Y shaped, 3-way adpater. One outer joint, two inner standard taper joints. Great for adapting flasks and other Schlenk line components. All three joints are the same size.

Use Ace-Thred adapters to mate glass or PTFE (stainless steel core) baffles to any standard taper joint. See 5028 & 5030 series adapters. Baffles can be adjusted vertically or rotated to increase agitation.

Adapter, 15mm o-ring joint to standard taper or ball joints with o-ring seals. Fetfe o-rings for both joints are supplied.

Solid, virgin PTFE, standard taper, joint inserts. For 6467 series stainless steel, flat heads. Top of insert is outside standard taper joint that matches glass standard taper inner joints. Bottom is made with a reverse thread and comes with a PTFE collar and FETFE o-ring for attaching to the flat…

With standard taper outer joint and T-Bore, 2mm stopcock.

Vessel only, enables cooling of reactant material during photolysis plus the added feature of a 2mm bore, 1:5 PTFE stopcock at bottom for draining contents of vessel. Made of borosilicate glass to accommodate the immersion well. With one 14/20 angled joint for sparger tube, one 24/40 vertical joint…

Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve. PTFE adapter has front type seal using a CAPFE O-Ring to make a compression seal in the #15…

Adapter with bent hose connection top and either a standard taper or ball joint inner bottom. Codes -110,-112,-114 have an integral porosity A fritted disc.

Designed for use with inner member regular joints with only a slight mismatch. Treated on inner surface so that it may be cemented to glass with ACE 7560 epoxy adhesive. Sleeves may also be used uncemented to replace lubricant at low pressure differentials. ACE PTFE sleeves are accurately shaped to…

Used for reduced pressure filtration with 7186 style, plain stem Buchner funnels. Top is tooled to accept a pluro stopper, bottom has a joint. Serrated hose connection has a second ring of 13.5mm O.D. Inserting the recommended size pluro stopper and th

Adapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.

Stem below standard taper joint is 30mm. Hose connection is size C.

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable…

Straight connecting adapter with standard taper inner joints at both ends. Various lengths.

Heavy walled flange for large scale rotary evaporator condensers.

With standard taper joint at top. Capacity 100mL, in 1mL subdivisions.

Process pipe annealed u bend.

Designed for small quantities where holdup between flask and receiver must be minimized, but where it is also desired to measure vapor temperature with the accuracy of larger setups. Still body is available with or without vacuum jacket and with vigreu

Interchangeable ground joint bearing for use with our precision ground stirring shafts (8068,8070,8071,8073,9532,9533). Recommended top stirring speed with our 8117 Stir-Lube is 1500 rpm.

Glass joint, inner ground with ring on shank for use with threaded outer member or outer member with external thread for use with inner member.O-Ring and cap to form a leak tight-seal. For cap, see 7616; for O-Ring, see 7617.

High performance, low cost, effective in separating low-boiling liquid mixtures with volumes in 0.5 - 5mL range. 2.5" micro-distillation column separates close-boiling mixtures utilizing a PTFE band uniquely driven by an attached magnet. Complete assembly features either 10/10 joints, code -43, or…

Conical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.

Adapter, standard taper joint, 13mm OD center tube with bead,6mm OD tube end side arm.

pH probe adapter tube extends the probe deep within large capacity flasks. Fits in 45/50 opening on head and is vertically adjustable along its length. Available with either Chemraz or Fetfe o-rings and in 24 in(61cm), 36 in (91cm), or 48 in (122cm) le

Standard taper ioint with lower tube reduced in diameter to size listed. Length of extended tube 101mm.

Used to connect Ace-Thred to malejoint. Fabricated from PTFE. Supplied with one FETFE O-Ring.

Straight connecting adapter with inner or socket top and outer or ball bottom.

Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking…

Interchangeable, full length. These joints are machined from 18-8 type 303 free machining Stainless Steel and are supplied in accordance with CS21-58 of the N.I.S.T., O.D. and I.D. dimensions approximately the same as the glass joints listed under 7565. Shanks are machined for thread size listed…

Connecting, enlarging adapter with top female joint being larger than the bottom male joint.

Conical 4" (10.2 cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a thermometer side arm which is internally threaded for use with 5029 Nylon B

Complete with all parts needed for immediate operation. Borosilicate glass reactor has a 60/40 center joint, one 14/20 angled joint for sparger tube, 24/40 vertical joint for condenser, and one #7 Ace-Thred for thermometer. Volumes indicated are total volumes. Volume in reactive area of lamp is…