Bead Tissue & Cell Homogenizers

Homogenizers are incredibly powerful laboratory instruments used to break down, mix, and blend substances into a consistent solution. Ideal for applications that emulsify, disperse, and reduce particle sizes in liquids of semi-solid samples.
Options include bead homogenizers, glass homogenizers, and high-speed homogenizers suitable for a range of lab purposes and requirements.
Bead blasters also carry a range of speeds and power suitable for a range of requirements, high-speed homogenizers are perfect for sample preparation, chemical processing, and nanoparticle synthesis.
All hemomgenizers carry safety features such as sample protection and emergency stop buttons to ensure of a safe laboratory operation for the operator.

Compare Tool

Select up to 3 products

HomeAll Products

Homogenizers

1 - 32 of 190
Sort
View
Show
  • ULTRA-TURRAX® Tube Drive consists of 2 x ST-20, 2 x DT-20 incl. 1 removal hook for removal the rotor-stator unit, 2 x BMT-20 G / S, power supply. Unique and universal dispersing, stirring, homogenizing and grinding system with hermetically sealable disposable sample tubes. Protection and…

  • The Omni TH is a powerful Tissue Homogenizer designed to handle a wide range of laboratory samples from 0.2 mL to 100 mL in volume. The TH tissue homogenizer can usually process a tissue sample in less than 30 seconds and is compatible with a wide variety of generator probes for flexibility in…

  • The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large…

  • The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

  • The CG-Series Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This…

  • 2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

  • The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 3ml

  • Smooth rotation and repeatability Totally enclosed motors Variable speed motor drives are designed to make the homogenizing process faster, safer and more thorough. These variable-speed drives feature totally enclosed motors. For high-speed operations, the direct drive shaft is…

  • Biospec

    Tissue grinders are designed to gently homogenize fresh, soft tissue in an excess of an appropriate solvent. Most tissue grinders are made of glass or plastic. This all stainless-steel mortar and pestle (Potter-Elvehjem style) tissue grinder provides superior temperature control and greater plunger…

  • The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 1ml

  • Small volume blender chambers with stainless steel blades suitable for smaller volumes.

  • High-throughput adapter for the FastPrep-96 that holds 96 x 2 mL Lysing Matrix Tubes. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during homogenization. Ideally suited for DNA and RNA isolation. Enzyme isolation and protein…

  • Stainless Steel and Steel Chamber Assemblies For use with 3410B54 Macro ES, 3410B05 Mixer, and 3410B10 Macro Power Series Homogenizers Available in blade or generator probe style Aerosol contained safety sealed systems meet both NIH and CDC guidelines for aerosol containment (Spec…

  • This versatile Sonifier® is perfect for all but the highest-volume applications, providing up to 250 watts of output power at 20 kHz. Like all Sonifiers in the SFX Series, the SFX250 offers the industry’s simplest user interface and the most precise control over all the critical…

  • Bertin Corp

    The Precellys 24 tissue homogenizer can homogenize/grind many different sample types in 30 seconds. It possesses a unique automatic tube locking system, a real push-and-play system that makes the Precellys 24 the easiest homogenizer to handle. The Precellys 24 is used by thousands scientists over…

  • The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is…

  • Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…

  • The Omni Micro Homogenizer is a hand-held battery powered rotor-stator homogenizer designed for use inside or outside of a laboratory setting. The Micro homogenizer is powered by a 12 volt lithium ion battery that provides operating speeds from 5,000 to 30,000 rpm for rapid homogenization of…

  • quick-ship

    Biospec

    Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable…

  • Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

  • Flexible and reproducible homogenization for various starting materials Efficient sample cooling during the whole preparation Broad portfolio of optional innuSPEED nucleic acid extraction kits and lysis tubes The SpeedMill PLUS is an efficient homogenization system for use with a…

  • The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

  • The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

  • Scientific Industries

    Bead Genie™ Vertical Microtube holder holds 12 microtubes, (1.5ml or 2.0ml tubes), using all snap caps or all screw caps style. Requires the clamping disk supplied with Bead Genie™. Bead Genie™ Vertical 6 x 15mL Tube Holder holds up to 3 50ml tubes.…

  • Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.

  • Thomas No. 1204B62 Most versatile hand-held homogenizer unit Ideal for processing volumes from 0.03ml to 5L High-torque motor with a variable speed adjustment, 10000 to 30000 rpm Use hand-held or post mount to a stand The 115V PRO250 homogenizer unit is a perfect fit…

  • 5mm diameter steel beads are suitable for homogenization of tough, hard samples, plant materials, seeds and dried samples. Beads are alcohol washed and heat treated to remove contaminants and render them nuclease and protease free. Can be used with any bead homogenizer. 1000 beads…

  • Our most powerful Sonifier®, the SFX550 easily handles high-volume applications with up to 550 watts of output power at 20 kHz. The SFX550 can process larger, viscous samples, but also provides precise control over energy output and other parameters to accommodate experiments of all sizes. All…

  • Biospec

    The BioPulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Because of the high water content, most fresh tissue becomes as brittle as glass at liquid nitrogen temperatures. A sharp blow with a hammer will shatter it into tiny pieces. Called freeze-fracturing or…

  • The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 15ml

  • The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 50ml

  • Biospec

    The BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe. The powerful 10,000 rpm motor is totally sealed and can be hand-held or…

Compare Tool

Select up to 3 products