General Lab Products, Bellco Glass
-
Stainless Steel Shaft Assembly 250mL
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 250ml
-
Straight Harvesting Tube 4L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: odxid:1/4? x 5/32? x 4.0? long
-
Large Flange Air Stone Sparger 15L
Bellco GlassLarge flange air stone sparger for large flange vessels. Fits through stainless steel head plate fitting. These spargers fit through a 5/16? fitting. 316 l stainless steel Ra 32 finish or better Acrodisc filter assembly, 0.2 micron
-
Low Profile 3-Port Harvest Assembly 6L
Bellco GlassMaterial: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 10 9/32" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm pp blue open top screw…
-
3-Port Harvest Assembly 8L
Bellco GlassMaterial: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 15" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm pp blue open top screw cap &…
-
Metal Stone Sparger 5L For Flat Bottom Omni Vessels
Bellco GlassMetal stone sparger 5l for flat or round bottom omni vessels. Sparger inserts through stainless steel headplate fitting. 4 1/2?wide x 12? long 316 l stainless steel ra 32 finish or better Stainless steel frit
-
Straight Harvesting Tube 10L 1/2"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: od x id:1/2? x .430? x 10? long
-
Round Bottom Marine Impeller 15L
Bellco GlassBlade dimensions: 5 3/4" x 2" Shaft: 14 1/2" Stainless steel 4? od right hand pitch marine prop & e-clip Material: 316l stainless steel with electropolish finish For round bottom omni vessel (1964-88405) Need l/f head plate, over head drive motor
-
Thermowell Assembly 6L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
Silicone Headplate O-Ring 10L #274
Bellco GlassSilicone headplate o-ring for 10l bioreactor systems. Material: red silicone rubber Dimensions: od x id: 5.762?x 0.139? thick Size: #274
-
Acrodisc Thread Filter pkg.8
Bellco GlassThe ptfe 50 mm Acrodisc hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Has…
-
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Heating blanket - benchmark Flask size: 3l Watts: 295 Heating @ 5 watts per sq in Male iec connector for use with temperature controller Dimensions: 2"…
-
Straight Harvesting Tube 10L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: od x id:1/4? x 5/32? x 10.0? long
-
Micro-Carrier Screw Cap Assembly 100mm 500mL-3L
Bellco GlassPolypropylene screw cap with silicone gasket pouring ring and compression fitting.
-
Standard Micro-Tube 0.5mL Natural
Bellco GlassSize: 0.5ml Color: natural Material: homo-polymer polypropylene
-
Over Head Drive Vessel w/ 4 Baffles 36L
Bellco GlassManufactured from type 1 class a Borosilicate glass. Includes 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head drive and magnetic stirrer 100mm center neck…
-
Micro-Carrier Impeller Assembly 6-8L
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 6-8l Paddle dimensions: 3?x 7 3/4?
-
Air Stone Sparger 3L For MC Spinner Flasks
Bellco GlassGently introduces bubbles into vessels. Includes 45mm polypropylene cap and white silicone gasket. 316l stainless steel 20 ra finish Size: 3l 12mm od coarse glass frit 0.2um Acrodisc filter w/ hose fitting
-
Impeller Assembly 25mL
Bellco GlassGlass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. Glass shaft ptfe magnet Size: 25ml
-
Thermowell assembly is manufactured from 316l stainless steel with 32ra finish or better. It can be used with rtd temperature sensor. Includes polypropylene screw cap and silicone gasket. There are also tubes for addition media and vent. Thermowell assemblies attach to the sidearms with a screw cap…
-
L-Bubbler Tube w/ Holes,8L (10) .040 Holes
Bellco GlassSparging accessory for vertical sidearm spinner flasks. Manufactured from 316l stainless steel with electropolish finish. Includes polypropylene cap with 1/4? white compression fitting and white silicone gasket. .040 inch hole for aeration of fermentation cultures where shear force is less…
-
Stainless Steel Bent Harvesting Tube 5L 1/4"x16"
Bellco Glass316l stainless steel bent harvesting tube for 5l flat bottom omni vessel. Use with large flange head-plate. Size: 1/4" x 16" Id: 5/32"
-
Sparger for vertical sidearm spinner flasks. Includes polypropylene cap with 1/4? compression fitting and white silicone gasket. Material: 316l stainless steel with electropolish finish Ra 32 finish or better Size: 21?
-
-
Vent Filter Screw Cap 45mm
Bellco GlassManufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock
-
Straight Harvesting Tube 6L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: odxid:1/4? x 5/32? x 6.0? long
-
Valley Heating Blanket 115V-500mL 50 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Watts: 50 Dimension (in.): 1 1/2" tall x 10.5 diameter 1 latch 6f…
-
-
Compression Fitting 5/16in. For 1/2 Hole"
Bellco GlassBellco compression fittings are designed using our standard 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into sidearms or vessels. Bellco probe adapters are designed to allow…
-
Stainless Steal Bioreactor Headplate 7L
Bellco GlassManufactured from 316l stainless steel with ra 32 finish or better inside and out. Fittings are sold separately as part of the system.
-
Stainless Steel Shaft Assembly 1L
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 1l