ICP-MS, Chemicals, PerkinElmer
-
Optical Kit for Avio 500
PerkinElmerThis Kit includes: Viton ® O-Ring 20.29 mm I.D. (09210598) O-Ring 29.74 mm I.D. (09902131) O-Ring 36.09 mm I.D. (09921058) O-Ring 26.57 mm I.D. (09921062) Round Window 31.75 mm Diameter (09992731) Tube Assembly - Century B Radial View (09992731)
-
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
The GemCone low-flow nebulizer permits lower nebulizer flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma. The nebulizer is optimized for low nebulizer gas flow for use with cyclonic spray chambers. It requires an end cap (N0680504) for use…
-
This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting…
-
Concentric Quartz Nebulizer, MEINHARD Type A3
PerkinElmerThe MEINHARD concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control.
-
The D-Torch is a revolutionary new demountable torch design with interchangeable outer Tubes. Quartz outer Tubes are ideal for most aqueous samples, while ceramic outer Tubes last longer for samples with high dissolving solids or for organic applications, such as wear metals in engine oils. This…
-
3-Slot Quartz Organics Torch for Optima 7300 V
PerkinElmerDemountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
Consumables Kit for ELAN DRC-e/9000
PerkinElmerThis kit includes: ELAN Cross-Flow Nebulizer Tip Kit, Qty. 1 (N8120515) 0-Slot Quartz Torch, Qty. 1 (N8122006) 2.00 mm I.D. Alumina Injector, Qty. 1 (N8126041) Nickel Skimmer Cone, Qty. 2 (WE021137) Nickel Sampler Cone, Qty. 2 (WE021140) Sampler Cone O-Ring, Qty. 5 (WE012687) Series II…
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
This one-piece quartz torch, marked blue, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Base Configuration's Sample Introduction Kit (N8150034).
-
Axial Flat Mirror Kit for Avio 200
PerkinElmerThe recommended axial flat mirror kit for use with the Avio 200 ICP-OES. Includes: mounted mirror with o-ring and one set of large nitrile gloves.
-
Ryton Scott Spray Chamber for Avio 200/500
PerkinElmerThe spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. It is corrosion resistant and is inert to most mineral acids, including hydrofluoric acid, aqua regia, and all…
-
This module kit includes: External Spray Chamber, Qty. 1 (N0791499) Inner Chamber for External Ryton/Type II Spray Chamber, Qty. 1 (N0582258) 2 mm I.D. Alumina Injector, Qty. 1 (N0791183) 1-Slot Quartz Torch, Qty. 1 (N0790131) End Cap Assembly for GemTip Cross-Flow Nebulizer, Qty. 1 (N0780546)…
-
The SeaSpray ™ concentric nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization ef ciency for trace level analyses. It offers freedom from clogging while nebulizing solutions to the limit of solubility of most mineral salts and conferring significant…
-
The UniFit connector is a convenient drain connector for glass cyclonic spray chambers.
-
This kit includes: Demountable Quartz Torch PVDF qty.2 (N8152379) 2.0 mm Demountable Quartz Injector qty.2 (N8152376) Torch Injector Nut qty.2 (N8152451) Glass Cyclonic High Sensitivity Spray Chamber with Matrix Gas Port qty.1 (N8152389) Threaded Spray Chamber Drain Line qty.2 (N8152456) …
-
EzyLok Kit for Glass Concentric Nebulizers
PerkinElmerIncludes: EzyLok Connector for 4mm Tubing EzyLok 6mm Hose Adaptor Nebulizer Hose Clip
-
This kit includes: 46 cm Copper Refrigeration Tube, Qty. 1 (W1038883) Brass Nut for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011094) Brass Back Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011095) Brass Front Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011096) Coil Forming…
-
Solution fitting, 0.5 mm PTFE with adapter F2-50
PerkinElmerSolution fitting, 0.5 mm PTFE with adapter F2-50
-
Copper Torch Ignitor Tape for Optima 8x00
PerkinElmerPart of the Cyclonic/Concentric Kit 8x00 which includes: 1 Slot Quartz Torch, 2.0 mm i.d. Alumina Injector, Glass Cyclonic Spray Chamber, Meinhard ® Type K1 Nebulizer, Quartz Torch Copper Ignitor Tape – Qty. 50 pcs.
-
Fused Silica Obstruction Removal Kit for ST type Nebulizers. Used to clear blockage from ST type nebulizers. Inc Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final…
-
This spray chamber adapter is used in the NexION 300 and 350 D/Q/S/X adjustable torch mount assembly (W1037485).
-
Nebulizer liquid fitting with ETFE capillary tubing - 4 length by 0. 020 ID x 0. 062 OD flanged onto female CTFE fitting Includes one male barb CTFE fitting.
-
2 mm gas line with UpChurch fingertight fittings for Mira Mist and Ari Mist nebulizers.
-
Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for…
-
This one-piece SilQ torch, marked white, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Semiconductor Configuration's Sample Intruduction Kit (N8150037).
-
PTFE Capillary Tubing
PerkinElmerPFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.
-
This kit includes: O-Ring 29.74 mm I.D., Qty. 1 (09902131) O-Ring 20.3 mm I.D., Qty. 2 (09902223) O-Ring 28.17 mm I.D., Qty. 1 (09921061) O-Ring 26.57 mm I.D., Qty. 1 (09921062) O-Ring 20.3 mm I.D., Qty. 1 (09902045)
-
Adjustable Torch Mount Assembly for Avio 200
PerkinElmerThe adjustable torch mount assembly is included in the Adjustable Torch Body Assembly (N0790138). This assembly includes: Torch Mount, Qty 1. (N0791285) Disk Magnet, Qty. 1 (09200515)
-
The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…
-
The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.