there is almost no variation; no speed increase in warming or slowdown in cooling Can be reproducibly set to any given speed; range 50…

  • Our controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. All units are supplied with a…

  • Similar to CG-15005-01, but the voltage output can be adjusted between 30 and 60V. Controller is 4"; W x 5"; D x 3.7 "; H. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptcle and lighted power switch. Controller for use with CG-14000 and CG-14002…

  • Manually adjustable; has a percentage-timer design and no sensing element Regulates mantles, tapes and cords, as well as small furnaces, ovens, hot plates, dies and other applications requiring stepless control Can be used on any non-inductive loads to its rated capacity of 1,440 watts …

  • Electromantle® EMV and EMX Heating Mantles

    Electrothermal (Cole-Parmer)

    EMX Spill-proof Electromantles and EMV V-shaped Electromantles may accommodate 60° funnels, pear-shaped or round botom flasks. They have been designed to accept a large range of flasks and funnel sizes for added flexibility. The stainless steel screen on all EMV models covers the heater…

  • The Ai ultra-thick 400°C HeatedShield flask cover will keep your distillation setup at the peak of its performance. Prevents vapor condensation in the upper half of a flask and protects the flask and its contents from drafts, which would distrub the reflux ration during fractionation. It…

  • This mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The tops are designed for use with Series M, TM, or STM mantles. They protect the flask, the solutions, and the laboratory from drafts, which would disturb the reflux ration…

  • Glas-Col stocks a variety of the most popular sizes in the three most popular calibrations J, K, and T. These sensors are manufactured to strict specifications using standard limits of error grade wire and 316L grade stainless steel for high corrosion resistance. PTFE Coated thermocouples should…

  • The ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…

  • Splashguard

    Glas-Col

    Splash Guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (Series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

  • The CMUT Electromantle is a multiple volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Controlled Electromantles. The CMUT Electromantle is used in wet chemistry to heat liquids in round…

  • Extension supports should be used with smaller heating mantles The extension support attached to a stable ring stand or distillation rack can be adjusted to any convenient height Steel ring construction with a 6" shank

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.