Primary Nav Button
GO

  • PRODUCT AVAILABILITY: Did you know you can view a product's availability right on the product page? Simply enter the quantity you want to purchase and the current availability will appear below the item.

IKA Works

Dispersing Elements for T 25 Digital

Not yet rated

Dispersing Elements for T 25 Digital

Additional Views

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.

ST tools are recommended for use with tissue and other fibrous materials.

  • Saw tooth design creates a cutting and tearing action for shredding fibrous materials
  • Made of high quality stainless steel

 

Thomas No.3410M91
Volume range min. (H2O)0.001 l
Volume range max. (H2O)0.050 l
Stator diameter8 mm
Rotor diameter6.1 mm
Gap between rotor and stator0.25 mm
Circumferential speed max.7.7 m/s
Immersion depth min.27 mm
Immersion depth max.85 mm
Shaft length108 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

Thomas No.3410M97
Volume range min. (H2O)0.001 l
Volume range max. (H2O)0.1 l
Stator diameter10 mm
Rotor diameter7.5 mm
Gap between rotor and stator0.35 mm
Circumferential speed max.9.4 m/s
Immersion depth min.22 mm
Immersion depth max.85 mm
Shaft length105 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.3410N00
Volume range min. (H2O)0.010 l
Volume range max. (H2O)1.5 l
Stator diameter18 mm
Rotor diameter12.7 mm
Gap between rotor and stator0.3 mm
allowable Speed max.24000 rpm
Circumferential speed max.15.9 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.3410N09
Volume range min. (H2O)0.05 l
Volume range max. (H2O)2 l
Stator diameter25 mm
Rotor diameter17 mm
Gap between rotor and stator0.5 mm
Circumferential speed max.21.4 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.15 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.3410N12
Volume range min. (H2O)0.1 l
Volume range max. (H2O)2 l
Stator diameter25 mm
Rotor diameter18 mm
Gap between rotor and stator0.5 mm
Circumferential speed max.22.6 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.5 µm
Ultimate fineness, suspensions max.25 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.5 µm

 

 

Thomas No.1203C39
Volume range min. (H2O)0.1 l
Volume range max. (H2O)1.5 l
Stator diameter18 mm
Rotor diameter12.7 mm
Gap between rotor and stator0.3 mm
Circumferential speed max.15.9 m/s
Immersion depth min.40 mm
Immersion depth max.225 mm
Shaft length270 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesno
Working temperature max.220 °C
Sterilization methodsall methods
Vacuum1 mbar
Pressure max.6 bar
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C40
Volume range min. (H2O)0.05 l
Volume range max. (H2O)2 l
Stator diameter25 mm
Rotor diameter17 mm
Gap between rotor and stator0.5 mm
Circumferential speed max.21.4 m/s
Immersion depth min.40 mm
Immersion depth max.225 mm
Shaft length270 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesno
Working temperature max.220 °C
Sterilization methodsall methods
Vacuum1 mbar
Pressure max.6 bar
Ultimate fineness, suspensions min.15 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C41
Volume range min. (H2O)0.1 l
Volume range max. (H2O)2 l
Stator diameter25 mm
Rotor diameter18 mm
Gap between rotor and stator0.5 mm
Circumferential speed max.22.6 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.5 µm
Ultimate fineness, suspensions max.25 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.5 µm

 

 

