Small and powerful hand-held homogenizer unit For processing within various tube sizes to small beakers Made in USA and includes 2 Year Warranty High-torque motor with a variable speed adjustment, 5000 to 35000 rpm Use hand-held or post mount to a stand Offering plenty of power…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 5ml

Speed control from 10,000 to 29,000rpm Interchangeable shafts, rotors & stators 6 position control dial Autoclavable stainless steel shafts 2 year manufacturer warranty The Scilogex D500 Homogenizer has a maximum speed of 29,000rpm and reduces processing time significantly. The smooth…

Feature Highlights: High speed powerful motor homogenizer Ideal for microbues or other container with sample size of 0.5-250ml Light weight and portable Autoclavable stainless steel probes Ideal for tissue of animal, bacteria, yeast, plant samples, etc.

Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a…

Stainless steel beads have a density of 7.9g/cc. They are used mostly for grinding leaves and seeds. They are made of Type 316 stainless steel - the most corrosion resistant available.

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 50ml

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

Thomas Nos. 1203C35 and 1203C35 The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of…

The Omni Bead Ruptor 4 is the newest addition to the Omni line of Bead Ruptor bead mill homogenizers. Built upon the innovative design and unsurpassed quality of Omni's Bead Ruptor family, the Bead Ruptor 4 provides powerful performance in a compact design. Using disposable sample tubes…

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

Powerful stand-disperser (Ecoline), flexibile-use disperser PT 10-35 GT features high drive power and a sleek design. With its large reserve capacity, it can be used for sample with large volumes as easily as preparing samples with smal volumes. BENEFITS Ergonomics Easy…

24 x 2 mL All-Metal QuickPrep™ Sample Holder is the strongest FastPrep adapter used for lysing highly contagious samples and samples suspected of harboring prions. Due to its ability for high temperature sterilization, this adapter is the safest solution for CNS tissue lysis and other…

The Omni Tips’ patented design eliminates the hassle of disassembly and maintenance of traditional stainless steel generators. Proprietary Omni Tip™ probes are engineered from durable plastics, are reusable, autoclavable and or are economical enough to be disposed of after each use…

Replacement parts, one bowl

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 15ml

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

The Cryo-Cup Grinder consists of a stainless steel, semicircular bowl (or mortar) imbedded in a double walled, insulating cup. Up to 5 grams of hard frozen tissue is placed in the mortar precooled to liq N2 temperature. Using the special hand-held pestle made of non-heat conducting plastic, the…

Acid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.

A compact, low cost screw-press designed to pulverize 50-500mg of hard, brittle material such as bone or teeth. If fresh tissue is used, the sample is cooled in liquid nitrogen to make the tissue hard and brittle, inserted into in the pre-cooled pulverizer 'nut' and then crushed by manually…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Stand-disperser (High-End Line), flexible-use disperser with power cable, PC software, RS-232 / USB connection cable Applications with the highest demands for reproducibility and scaling up can be efficiently performed with this device. The fully digitized control and regulation…

Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…

Our most powerful Sonifier®, the SFX550 easily handles high-volume applications with up to 550 watts of output power at 20 kHz. The SFX550 can process larger, viscous samples, but also provides precise control over energy output and other parameters to accommodate experiments of all sizes. All…

Replacement teflon o-ring used in the cap of a SS Lysing Matrix tube to provide a leak-proof closure.

Deep-well reinforced titer plate with a 96-well format. Each square well has a volume of 1.4 mL and a working volume of 1.0 mL. Compatible with our 2010 Geno/Grinder due to the toughened wells that withstand bead beating. This plate can also be used with the 1600 MiniG.

Medium-size adapter that holds 12 x 15 mL Lysing Matrix tubes. It allows frozen samples in Lysing Matrix tubes loaded in the adapter and stored at -20°C or -80°C are ready to be immediately processed with minimal hands-on manipulation, preventing degradation of cellular components by…

/2 Design: universal geometry of two rows of teeth, suitable for a large spectrum of laboratory applications when emulsifying, suspending, dispersing, or extracting samples. /4 Design: geometry with two rows of teeth for more shear allowing for finer extractions, emulsions and suspensions. …

Medium-scale adapter for the FastPrep-96 that holds 20 x 15 mL Lysing Matrix Tubes. Ideally suited for DNA and RNA isolation. Enzyme isolation and protein production. Isolation of natural products. Food preparation for quality analysis. Biopharma manufacturing. Forensic applications. …

Hollow glass pestle allows addition of ice water for chilling samples during homogenization. All glass construction primarily for manual operation. Interior of the pestle is hollow allowing to reduce heat generated in the grinding process. It can be used with a laboratory stirrer at low speed if a…