Kemtech America Glass Joints & Adapters
-
Synthware Vacuum Take-Off Adapters
Kemtech AmericaSynthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size.
-
Synthware Inlet Adapters
Kemtech AmericaSynthware inlet adapter with a standard taper inner joint. Design allows introduction of reactants below the surface. The serrated hose connections have an O.D. of 10 mm.
-
SYNTHWARE Y-Shaped Connecting Tubes
Kemtech AmericaConnecting Tube, Y-shaped, Synthware, Tubing OD: 8mm.
-
Synthware Rotary Evaporator Anti-Splash Traps
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Inlet/Thermometer Adapter
Kemtech AmericaThermometer Adapter, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
Synthware Straight Drying Tubes
Kemtech AmericaSynthware straight drying tube. With top outer and lower inner standard taper joints of the same size.
-
SYNTHWARE Glass Check Valves
Kemtech AmericaCheck Valve, All Glass, Synthware, Hose Connections OD: 8mm, with ground seat for liquid seal.
-
Peptide Synthesis Vessel, Solid Phase, Synthware, Capacity: 10-100mL available, Frit Porosity: Coarse or Medium available, Frit Diameter: 15-40mm Available, GL Thread: 14 or 25, Arm OD: 8mm, Supplied with a PTFE lined cap and T-bore PTFE stopcock with 2mm bore.
-
Mineral Oil Bubbler Oil Adapters
Kemtech AmericaSynthware adapter with oil bubbler. With standard taper inner joint. Horizontal design allows for in line connection for apparatus purging.
-
SYNTHWARE Hickman Still Head, with Side Port
Kemtech AmericaHickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Vacuum Transfer Adapters
Kemtech AmericaSynthware vacuum transfer adapter with PTFE stopcocks and standard taper inner joint. Used for the transfer of sensitive and hazardous solutions while under vacuum.
-
Synthware Distillation Adapters, 75°
Kemtech AmericaSynthware distillation adapter bent at 75 degrees. Both ends are standard taper inner joints and are the same size.
-
Synthware Vacuum Take-Off Adapters with PTFE Stopcocks
Kemtech AmericaSynthware vacuum adapter with 2mm straight bore PTFE stopcock on the hose connection.The upper outer and lower inner standard taper joints are the same size.
-
SYNTHWARE Sublimators
Kemtech AmericaSublimator, Two Piece, Synthware, Various sizes are available. O-Ring Size: 217, 226, or 229, Clamp Size: 35, 65, or 75 available.
-
SYNTHWARE Jacketed Micro Vigreux Distillation Head
Kemtech AmericaDistillation Head, Vigreux, Jacketed Thermometer Joint: 10/18 Joints: 14/20, use with 25mm immersion thermometer
-
Peptide Synthesis Vessel, Solid Phase, Vacuum, Synthware, Capacity: 10-100mL available, Frit Porosity: Medium abd Coarse availabe, Frit OD: 15-40mm available, GL Thread: 14 or 25 available, Hose Connection OD: 8mm, Supplied with PTFE lined screw cap and straight bore stopcock with 2mm bore.
-
Synthware Rotary Evaporator Anti-Splash Traps with Fritted Discs
Kemtech AmericaSynthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Microscale Distillation Apparatus
Kemtech AmericaMicroscale Distillation Apparatus has a short-path design for microscale application, used with 25mm immersion thermometer, and D27 distillation receiver.
-
Synthware Vacuum Adapters with PTFE Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Tapered Distilling Adapters
Kemtech AmericaWith an outer standard taper joint at the top. The tapered delivery drip tube extends into open receivers.
-
-
Synthware Distillation Connecting Adapters
Kemtech AmericaSynthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.
-
SYNTHWARE Claisen Adapter
Kemtech AmericaClaisen Adapter, Microscale, Synthware, Joints: 14/10, supplied with two compression caps, two Viton O-rings and two PTFE-faced silicone septum.
-
SYNTHWARE Microscale Distillation Head
Kemtech AmericaWith 2mm glass stopcock and 24/40 joint. Supplied with a special 25mL long-neck flask for small volume efficiency.
-
SYNTHWARE Kugelrohr Distilling Bulbs
Kemtech AmericaKugelrohr Distilling Bulb Capacity: 5, 10, 15, 25 or 50mL available Joints: 14/20, Bulb O.D.: 25, 31, 35, 42 or 48mm available Overall Height: 80, 85, 90, 98 or 105mm available Used in distillation of very small amount of distillate at lower temperature with high efficiency.
-
SYNTHWARE Solvent Still Head with Drainage Port
Kemtech AmericaSolvent Still Head Capacity: 500 and 1000mL available Top Joint: 24/40 Bottom Joint: 24/40 and 29/42 available Side Joint: 14/20 Drainage Port Joint: 14/20
-
Synthware Vacuum Adapters with Glass Stopcocks, 90°
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
SYNTHWARE Snyder Distillation Column
Kemtech AmericaSnyder Distillation Column, 3 Section Top Outer Joint: 24/40 Lower Inner Joint: 24/40 Column Height: 150mm Overall Height: 300mm For use with Kuderna-Danish flask.
-
Synthware Vacuum Adapters, Outer Joint
Kemtech AmericaSynthware vacuum adapter has a standard taper outer joint and a serrated hose connection. Ideal for use as a vent or for the introduction of pressure/vacuum.
-
SYNTHWARE Graduated Distilling Cow Receiver
Kemtech AmericaTubes are graduated from 0-3mL in 0.2mL subdivisions.
-
Synthware Vacuum/Inert Gas Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
SYNTHWARE Distillation Cow Receiver
Kemtech AmericaDesigned for microscale application. With one female joint and four drip-tip male joints.