Supplied in bulk or in 2.0mL tubes-prefilled with beads Compatible with all common bead homogenizers Available in glass, ceramic or stainless steel Unique Triple-Pure™ grade: Acid washed, heat treated and tested free of nuclease Bead beating is quickly becoming the preferred…

The BioPulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Because of the high water content, most fresh tissue becomes as brittle as glass at liquid nitrogen temperatures. A sharp blow with a hammer will shatter it into tiny pieces. Called freeze-fracturing or…

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.

The Precellys 24 tissue homogenizer can homogenize/grind many different sample types in 30 seconds. It possesses a unique automatic tube locking system, a real push-and-play system that makes the Precellys 24 the easiest homogenizer to handle. The Precellys 24 is used by thousands scientists over…

Powerful stand-disperser (Ecoline), flexibile-use disperser PT 10-35 GT features high drive power and a sleek design. With its large reserve capacity, it can be used for sample with large volumes as easily as preparing samples with smal volumes. BENEFITS Ergonomics Easy…

The BeadBlaster™ 96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas, including biological research, environmental testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a…

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Designed for low-volume applications, the SFX150 Sonifier® delivers up to 150 watts of power at 40 kHz for quiet operation. It’s the only cell disruptor and homogenizer of its type that includes a handheld converter designed for ergonomic comfort and easy control to simplify and speed…

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

Stainless steel beads have a density of 7.9g/cc. They are used mostly for grinding leaves and seeds. They are made of Type 316 stainless steel - the most corrosion resistant available.

The solid aluminum vial rack holds forty-eight 2ml vials. It is an important accessory for the MiniBeadbeater-96 bead mill. When temperature control of samples is a concern, the aluminum vial rack will keep the sample temperature at the desired temperature during the beadbeating process.

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

Chrome steel has a density of 7.9g/cc (used mostly for grinding leaves). Beads are sold in one pound bottles.

Cooling system to protect heat sensitive samples during homogenization The BR-Cryo Cooling Unit is compatible with the Bead Ruptor 24 and is designed to prevent the increase of sample temperature during the homogenization process. Friction generated through the bead milling process generates…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations: - Automated Ultrasonic Homogenizing System - Automated Mechanical Homogenizing System - Automated Mechanical and Ultrasonic Homogenizing System This advanced…

Homogenizer drives are used as a source of motor for dis-aggregating tissue samples into individual cells. The drive motor can be set to a special rpm depending on the type of cell being used. The drives are typically bolted to an upright stand for support during the operation. Our stand is for…

/2 Design: universal geometry of two rows of teeth, suitable for a large spectrum of laboratory applications when emulsifying, suspending, dispersing, or extracting samples. W Design:  Used for fibrious, stringy or solid samples.     Z Design:  Used for…

The Pulse 150 Ultrasonic Homogenizer uses cavitation and ultrasonic waves to break cells in suspension, shear DNA and prepare samples for ChIP assays. With up to 150 watts of power, the unit processes samples from 0.1 ml to 150 ml (with the appropriate horn).   All components…

Thick-walled aluminum chamber with Teflon rotor. Working volume is 15 ml. The chamber can be precooled and the superior heat capacity and large mass of the 1/2 inch thick aluminum walls will keep the sample cold. The SASC-15 can also be combined with the BeadBeater ice water jacket (the later comes…

Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 1ml

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

Variable speed mixer designed for reliability and durability. Four-digit LED display indicates rpm, torque, time, and rotation direction  Durable—no wear user serviceable parts  Low/no maintenance brushless motor  Adjustable tilt from 0 to 30 degrees allows proper propeller…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 50ml

Economically priced with maximum flexibility The economically priced Tissue Master 125 is well suited for customers who homogenize with little variation in sample size. The Omni Tissue Master Package includes three stainless steel generator probes that can handle a wide variety of sample…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

Mfr. No. PK-01200S and PK-02200S Ideal for micro-homogenizing in following tubes; 500ul, 1.5ml, and 2ml micro-tubes Volumes as small as 0.05ml can be easily homogenized in a matter of seconds 5mm flat-bottom generator probe designed for liquid and soft samples Ideal for…

Stainless Steel and Steel Chamber Assemblies For use with 3410B54 Macro ES, 3410B05 Mixer, and 3410B10 Macro Power Series Homogenizers Available in blade or generator probe style Aerosol contained safety sealed systems meet both NIH and CDC guidelines for aerosol containment (Spec…