Gas Equipment

Compare Tool

Select up to 3 products

HomeAll Products

Gas Equipment

1 - 29 of 29
Sort
View
Show
  • Gas Cylinder Clamps

    Ohaus

    Bench-Mounted Clamp (5592C10) Safety holder of cast aluminum for securing tanks 102 to 356 mm in diameter to bench or table in upright position Large cross-handle knob, which is easily turned by hand to tighten the clamping screw Large diameter rubber foot on screw prevents…

  • Gas Pressure Regulators

    Scott Specialty

    Single stage regulators for use with non-corrosive gas where single stage regulation is sufficient (5596C32, C35, C55, D40) Sintered metal filter on inlet stem to protect internal parts 2.5 inch diameter diaphragm for efficient pressure control Outlet needle valve, standard NPT(M) …

  • KIMAX Measuring Gas Buret

    DWK Life Sciences (Kimble)

    Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

  • DRIERITE Mini-Dehumidifier

    W.A. Hammond Drierite Co.

    The DRIERITE Mini-Dehumidifier is designed for the static absorption of moisture in closed containers of up to 6 cubic feet in volume. It meets the demand for a convenient, safe and efficient drying unit for the analytical balance or other small closed compartments, such as reagent storage…

  • Chemware FEP Gas Sampling Bags

    Saint Gobain

    Chemical-resistant, inert fluropolymer film Flexible Leakproof Applications include gas sample analysis, extraction of air samples from smoke stack exhaust systems, monitoring air quality and calibrating instruments in the field. Sturdy FEP bags are 5 mil thick and have low…

  • Indoor Air Quality, Carbon Dioxide (CO2) Meter

    Extech

    The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a…

  • 3L Gas Scrubber

    Chemglass

    Laboratory scale gas scrubber for use in many air and exhaust cleanup tasks. The 3 liter is a compact design and will fit into any laboratory hood, or can be used in walk in hoods when assembled on our CG-1951-100 mobile or CG-1950-100 bench-top reactor stands. Gas scrubbing takes place when the…

  • Balloons, wall thickness 12 mil

    MilliporeSigma

    General Description Thick-wall, natural latex rubber. Provide method for maintaining dry, oxygen-free atmosphere over small scale laboratory reactions. Slight positive pressure is maintained in balloon, which serves as reservoir to accommodate pressure changes and to ensure net flow of gas out…

  • Indoor Compact CO Monitor with Tilt Leg Stand

    Extech

    The CO30 is a CO Monitor which displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity. The CO30 features a programmable audible alarm with a high decibel beeper, sounds when CO concentration rises to unsafe levels. Unit can be wall mounted or used on a desktop close to…

  • Refrigerant Leak Detector

    Extech

    Extech’s Refrigerant Leak Detector is easy to use and is ideal for detecting leaks from air-conditioning units and cooling systems that use all standard refrigerants. The multi-colored LED light bar indicates the level of refrigerant detected by the RD200. Features a field replaceable heated…

  • Fyrite® InTech® Combustion Analyzer

    Bacharach

    The Fyrite® InTech® residential analyzer is a next generation redesign of our popular Tech 50/60, developed on the proven INSIGHT® platform to include more features with a lower cost of ownership. It provides rugged, reliable, long-running performance in a light, handheld unit -…

  • Indoor Air Quality, Carbon Dioxide (CO2) Monitor

    Extech

    The CO230 measures Carbon Dioxide (CO2), Air Temperature and Humidity, plus calculates Dew Point and Wet Bulb. Features Automatic Baseline Calibration (ABC) with disable for use in areas with continuously elevated CO2 levels. Its alarm function with user settable high/low CO2 level is perfect for…

  • Scienceware® Gas Dispersion Tubes

    Bel-Art - SP Scienceware

    Features Fritware® Porous Polyethylene Disc High-density polyethylene bell-mouthed fitting with a sealed-in, coarse porosity polyethylene disc at the large end results in smaller bubbles. 30.5cm long (12") x 6.35mm ID (1/4") low-density polyethylene tube is fitted to the…

  • DRIERITE Gas Purifier

    W.A. Hammond Drierite Co.

