Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. You can completely empty the contents of these straight sided jars. Choice of three caps: The F-217 foam lined cap provides a seal with the least oxygen transfer The poly cone lined…

With attached polypropylene cap Durable container with good chemical resistance 30 to 1000 mL sizes Pre-attached caps available lined or unlined Autoclavable General storage containers are suitable for use with powders and solids.  The large surface area on these jars makes it easy to label,…

Designed for collecting soil, sludge, waste and water samples for a variety of organic and inorganic target analytes where light protection is required. Thermo Scientific™ Wide-Mouth Amber Glass Packers are available Certified to meet EPA performance-based specifications for semi-volatile…

Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. The amber color protects light sensitive materials. The PTFE lined cap is inert making it a great option for use with strong acids and corrosive materials. The F-217 Foam liners seal with the…

Preassembled with ultrasonically welded PTFE/Silicione-liner. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned)…

Plastic snap cap vials are molded of rigid-wall FDA compliant styrene with tight fitting polyethylene snap-on caps. Plastic snap cap container vials are excellent for storing dry materials, powders, tablets, etc. There are approximately 16 drams per fluid ounce. 7 dram size may be used with…

Preassembled with ultrasonically welded PTFE/Silicione-liner. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned)…

Short wide-mouth septa jars are suitable for soil sampling. Available in clear or amber Type III glass with open-top polypropylene closures bonded with a 0.045 in. thick PTFE/silicone septa. Now available tare weighted in the 60 mL size. I-CHEM Certified® 200 and 300 series bottles are…

Nalge 5242 Polyethylene Jars Cross-linked, high density polyethylene resilient; safer than glass. Tough, stiff, seamless jars resist stress-cracking. Ideal for soaking glassware, washing pipets with corresponding rinsers and baskets (see Thomas number 7792H78 in Pipets, Accessories). All sizes…

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Borosilicate glass Base does not extend beyond body Used to display materials, particularly at exhibits and medical schools Fitted corks are included

White, opaque jars with tight-fitting lids Designed to simplify and standardize the handling and storage of specimens Excellent chemical resistance Cannot be attacked by formaldehyde, weak acids or bases. Resist freezing or boiling temperatures. Easily disposable but sturdy enough for reuse.

Preassembled with ultrasonically welded PTFE/Silicione-liner. Available in standard, precleaned, or precleaned/certified in accordance with recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment. CLASS 2: (Precleaned)…

Polycarbonate Jars are transparent, as well as temperature and impact resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents.

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Short, wide mouth clear Type III glass closed-top jar is suitable for soil sampling. PTFE liner is friction fit in place to the polypropylene closure and easy to replace if necessary.  Meets the EPA’s Performance Based Specifications for Volatile Organic Analysis.

Closures available with additional lining materials. CLASS 1: (Standard) Containers are assembled with liner and closure without washing treatment.

QEC’s wide mouth straight-sided jars are excellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page: …

Nalge 5300 jars with covers Completely transparent, multipurpose containers with high-impact strength Excellent for use as water baths, aquaria, terraria or freeze-drying chambers Autoclavable Usable at temperatures up to +135°C Walls are 3 mm thick; can be…

Tall, wide mouth clear Type III glass closed-top jar is suitable for multiple uses. PTFE liner is friction fit in place to the polypropylene closure and easy to replace if necessary.  Meets the EPA’s Performance Based Specifications for Volatile Organic Analysis.

Easy to clean Stainless steel Sterilizable Covers included

Purchasing assembled sampling containers reduces the chance of contamination. These wide mouth jars are used for creams, pastes and solids. The contents can be easily removed from the straight sided jar. The F-217 foam lined caps seal with the least oxygen transfer.

Autoclavable at 121°C Heavy walled, with standard Mason threaded neck Polypropylene screw cap has sealing ring and grip lugs

With Caps with Tinfoil Liners Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type-III Soda Lime Glass

Supplied with white polypropylene screw closures “Glass-clear” polypropylene jars have many uses in the lab and industry. Lightweight and easy to fill. Maximum temperature for polpropylene is 121°C.

Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type III soda-lime glass Choose from Convenience Packs and Bulk Packs in a variety of cap / liner combinations.

Crystal clear storage for dry or liquid products. Jars withstand extreme temperatures of 0° to 930°F Wide mouth for easy pouring and filling Plastic lids for general purpose use FDA compliant Caps included

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. You can completely empty the contents from these straight sided jars. The amber color protects the contents from UV Light. The PTFE liner is inert making it an excellent choice to use with strong…

Isostatically molded in pure, FDA approved, PTFE. Guaranteed chemically resistant and inert. Heavy wall construction. Suitable for IPA Method 1311 TCLP

This polypropylene jar improves on the classic tapered square design with a larger opening for easier placement and removal of slides. The polypropylene screw cap is 5.3cm in diameter, has a flat top, easy grip knurled edge, deep thread and a seal ring to prevent leaks. Five internal slots…