Grinders

Compare Tool

Select up to 3 products

1 - 32 of 77
Sort
View
Show
  • Thomas Pestle Tissue Grinder Assemblies with Serrated Pestles

    Thomas®

    Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

  • Dounce Tissue Grinder With Glass Pestle

    DWK Life Sciences (Kimble)

    Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction Two pestles are supplied with each unit: a large, clearance pestle for the initial sample reduction and a small, clearance pestle to form the…

  • PYREX® Potter-Elvehjem Tissue Grinders

    Corning

    These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…

  • Thomas Pestle Tissue Grinder Assemblies with Smooth Pestles

    Thomas®

    Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

  • Cyclone Sample Mill

    UDY

    Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

  • Ultra Centrifugal Mill ZM 200

    Retsch

    Speed range of 6,000 to 18,000 rpm Gentle, rapid size reduction via 2-step process High throughput Quiet, reliable, easy-to-clean The ZM 200 Ultra-Centrifugal Grinding Mill rapidly reduces soft to medium-hard and fibrous materials to analytical sample size. Grinding takes…

  • Potter-Elvehjem-Type Tissue Grinders with PTFE Pestles

    DWK Life Sciences (Wheaton)

    Wheaton 33 low extractable borosilicate glass Precisely constructed with completely interchangeable parts Especially for use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue Grinding chamber clearance is 0.1 - 0.15 mm Unit can be autoclaved …

  • 1mL Tissue Grinder, Dounce Type

    Ace Glass

    The Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.

  • Micro-Mill® Grinders

    Bel-Art - SP Scienceware

    For rapid, high-speed grinding of small samples from 20 to 50ml. Stainless steel or hard-faced blade rotates at speeds up to 12,000 rpm to successfully grind bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue, glass, grain, kaolinites, leaves,…

  • Disposable Polypropylene, RNase-Free Pellet Pestles

    DWK Life Sciences (Kimble)

    Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

  • Stand Assembly for Ultra EZgrind™ Tissue Homogenizer

    Ultra EZgrind™

    Stand Assembly for Ultra EZgrind™ Tissue Homogenizer

  • Duall Tissue Grinder With Glass Pestle

    DWK Life Sciences (Kimble)

    Combines both conical and cylindrical surfaces to effectively reduce tissue and produce a uniform homogenate Ideal for connective tissue, such as muscle, heart and lung Clearance between pestles and tubes is 0.004 to 0.006 inches* Pestle can be motor driven (see Thomas number…

  • Grinding Units

    For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…

  • Mortar Grinders

    Retsch

    Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…

  • Riffle-Type Sample Splitters with Removable Hopper

    Humboldt

    Humboldt, Riffle-type sample splitter with removable hopper can be used to divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material…

  • Ten Broeck-Type Tissue Grinders

    DWK Life Sciences (Wheaton)

    Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

  • Disposable Tissue Grinders

    Biomedical Polymers

    Gamma Sterilized Closed system can grind specimen in sealed container to prevent contact with sample Molded in abrasive surface does not leave sediment System comes fully assembled and Gamma sterilized Available in three models Tissue grinding system is designed with safety and…

  • Tissue Press

    Biospec

    Simple operation Large capacity Threaded piston minces 10 to 50 grams of non-fibrous tissue. As the piston crank is turned, tissue is extruded through a sieve screen at the bottom. Clean up is simple with non-abrasive detergent and water. Includes three sieve screens with pore diameters…

  • A 11 basic Analytical Mills

    IKA Works

    Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a…

  • 1 ml Tissue Grinder, Tapered, Gnd

    DWK Life Sciences (Wheaton)

    These tapered tissue grinders have an improved design, which incorporates a longer tapered surface on both the mortar and pestle. The conical surface allows initial size reduction followed by passage through the cylindrical section for the final homogenization step. Grinding efficiency is improved,…

  • Ultra Ezgrind 5mm probe

    Ultra EZgrind™

  • ZM100 Centrifugal Grinding Mill

    Retsch

    High Shear Mill pulverizes chemicals, pigments, wood, bones, paper and more Easy access for sample recovery and cleaning Microswitch prevents operation while lid is open Powerful dual speed motor, 14,000/18,000 rpm 60 minute timer, speed selector switch and amperage…

  • Cell dissociation sieve - tissue grinder kit tissue grinder homogenizer kit,…

    MilliporeSigma

    Components Tissue Grinder Homogenizer Kit Components include: Kit contains one 85 mL cup, 5 each of 40, 50 and 60 mesh screens, 5 screen replacement keys and 2 glass pestles.

  • Reusable Stainless Pellet Pestles

    DWK Life Sciences (Kimble)

    Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.

  • Micro Grinder

    Glas-Col

    No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

  • A 10 basic Analytical Mills

    IKA Works

    The redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…

  • Generator Tube, 5mm for homogenizer

    Denville

    Generator Tube, 5mm for homogenizer

  • Micro-Sized, 0.2 mL Tissue Grinder

    DWK Life Sciences (Wheaton)

    Borosilicate Glass Finely ground pestle and tube Teflon® spacer aligns pestle and reduces aerosoling of product Matched sets

  • Grinding Unit Replacements and Accessories

    Thomas number 3371J15 is included with motor-driven grinder Thomas numbers 3371J25 and J30 are replacement feeds for 3371J15 and J20 grinding units Thomas number 3371J35 grinding plates can be used in both the hand and motor-driven grinders

  • Concrete Cylinder Molds

    Gilson Co. Inc.

    Biodegradable Plastic Cylinder Molds for single-use applications are non-absorptive and molded as single piece units for dimensional uniformity. Rugged molds have unlimited shelf life and are weather-resistant, but contain a unique additive that allows microbes present in landfills and composting…

  • Micro-Mill® II Grinder

    Bel-Art - SP Scienceware

    The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…

  • Dura-Grind Dounce-Type, Stainless Steel Tissue Grinders

    DWK Life Sciences (Wheaton)

    Stainless steel pestle with plastic knob at top, requires less effort than glass-tissue grinders Autoclavable Self-standing - mortar has flat bottom Single pestle and mortar supplied as a matched set 7, 15 and 40 mL

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.