Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies comprehensive spares kit is suitable for use with Agilent ICP-MS systems fitted with x-lens. It does not include interface cones, so add G3690A# option for 7700x/e and 8000 series ICP-MS. Application: For Agilent ICP-MS Systems Fitted with X-Lens. Excludes Interface Cones,…

ICP peristaltic pump tubing is used together with an on-board peristaltic pump that controls the flow of solution into and waste out of the sample introduction system for ICP-MS. It can reduce the variation in uptake flow rate due to variation in physical properties of the solutions. Easy-fit peri…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions. Includes protective case. Requires four…

The Agilent Technologies vacuum pump fluid acts as a coolant in a Fomblin roughing pump and helps in the smooth lubrication of the pump. Application: For NexION. Suitable for PerkinElmer NexION ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For X-Lens of Agilent 7700X/E, 7800, 7850 & 8800 ICP-MS This product is only available to U.S. Domestic…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent ion lenses and SimulScan detectors are equivalent to the PerkinElmer ICP-MS versions and can be used with complete confidence. Application: For PerkinElmer NexION, PerkinElmer ICP-MS Instruments This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Ferrules and connectors are critical components to securing a leak-free flow path in your GC. Agilent is proud to offer a wide selection of supplies for your connection needs, including ferrules varying in size and material, unions, column connectors, and our patented self-tightening column nuts. …

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies hardware maintenance manual is suitable for use with Agilent 8800 series triple quadrupole ICP-MS. Application: For Agilent 8800 Series Triple Quadrupole ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For S-Lens of 8900 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies octopole reaction system cell entrance lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For ICP-MS, Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…