Thomas No.1203C42
Volume range min. (H2O)0.001 l
Volume range max. (H2O)0.05 l
Stator diameter8 mm
Rotor diameter6.1 mm
Gap between rotor and stator0.25 mm
allowable Speed max.25000 rpm
Circumferential speed max.8.0 m/s
Immersion depth min.27 mm
Immersion depth max.85 mm
Shaft length108 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C43
Volume range min. (H2O)0.001 l
Volume range max. (H2O)0.01 l
Stator diameter10 mm
Rotor diameter7.5 mm
Gap between rotor and stator0.35 mm
allowable Speed max.25000 rpm
Circumferential speed max.9.8 m/s
Immersion depth min.22 mm
Immersion depth max.85 mm
Shaft length105 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C44
Volume range min. (H2O)0.01 l
Volume range max. (H2O)1.5 l
Stator diameter18 mm
Rotor diameter13.4 mm
Gap between rotor and stator0.25 mm
allowable Speed max.25000 rpm
Circumferential speed max.17.5 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.10 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C45
Volume range min. (H2O)0.05 l
Volume range max. (H2O)2 l
Stator diameter25 mm
Rotor diameter20 mm
Gap between rotor and stator0.5 mm
allowable Speed max.25000 rpm
Circumferential speed max.26.2 m/s
Immersion depth min.40 mm
Immersion depth max.165 mm
Shaft length194 mm
Material in contact with mediumPTFE, AISI 316L
pH min.2
pH max.13
Suitable for solventsyes
Suitable for abrasive substancesyes
Working temperature max.180 °C
Sterilization methodsall methods
Ultimate fineness, suspensions min.15 µm
Ultimate fineness, suspensions max.50 µm
Ultimate fineness, emulsions min.1 µm
Ultimate fineness, emulsions max.10 µm

 

 

Thomas No.1203C46
incl. 1 Disposable tube
Plastic materials used approved by FDA.
Volume range min. (H2O)0.01 l
Volume range max. (H2O)0.1 l
Stator diameter10 mm
Rotor diameter6.75 mm
Circumferential speed max.8.5 m/s
Immersion depth min.15 mm
Immersion depth max.85 mm
Shaft length150 mm
Material in contact with mediumPolycarbonat (PC), Polyetheretherketon (PEEK)
Working temperature max.100 °C
Sterilization methodsautoclavable

 

 

Thomas No.1203C47
incl. 1 Disposable tube
Plastic materials used approved by FDA.
Volume range min. (H2O)0.01 l
Volume range max. (H2O)0.5 l
Stator diameter14 mm
Rotor diameter9.5 mm
Circumferential speed max.12 m/s
Immersion depth min.15 mm
Immersion depth max.85 mm
Shaft length150 mm
Material in contact with mediumPolycarbonat (PC), Polyetheretherketon (PEEK)
Working temperature max.100 °C
Sterilization methodsautoclavable

 

Please Enter Your Order Info

Filter by:

  • Clear Filters
Product Detail
Thomas No.
3410M91
Mfr. No.
1024200
Description
S 25 N - 8 G Dispersing element
list price/quantitytotal
$0.00
Thomas No.
3410N00
Mfr. No.
0593400
Description
S 25 N - 18 G Dispersing element
list price/quantitytotal
$0.00
Thomas No.
3410N09
Mfr. No.
1713300
Description
S 25 N - 25 G Dispersing element
list price/quantitytotal
$0.00
Thomas No.
3410N12
Mfr. No.
1713800
Description
S 25 N - 25 F Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C39
Mfr. No.
2348000
Description
S 25 KV - 18 Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C40
Mfr. No.
2466900
Description
S 25 KV - 25 G Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C41
Mfr. No.
2404000
Description
S 25 KV - 25 F Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C42
Mfr. No.
4446900
Description
S 25 N - 8 G ST Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C43
Mfr. No.
4447100
Description
S 25N - 10 G ST Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C44
Mfr. No.
4447300
Description
S 25 N - 18 G ST Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C45
Mfr. No.
4447500
Description
S 25 N - 25 G ST Dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C46
Mfr. No.
3452200
Description
S 25 D - 10 G - KS Plastic dispersing element
list price/quantitytotal
$0.00
Thomas No.
1203C47
Mfr. No.
3452100
Description
S 25 D - 14 G - KS Plastic dispersing element
list price/quantitytotal
$0.00
$0.00 (0 Items)

May we suggest

Write A Review

Submit Review
Cancel
Back To Top

About

Resources

Support

Shopping Tools

ISO 9001:2015 Certified Company

©Thomas Scientific 2024 All Rights Reserved. Terms & Conditions