    This DRIERITE Gas Purifier is specially designed for gas chromatography and other applications requiring dry, pure gas. It will dry, purify, and filter gases used for chromatography and spectrometry. The purifier is filled with Indicating DRIERITE and 5A Molecular Sieves for the removal of…

  • Gas Dispersion Tube, Micro, Fritted

    Chemglass

    Micro size gas dispersion tube having a frit 7mm O.D. x 12mm. Stem is 6mm O.D. x 100mm long.

  • 20L Gas Scrubber

    Chemglass

    Laboratory scale gas scrubber for use in many air and exhaust cleanup tasks. Gas scrubbing takes place when the exhaust enters the inlet in the round bottom flask and travels upward through the absorption column. The scrubbing fluid is pumped from the round bottom flask upwards into the shower head…

  • Balloons, wall thickness 15 mil

    MilliporeSigma

    General description Thick-wall, natural latex rubber. Provide method for maintaining dry, oxygen-free atmosphere over small scale laboratory reactions. Slight positive pressure is maintained in balloon, which serves as reservoir to accommodate pressure changes and to ensure net flow of gas out…

  • Gas Washing Tubes

    DWK Life Sciences (Kimble)

    Choice of coarse or extra coarse porosity cylinder Gas dispersion tube has a hollow fritted cylinder at the end of the tube. Cylinder height x o.d.: 24 x 13 mm. stem diameter: 8 mm. Overall height: 250 mm

  • Laboratory Gas Drying Units

    W.A. Hammond Drierite Co.

    The DRIERITE Laboratory Air and Gas Drying unit is an all-purpose drier. This unit is suitable for most laboratory applications. It will dry air to a dew point of -100° F at atmospheric pressure or pressures up to 90 psig. A simple connection by rubber hose to the bottom inlet of the dryer…

  • Snifit Carbon Monoxide Analyzer

    Bacharach

    Accurate measurement of ppmCO Digital backlit display One button operation Resolution: 1 ppm Accurately measures carbon monoxide concentration levels in room air. Fast response sensor is electrochemically calibrated specific toCO and is factory calibrated to 100 ppm for…

  • testo 320 Combustion Analyzer Kit

    Testo

    Key Features: Field-replaceable, pre-calibrated sensors for accurate combustion system analysis Internal memory stores up to 500 combustion system analysis tests Hardened cam-lock probe connection guarantees leak-free operation and confidence of readings Fast 30-second startup so…

  • Fyrite® Classic Combustion Analyzers

    Bacharach

    The Fyrite® Classic series includes fast, easy to use instruments for measuring carbon dioxide or oxygen. The units, while looking very similar, differ in construction and absorbing fluid. Each model is suitable for only the particular gas and measurement range for which it was manufactured.…

  • Indoor CO/CO2 Meter Datalogging Meter

    Extech

    The Extech CO260 monitors indoor air quality for Carbon Monoxide (CO)and Carbon Dioxide (CO2) levels. In high concentrations these gases can affect the health and well-being of people and pets. Monitor CO2 levels in schools, office buildings, greenhouses, factories, hotels, hospitals,…

  • Miniature Regulator with Gauge

    MilliporeSigma

    Reliable pressure regulation to 1 psig (0.07 kg/cm2), indicated on a 0-60 psi (4.2 kg/cm2) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum…

  • PYREX Gas Washing Tubes

    Corning

    Consisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities

  • Carbon Monoxide (CO) Meter

    Extech

    Features: Ergonomic pocket size housing One button operation Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm Audible alarm starting at 35ppm with continuous beeping when above 200ppm Backlight for low light conditions Max Hold and Data hold buttons …

  • Double Ball Valve Assembly

    Water Saver Faucet Co.

    Application: Vandal-resistant deck mounted turret base with two laboratory ball valves at 180 degrees for on/off control of all laboratory gases. Valves are certified for gas service by CSA International and are recommended for ADA-compliant applications. Lever handles provide visual indication of…

  • Desktop CO (Carbon Monoxide) Monitor

    Extech

    The CO50 is a desktop CO Monitor which measures and displays carbon monoxide concentration, air temperature and humidity simultaneously. The CO50 features visibly bright LED lights which indicate active monitoring (green) or a surpassed CO alarm threshold (red). The meter also features an extra…

  • Carbon Monoxide (CO) Meter

    Extech

    With the CO15, checking CO levels is as easy as pushing just 1 button on the model CO15, which measures up to 999ppm. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the display will flash until the CO level goes down to normal…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.