Thomas No. 1204B47 and 1204B48 Designed for homogenizing of multiple samples Open slotted tooth - ideal for soft to the toughest of tissue samples Long shaft - perfect for samples volumes within 1.5ml-50ml tubes No risk of cross contamination or need to clean a probe between…

For POLYTRON® PT 3100 D and PT 6100 D, for measuring the product temperature. Probe can be directly connected to the rear panelof the device. Temperature range is displayed on LCD display with a range of 0°C to 120°C If the temperature probe is used with the PC software, you…

Homogenize most samples in under 30 sec. For volumes from 100µl to 250ml Supplied with both 5mm and 7mm generator probes Benchmark’s new handheld homogenizer, the D1000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with…

Thick-walled aluminum chamber with Teflon rotor. Working volume is 15 ml. The chamber can be precooled and the superior heat capacity and large mass of the 1/2 inch thick aluminum walls will keep the sample cold. The SASC-15 can also be combined with the BeadBeater ice water jacket (the later comes…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 1ml

Square well sealing mat specifically designed for the 2205 96-Well Reinforced Titer Plate. Sold in package of 50.

Thomas No. 1204B70 Compact digital benchtop unit with 1305 high watt motor Can homogenize, emulsify, blend, and/or mix Ideal for processing volumes from 0.03ml to 30L*  Motorized PRO TRAC stand Made in USA and includes 2 Year Warranty The 115V PRO400D Digital…

CoolTeenPrep™ 6 X 15 mL Adapter is a cryogenic adapter which allows simultaneous lysis of 6 x 15 mL samples. Based on passive temperature control technology, the CoolTeenPrep™ adapter ensures an efficient cooling of the samples as dry-ice, placed into the moving tray, is in direct…

Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a…

Cryolys Evolution is the high-end cooling system specially developed for Precellys Evolution. Its innovative patented technology allows a very efficient cooling of the grinding area using dry ice and ambient air. Thanks to the exclusive software extension for Precellys Evolution, the temperature is…

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

The Samix machine is used to efficiently mix creams, ointments and semi-solids. It allows to incorporate and mix all necessary ingredients, in their specific measurements, in the jar saving lots of processing time. The U1000 can be used to mix preparations in the 15 – 1000 mL jars. …

Tissue grinders are designed to gently homogenize fresh, soft tissue in an excess of an appropriate solvent. Most tissue grinders are made of glass or plastic. This all stainless-steel mortar and pestle (Potter-Elvehjem style) tissue grinder provides superior temperature control and greater plunger…

The BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The…

High-throughput adapter for the FastPrep-96 that holds 96 x 2 mL Lysing Matrix Tubes. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during homogenization. Ideally suited for DNA and RNA isolation. Enzyme isolation and protein…

The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large…

Thomas No. 1204B76 Multi-Gen Adapter for Multi-Gen 7 & 7XL generator probes (Required for PRO Homogenizer Unit & Multi-Gen generator probe use) Thomas No. 1204B77 Multi-Gen 7XL 12-pack designed for homogenizing of multiple samples Advantages over plastic…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations: - Automated Ultrasonic Homogenizing System - Automated Mechanical Homogenizing System - Automated Mechanical and Ultrasonic Homogenizing System This advanced…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The Samix machine is used to efficiently mix creams, ointments and semi-solids. It allows to incorporate and mix all necessary ingredients, in their specific measurements, in the jar saving lots of processing time. The ES500 can be used to mix preparations in the 15 – 500 mL…

Automated multi-sample homogenizing Compact design, occupies small footprint Process up to 6 samples at the same time Store up to 10 different programs Easy load tube racks, 5ml-50ml tubes* Can perform 60 oscillations per minute Automated engagement & disengagement Avoiding…

This versatile Sonifier® is perfect for all but the highest-volume applications, providing up to 250 watts of output power at 20 kHz. Like all Sonifiers in the SFX Series, the SFX250 offers the industry’s simplest user interface and the most precise control over all the critical…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

PRO Scientific CBD Homogenizing packages are perfect for homogenizing of various cannabis solutions and oils. High shear homogenization of sample physically breaks down your particle size creating a uniform, homogenous solution.  This is vital for ensuring consistent dosing and potency as…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Compact digital unit with high watt motor 0.05ml - 3.5 L volume range and viscosity up to 50,000 mPas Bright LED display and user-friendly controls Can homogenize, emulsify, blend and/or mix Includes U-shape post mounted stand assembly Made in the USA with a 2-year warranty …

Mixer designed for reliability and durability. Ideal for light-duty mixing of water-like fluids  Brushed DC motor with integrated overload protection  Durable—no wear parts that require user service  IP44 rated per IEC 60529  User-replaceable keyless chuck.

The Mini-BeadBeater-24 disrupts microbial cells and plant and animal tissue by violently agitating four to twenty-four 2 ml screw-cap microvials containing small glass, ceramic or steel beads and 0.1 to 1 ml disruption buffer. Even resistant samples like yeast, spores or fibrous tissue are…

The BeadBlaster™ 96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas, including biological research, environmental testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a…