Glass Joints, Glass, Chemglass, Supplies
-
Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105° angle.
-
-
Solvent Reservoirs, Plastic Coated
ChemglassReservoirs used for storing high performance, low pressure liquid chromatography mobile phase. Complete reservoir system includes a plastic coated graduated bottle, a standard cap assembly, and solvent and sparging filters. Cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three…
-
Distillation Head, Vigruex, Jacketed
ChemglassVacuum jacketed Vigreux distillation head having a sealed on condenser, braced for strength. The top outer joint is for a 1” immersion 10/18 or 10/30 thermometer. Vacuum adapter has an inner joint and a sealed in drip tip. Condenser length is 100mm on the 14/20 size and 200mm on the 24/40 and…
-
Drying Apparatus, Abderhalden
ChemglassAbderhalden style for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and…
-
Gas Evolution Measurement Apparatus
ChemglassApparatus provides a convenient and accurate method for the determination of the concentration or purity of active metals and metal hydrides. Metals and metal hydrides that can be analyzed in this manner include borane-methyl sulfide complexes, borane tetrahydrofuran, sodium and lithium as…
-
Pressure Vessel, Heavy Wall
ChemglassHeavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The unique design allows hand tightening and loosing for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Vessels are useful for pressure…
-
Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.
-
Adapters, Luer
ChemglassAdapter allows for 1/8" OD PTFE tubing to be connected to glassware via a standard taper joint. Useful with vacuum manifolds or any other air sensitive transfer applications. Adapter can also be used with standard luer lock stainless steel needles; See CG-3075. Adapters are supplied with a…
-
Apparatus for use in distillation of material such as THF or ether. Storage reservoir has a capacity of 125mL or 500mL. Extremely efficient cold finger coil condenser has a section that is immersed into the distillate. This assures that the distillate is at room temperature instead of the…
-
Adapter, Connecting
ChemglassWith standard taper outer joint at the top, and inner joints on the bottom and sidearm, all being the same size. Inner joints are at a 75º angle to one another.
-
Adapter, Distilling
ChemglassAdapter is used to connect distilling column with vertical condensers. With standard taper outer joint at the top for use with 10/18 or 10/30 jointed thermometers. Both lower inner joints are the same size. Side arm is at a 75º angle to the vertical tube. For thermometers see CG-3506-N.
-
Bubbler, Double, Airfree®, Schlenk
ChemglassSimilar in design to AF-0513 but with two oil reservoirs. Bubbler is approx 125mm W x 135mm H. Hose connections are 9mm OD at the middle serration.
-
Adapter, Thermometer, 10° Offset
ChemglassAdapter has a 10/30 outer joint at the top for use with CG-3506 thermometers. When used with vertical side neck flasks, thermometers can be angled into the bottom of the flask. FOR THERMOMETERS SEE CG-3506-N.
-
Drying Tube, Schwartz
ChemglassSchwartz type drying tube having 14/20 hollow stoppers. Stoppers have a hole that aligns with a serrated hose connection for on/off action. Overall height is approximately 170mm.
-
Adapters, PTFE, Thermometer, Inlet
ChemglassMade entirely of PTFE, adapter has an inner joint of the listed size. The compression nut allows for vertical adjustment of thermometers or bleed tubes having an O.D. between 6 and 7mm. Supplied complete with one #108 Viton o-ring.
-
Adapters, Inlet, Airfree®, Schlenk
ChemglassGas inlet adapter with a 2mm glass stopcock having a constant pressure retention device. Available with a choice of inner or outer standard taper joint. Top arm is 9mm O.D. medium wall tubing for use with CG-3022 septum. Overall height of the 14/20 size is approx. 95mm while the 24/40 is approx. 120mm.
-
Adapters, Vacuum, PTFE Stopcocks
ChemglassVacuum Adapter has a ground glass standard taper outer joint on top that provides a convenient leak free way to connect to the OP-6602, OP-6603 and OP-6604 disposable long stem filter funnels and a taper inner joint or a vial. The unique design of the long stem filter funnel and vacuum adapter…
-
Similar to the AF-0072 adapter, but with two #15 o-ring joints. Available in 0-4mm, 0-8mm or 0-12mm valve sizes. Each adapter is supplied complete with (2) #116 Viton o-rings.
-
Adapter permits addition of solids into multi-neck flasks in a dry box, or addition of non-air sensitive compounds into flasks while purging with an inert atmosphere. Can handle from 50mg to 1 gram of solids and is made with a drip tube to avoid getting the solids on the joint or the wall of the…
-
Special S-40 size ball and sockets compatible with Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34 mm O.D. x 2.8mm wall tubing.
-
Adapters, Luer, Vacuum
ChemglassAdapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes or syringes to a standard taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Hose connection…
-
Gauge Shelf, Airfree®, Schlenk
ChemglassShelf is constructed of plexiglass with stainless steel support rods and is supplied complete with two bossheads for attachment to the uprights of the AF-0300-02 cart assembly. Center to center on support rods is 136mm.
-
Still head in 125mL or 500mL capacity for use in re-purification of solvents under inert atmosphere. One-piece design of condenser and storage reservoir eliminates multiple connections usually associated with distillation setup. 0-4mm Chem-Vac™ Chem-Cap® valves provide for grease-free,…
-
Adapters, Distillation, Claisen
ChemglassDistilling adapter having an outer member on the vertical side tube for use with a thermometer of the listed joint size and immersion. Sidearm has a standard taper inner drip tip joint while vertical tube has a top outer and lower inner joint, all being the same size. FOR THERMOMETERS SEE CG-3506-N.
-
Distilling Head, Short Path, Jacketed
ChemglassSimilar to CG-1239 but vacuum jacketed to improve efficiency. Available with Vigreux indentations in uptake tube to further increase the performance of the head. NOTE: The 14/20 size accepts a 1” immersion 7/12 or 10/18 thermometer, while the 24/40 and 29/42 sizes accept a 2”…
-
Adapters, Vacuum Take-Off, 105°
ChemglassWith standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105° angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
-
Used to purify and transfer solvents under inert conditions. Permits transfer of solvents directly into an evacuated storage vessel with 24/40 standard taper outer joints. A 0-4mm Chem-Vac™ Chem-Cap® valve is used for vacuum control.
-
Adapters, Distillation
ChemglassWith two standard taper inner joints, parallel, and at a 75º angle to the connecting tube.
-
-
Adapters, Claisen, Modified
ChemglassClaisen style adapter with an additional standard taper outer joint at a 45° angle to the vertical outer joint.
-
A 0-12mm Chem-Vac™ Chem-Cap® valve having an o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold. Adapter is available for #15, #25, and #30 o-ring joints. Complete gauge consists of a glass portion, a S.S. bushing drilled and tapped for 1/8 " NPT…