L-Bubbler Tube w/ 10 .040 Holes, 15L Vertical Sidearm Vessels. Manufactured from 316L stainless steel. Supplied with cap and compression fitting. Specifications: Material: 316l Stainless Steel Ra 32 Finish Or Better Dimensions: 18 1/2" X 4 3/4" X.250" Tube With Hose Barb End .040 Holes

Ideal for use with Over Head Drive Vessels. Manufactured from 316L electropolished stainless steel with 32RA finish or better. Specifications: 1-Siphon Tube 15 5/8" Long 1-Fill Tube 2 17/64" Long 1-Vent Tube 1" Long Material: 316l Stainless Steel Includes: 45mm Screw Cap &…

2-Port Stainless Steel Assembly 15L Specifications: 2-Port 45mm Cap Assembly, 15l For 15l 1964 Style Over Head Drive Vessels Long Tube: 1/4?Od X 17 1/8? Short Tube: 1/4"Od X 2.156" All Tubes Extended Up 1.0? Above The Cap Slug Supply 45mm S/Cap & White Silicone Liner

IOB assembly uses smooth bearing action and fits under the 100mm screw cap with PTFE cap seal and silicone gasket. Allows for smoother and better mixing inside the spinner flasks. Specifications: Sizes: 3-6L

Water Jacketed Low Profile Over Head Drive Vessel w/ 4 Sidearms 6L Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 300mm Od X 325mm Overall Height 4 Vertical 45mm Sidearms 100mm Ctr Neck Supplied With: 100mm Pp Blue Screw Cap & White Silicone Liner…

Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Specification: 45mm Thermowell Assembly For L/P 6l Vessel …

PTFE impeller for use with over head drive motor and drive adapter in 3L low profile bioreactor vessel. Specifications: Size: 3-6L

The pressure relief valve is a cartridge check valve incorporating an innovative guided poppet design. This valve is the heart of the system and may be used alone or as a central component of the system. The valve has low pressure drop These valves are used to prevent flow of fluid (gas or liquid)…

2-Port Stainless Steel Assembly 36L Specifications: 2-Port 45mm Cap Assembly, 36l For 15l 1964 Style Ohd Vessels Long Tube: 1/4?Od X 18 1/4? Short Tube: 1/4?Od X 2.156? All Tubes Extended Up 1.0? Above The Cap Slug Supply 45mm S/Cap & White Silicone Liner

Headplate setup stand is for hands-free assembly of bioreactor headplates. Manufactured from aluminum and measures 8"x8"x3" assembled. Headplate is inserted into the slot on the stand and secured into place with thumbscrews. It holds any headplate up to 6mm thick Specifications: Material:…

Stainless Steel pitch blade for 10L bioreactor systems . Right hand upward.  Specifications: Material: 316L Stainless Steel Size: 3 1/4"

Stainless Steel port plug fits onto stainless steel headplate for 10 Liter bioreactor vessel. Specifications: 316L SST with Electropolish Finish 1/2-20 TPI Threads For 10L Bioreactor Systems - English Threads For 1/2" Port on Headplate Supply with SST Nut & O-Ring

Stainless Steel Sample Port Assembly. Specifications: For 3l Bioreactor - For English Threads Fits 3/8" Hole Material: SST 316L Dimensions: 9 3/16" OAL Insertion Length: 7 3/4" Tube: 1/4" OD X 5/32" ID With Ra 32 Finish Or Better With Hose Barb Supply With: O-Ring & SST…

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: #4 Hose Barbs For 1/2" Id Tubing Material: Type 1 Class A Borosilicate Glass Supplied: 45mm Polypropylene Blue Cap & Pouring Ring Size 3-6L

Low Profile 2-Port Assembly For Vertical Low Profile Vessels Specifications: Material: 316L Stainless Steel w/ Electropolish Finish All Tubes: 0.250" x 0.152" Vent Tube: 2 5/32" Siphon Tube: 9 1/2" Long Includes: Screw Cap A523-599 & White Silicone Liner A523-600

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: Size: 8l Material: Type 1 Class A Borosilicate Glass Dimensions Of W/J: 300mm Od X 440 Oah Dimension Of Inner Flask: 238mm Od X 420mm Oah …

316L Stainless Steel Sparger Assembly with Stainless Steel Frit for 3 Liter Bioreactor System. Specifications: English Threads Material: 316l SST With Electropolish Finish Ra 32 Or Better Tubing Specifications: .250" OD X .152" Id Overall Length: 10 43/64" Insertion Length: 9…

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with Bellco Over Head Drive and Magnetic Stirrer Specifications: …

3/4" Septum Port w/cap and stopper. Specifications: 316 L Stainless Steel Ra 32 Finish

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in reflux or distillation operations. Specifications: Size: 3-7L

Low Profile IOB Assembly 6L

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 polypropylene blue screw caps 45mm and pouring rings, also 1 polypropylene blue cap 100mm for the center. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Graduations: 8-36L Sidearms:…

Glass Liquid Addition Assembly for use on 45mm side arms. Assembly simply screws on and seals with a silicone liner. Assembly is autoclavable. Specifications: One Glass Addition Tube Type 1 A Borosilicate Glass One Compression Cap One Front & Rear Nylon Ferrule One Compression…

Low Profile 2-Port Assembly For Vertical Side Arm Low Profile Vessels. Used for addition or removal of liquids or media into the vessel. Specifications: 45mm 2-Port Assy For L/P 3l Vessels Seamed Welded - Electropolish 316l SST Material 32Ra Finish Or Better All Tubes: .250"OD X…

Water Jacketed Low Profile Over Head Drive Vessel w/ 6 Sidearms 6L Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 300mm Od X 325mm Overall Height With Six (6) Vertical 45mm Sidearms Supplied With: 100mm Pp Blue Screw Cap & White Silicone Liner & Six…

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: Size: 8l Material: Type 1 Class A Borosilicate Glass Dimensions Of W/J: 300mm Od X 440 Oah Dimension Of Inner Flask: 238mm Od X 420mm Oah …

Stainless Steel Sample Port Assembly 3/8" For 7L Bioreactor Specifications: Material: 316L Stainless Steel w/ Electropolish Finish Tubing: .250" x .152" Overall Length: 1415/16" Insertion Length: 12 7/8" Includes: Stainless Steel 3/8-24 Nut & O-Ring

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Compatible with Bellco Over Head Drives and Magnetic Stirrers. Suitable for all cell culture fermentation. Specifications:…

Used in 3, 7 and 10 liter bioreactors for 3/8" accessories in headplate. Specifications: Includes O-Ring and Hex Nut

The Bellco Low Profile PTFE Impellers are designed to be used with Bellco Low Profile Cell Culture vessels. These low profile impeller consist of a semi-rigid PTFE blade, PTFE paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Specifications: Paddle Size: 3" x 6…

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with Bellco Over Head Drive and Magnetic Stirrer Specifications: …

Vertical Disk Impeller Specifications: Material: 316L Stainless Steel For Bioreactor System