Stopcocks, Ace Glass, Supplies
-
-
Adapter, Distillation, Pilot Plant
Ace GlassDistillation adapter for use with Pilot Plant reactors. Simple design collects the distillate above a PTFE stopcock with swagelok compatible take-off. Available with either one or two upper joints.
-
Three-way High Vacuum Stopcock
Ace GlassO-Rings available. Three-way high vacuum stopcock for use in combining materials in proportion or as common feed distributed in proportion. Easy action plugs act independently of each other and are connected to a common tubulation through a variable opening. Supplied with FETFE O-Rings. Stem O.D.…
-
Replacement Stopcock Plug
Ace GlassReplacement stopcock plugs with inlet feeds for rotary evaporators. Codes -08, -10 for Buchi assemblies and -20 for Heidolph 4000 series. All plugs are 19/38.
-
Easy action PTFE plug with hooded handle, threaded into heavy wall glass barrel, permits smooth adjustment. Arms are at 90 degree angle. Double PTFE ring seal prevents exposure of FETFE backup O-Ring to corrosive gases and liquids. Plug, with hooded ha
-
Stopcock, Three-Way, T-Bore
Ace Glass3-way stopcock with T-bored solid glass plug. See Ace 8228 family for replacement plugs.
-
Stopcock, Metering Valve, 1:5 PTFE Plug
Ace GlassMetering valve, with 1:5 PTFE straight bore plug, provides fine control of rate of flow. With polished barrels. For plug only, see 8232.
-
Stopcock adapter featuring either a bent or straight hose connection and a glass or PTFE plug. See Ace 8223 for replacement glass plug and Ace 8224-04 for PTFE plug.
-
Stopcock Plug, Inlet Feed
Ace GlassPressure gauges for monitoring pressure in several pieces of apparatus such as pressure vessels, pressure reactors & chromatography columns. Pressure ranges vary from 0-60psi and up to 0-400psi. Gauges have different NPT end fittings and internal materials, as well as various dial ranges. Some come…
-
Stopcock Plugs, Double Oblique Bore
Ace GlassDouble oblique bore stopcock plugs available in 1:5 PTFE or Borosilicate.
-
Adapter, PTFE Stopcock, Inner Drip Tip
Ace GlassStraight connecting PTFE stopcock adapter with standard taper joints. Bottom joint connection has an inner drip tip tube.
-
Flickit Valve, Riley
Ace GlassQuick-open, valve-type stopcock with glass barrel, PTFE plug, and FETFE O-rings. Unique design allows introduction of particulates or capsules into a system using a rod or plunger. Barrel is angled with respect to the side arms, plug has corresponding
-
High vacuum stopcock with arms at 90 degree with variable openings from 0-3mm to 0-15mm. An ultimate vacuum of 10-7 can be realized with the standard three O-Rings. Smooth acting semi-needle valve permits fine adjustment of opening. Plugs available in
-
Stopcock adapter, top outer joint, bottom inner joint, glass plug. Spherical joint versions are both outer joints top and bottom.
-
Adapter, Stopcock and syringe port
Ace GlassStandard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.
-
Adapter, Stopcock, Hose connection
Ace GlassStopcock adapter featuring either a bent or straight hose connection and a glass plug.
-
Stopcock, High Pressure, Straight Bore
Ace GlassHigh pressure straight bore stopcock with solid plug.
-
High vacuum stopcock with easy action plug that has blunt, flat end instead of the tapered end supplied with 8194 or 8195. This modification means stopcock is a quick opening model versus the variable opening 8194 and 8195. Vacuums of 10-7 can be reali
-
High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine
-
Adapter, Sampling
Ace GlassWith standard taper 24/40 joints and 1:5 solid PTFE stopcock plug connected to side of apron for removing distillate or sample. Plug bore is 2mm. Approximate capacity 125mL. Code -04 has #7 Ace-Thred after stopcock, code -29 has plain tubing.
-
-
-
Adapter, Claisen, Stopcock
Ace GlassClaisen adapter. Center tube has 10/30 outer top for 76mm immersion thermometer and a 24/40 inner bottom. 75 degree take-off arm with 24/40 outer top and 24/40 inner stopcock side arm. Available with glass or PTFE stopcock plug.
-
Stopcock adapter, top outer joint, bottom inner joint, PTFE plug. Spherical joint versions are both outer joints top and bottom.
-
Stopcock adapter, top outer joint, bottom inner joint, Easy Action plug
-
-
Stopcock adapter, top and bottom o-ring joints, Easy Action plug,/p>
-
Adapter, Septum Inlet, with Stopcock
Ace GlassAir-sensitive sample handling adapter features either a glass or PTFE t-bore stopcock, standard taper joint and septum port arms. Supplied with two septa, Ace 9096 family.,/p>
-
PTFE Stopcock Valve, 2 Way
Ace GlassPTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.…
-
High vacuum stopcock, precision grade, with oblique bore hollow plug.
-
High vacuum stopcock with Tef-Cap O-Ring seals with variable openings from 0-3 to 0-10mm. Eliminate exposure to corrosive materials. For use to at least 13.6 Kg internal pressure. An ultimate vacuum of 10-7 can be realized with the standard three seals
-
Stopcock, Vacuum, PTFE, Low Hold-Up
Ace GlassThreaded vacuum stopcock with PTFE plug and new hooded handle that permits smooth needle valve adjustment down to 0.1cc/min. flow rate. In-line design of barrel offers less hold-up than with 8192 design. Double PTFE ring seals prevent exposure of FETFE