Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: #4 Hose Barbs For 1/2" Id Tubing Material: Type 1 Class A Borosilicate Glass Supplied: 45mm Polypropylene Blue Cap & Pouring Ring Size 3-6L

BCS Starter Kit  

Ideal for use with Over Head Drive Vessels. Manufactured from 316L electropolished stainless steel with 32RA finish or better. Specifications: 1-Siphon Tube 18" Long 1-Fill Tube 3 3/16" Long 1-Vent Tube 2 5/36" Long Material: 316l Stainless Steel Includes: 45mm Screw Cap &…

Water Jacketed Low Profile Over Head Drive Vessel w/ 6 Sidearms 6L Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 300mm Od X 325mm Overall Height With Six (6) Vertical 45mm Sidearms Supplied With: 100mm Pp Blue Screw Cap & White Silicone Liner & Six…

The Bellco sample system attaches to GL45 nozzle allowing the user to take repeated samples into a standard 50mL disposable centrifuge tube. The sampler is designed to connect to an existing pipe by mounting under the open cap. Samples are taken by evacuating air with the supplied syringe and…

Stainless Steel Vertical Disk Impeller 10L Specifications: For 10l Bioreactor Systems - English Threads Material: 316l Stainless Steel with Electropolish Finish 3 1/4" Od

The pressure relief valve is a cartridge check valve incorporating an innovative guided poppet design. This valve is the heart of the system and may be used alone or as a central component of the system. The valve has low pressure drop These valves are used to prevent flow of fluid (gas or liquid)…

Low Profile IOB Assembly 6L

This vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. Specifications: 100mm Neck For Cap Assembly And Overhead Drive 45mm Vertical Sidearm Accept Port And Thermowell Assemblies Or Probes Supplied With…

Water Jacketed Low Profile Over Head Drive Vessel w/ 4 Sidearms 6L Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions: 300mm Od X 325mm Overall Height 4 Vertical 45mm Sidearms 100mm Ctr Neck Supplied With: 100mm Pp Blue Screw Cap & White Silicone Liner…

Sparger Assembly for 6L Low Profile OHD Vessel. This fits through a 45mm sidearm. Designed for vertical side arm vessels. Specifications: Sparger Tube: 10 1/8" Long Material: Stainless Steel 20RA or Better 12mm Coarse Glass Frit (40-60µ) Gently Introduces Bubbles into Vessel

Sparger for 3L low profile Over Head Drive vessels to fit through a 45mm sidearm. Gently introduces bubbles into the vessel. Specifications: Material: 316L Stainless Steel w/ Electropolish Finish 32 RA or Better Sparger Tube: 8 1/2" Long w/ Glass Frit Porosity 12 Degrees Celsius 12mm…

Low Profile 2-Port Assembly For Vertical Low Profile Vessels Specifications: Material: 316L Stainless Steel w/ Electropolish Finish All Tubes: 0.250" x 0.152" Vent Tube: 2 5/32" Siphon Tube: 9 1/2" Long Includes: Screw Cap A523-599 & White Silicone Liner A523-600

Suitable for all cell culture and fermentation. The vessel is compatible with Bellco over head drives and magnetic stirrers. Supplied with 100mm center cap and 45mm caps and pouring ring. Specifications: 6 Sidearms 4 Baffles Includes: 100mm Center Cap 45mm Screw Cap And Pouring Ring …

Ideal for use with water baths for precise temperature control. Supplied with 100mm center cap, sidearms cap, and pouring ring. Specifications: Material: Type 1 Class A Borosilicate Glass. Dimensions: 300mm Od x 280mm Overall Height Two (2) #4 Hose Connections Supplied With: 100 Mm…

Over Head Drive PTFE Impeller Assembly 36L Ideal use for over head drive vessels.

Stainless Steel port plug fits onto stainless steel headplate for 10 Liter bioreactor vessel. Specifications: 316L SST with Electropolish Finish 1/2-20 TPI Threads For 10L Bioreactor Systems - English Threads For 1/2" Port on Headplate Supply with SST Nut & O-Ring

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 polypropylene blue screw caps 45mm and pouring rings, also 1 polypropylene blue cap 100mm for the center. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Center Neck Graduations: 8-36L Sidearms:…

Port Plug Assembly. Specifications: Used in 3, 7, and 10L Bioreactors Includes O-Ring and Hex Nut

Low Profile Stainless Steel Impeller Assembly 6L Low Profile Vessels Specifications: Requires Over Head Drive & Cap Assembly Material: Sst 316l Consist Of: Dust Shield, Shaft, Paddle, Locking Ring, Washer, Cotter Pin Four (4) Sst Set Screws: 8-32 X 1/4" Dimensions: 9 1/2" To…

45mm 3-Port Assembly for 1964 style for OHD vertical side arm vessels, 8L and 15L Specifications: Sealed Weld - Electropolish Finish Supplied With 45mm S/Cap & White Silicone Liner 316L SST Material, Ra 32 Finish Or Better 1 - Siphon Tube; 15" Long 1 - Fill Tube; 2 17/64"…

The Bellco Low Profile PTFE Impellers are designed to be used with Bellco Low Profile Cell Culture vessels. These low profile impeller consist of a semi-rigid PTFE blade, PTFE paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Specifications: Paddle Size: 3" x 6…

Manufactured from 316L stainless steel with electropolish finish RA 32 or better inside and out. Used for GL45 sidearms. Includes polypropylene blue open top screw cap and white silicone liner. Individual ports for liquid additions or redundant vent overlay VSA vessels for acid. Specifications: …

Over Head Drive PTFE Impeller Assembly 6L Ideal use for over head drive vessels.

316 L Stainless Steel Pitched Blade Impeller, 3L Specifications: Material: 316L Stainless Steel with Electropolish Finish Dimensions: 1 3/4" For 5/16" Shafts Usually Requires 2 Each

Stainless Steel Port Assembly, for 6 Liter Low Profile Vessel with Vertical Side Arms. Use for the addition or removal of liquids or media within the vessel. Specifications:  45mm Blue Polypropylene Screw Cap White Silicone Gasket 316l Stainless Steel Electropolished, Ra 32 Finish…

Manufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with Bellco Over Head Drive and Magnetic Stirrer Specifications: …

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in reflux or distillation operations. Specifications: Size: 3-7L

Stainless Steel port plug fits onto stainless steel headplate for 3 & 7 Liter bioreactor vessel. Specifications: Material: 316L Stainless Steel w/ Electropolish 1/2-20 TPI Threads For 1/4" Port on Headplate Includes: Stainless Steel 1/428" Nut & O-Ring, Stainless Steel 1/4"…

Reduced height vessels maximize incubator space. This vessel is suitable for all cell culture applications (Insect, Plant, & Bacterial). 100mm neck takes drive adapter and overhead drive motor. Supplied with 100mm polypropylene center cap, sidearm cap and pouring ring. Specifications: …

This vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Neck for Cap Assembly and Over Head Drive 45mm Vertical Sidearm accepts Port and…

Vertical Disk Impeller Specifications: Material: 316L Stainless Steel For Bioreactor System