The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is…

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Fast, efficient homogenization in about 35 seconds For all sample types, from soft tissue to bone Mix up to 24 tubes simultaneously Sealed 2.0ml tubes - eliminates cross contamination The BeadBlaster™ 24 completely lyses, grinds and homogenizes a broad variety of biological…

Homogenizer stand

Variable speed mixer designed for reliability and durability. Durable—no wear user serviceable parts  Low/no maintanence brushless motor  Adjustable tilt from 0 to 30 degrees allows proper propeller placement  IP44 rated per IEC 60529  Hollow through shaft and…

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements. ST…

The Precellys Evolution is the most efficient and flexible bead beating tissue homogenizer on the market. Thanks to its powerful 3D precession movement associated to a high energy motor (up to 10 000rpm) and an exclusive tube locking system, the Precellys Evolution can homogenize any sample from…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time. The Mini-BeadBeater-16 disrupts microbial cells and plant and animal tissue by violently agitating four to sixteen 2 ml screw-cap microvials containing small glass, ceramic or steel beads…

The Samix machine is used to efficiently mix creams, ointments and semi-solids. It allows to incorporate and mix all necessary ingredients, in their specific measurements, in the jar saving lots of processing time. The ES500 can be used to mix preparations in the 15 – 500 mL…

Small and powerful hand-held homogenizer unit For processing within various tube sizes to small beakers Made in USA and includes 2 Year Warranty High-torque motor with a variable speed adjustment, 5000 to 35000 rpm Use hand-held or post mount to a stand Offering plenty of power…

Automated multi-sample homogenizing Compact design, occupies small footprint Process up to 6 samples at the same time Store up to 10 different programs Easy load tube racks, 5ml-50ml tubes* Can perform 60 oscillations per minute Automated engagement & disengagement Avoiding…

Lyses, grinds and homogenizes a wide range of samples Process up to 24 samples simultaneously Powerful refrigeration system protects heat sensitive samples Full range of beads available The Benchmark BeadBlaster 24R is a high capacity, refrigerated bead homogenizer that meets a…

The FastPrep-24 Classic instrument is a high-speed benchtop homogenizer offering the ultimate in speed and performance for the lysis of biological samples. Simultaneous homogenization of up to 24 samples takes place within 40 seconds. * Thorough and quick lysis of any tissues and cells *9…

Double decker adapter that holds 48 x 2 mL Lysing Matrix tubes. The ergonomic design of the adapter ensures easy loading of Lysing Matrix tubes that remain securely sealed during homogenization. It stands stable on the bench top and is commonly used as a tube rack. Ideally suited for…

The Mini-Beadbeater-96 is high-energy, high-throughput cell disrupter. In a single 1-3 minute batch run it handles up to 192 samples using a deep-well microplate format or 45 samples in 1.5 or 2 ml screw-cap microvials. In a busy day thousands of samples can be processed. The MiniBeadbeater-96…

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

ULTRA-TURRAX® Tube Drive consists of 2 x ST-20, 2 x DT-20 incl. 1 removal hook for removal the rotor-stator unit, 2 x BMT-20 G / S, power supply. Unique and universal dispersing, stirring, homogenizing and grinding system with hermetically sealable disposable sample tubes. Protection and…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

The Omni TH is a powerful Tissue Homogenizer designed to handle a wide range of laboratory samples from 0.2 mL to 100 mL in volume. The TH tissue homogenizer can usually process a tissue sample in less than 30 seconds and is compatible with a wide variety of generator probes for flexibility in…

The conical tissue homogenizer is designed for use with homogenizing motors. Ideal for tissues such as muscle, heart and lung. The conical tissue homogenizer has a large area for most efficient grinding. The clearance between pestles is .004-.006?. Capacity: 3ml

The BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe. The powerful 10,000 rpm motor is totally sealed and can be hand-held or…

The Mini-BeadBeater-24 disrupts microbial cells and plant and animal tissue by violently agitating four to twenty-four 2 ml screw-cap microvials containing small glass, ceramic or steel beads and 0.1 to 1 ml disruption buffer. Even resistant samples like yeast, spores or fibrous tissue are…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

The MicroMincer is a compact, hand-operated screw press which macerates 0.3 grams or less of soft fresh plant or animal tissue (e.g. muscle, liver, brain, epicotyl and pulpy leaf tissue) without sample loss, heat generation, foaming or aerosol problems. Much of the sample, without added buffer, is…

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…