Gas Chromatography, Supplies
-
5-Neck Reaction Vezzel Lid, Angled 20°
Chemglass5-Neck 200mm Flange, 45/50 Center Neck (2) Vertical 45/50 Outer Side Neckss (2) 60mm O-Ring Flange Side Necks Angled 20°
-
Cellulose adsorbents for TLC
MACHEREY-NAGELCellulose MN 301: native fibrous cellulose, standard grade, fiber length (95 %) 2–20 μm, average degree of polymerization 400–500, specific surface acc. to Blaine 15000 cm2/g ≤ 20 ppm Fe, 6 ppm Cu, 7 ppm P, CH2Cl2 extract ≤ 0,25 %, residue on ignition at 850 °C ≤ 1500 ppm
-
Mininert valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. Models are available for screw-cap and crimp-top vials. The crimp-top valve for 20 mm ID glassware slides into the neck of the vial. Turn the threaded flange to secure a tight fit.
-
Unlike brass brushes that can leave a metal residue, these stainless steel tube brushes (3/8-, 3/16-, and 1/4-inch) work well for cleaning dirty collectors, injector ports, and detector ports. The surface brush can be used to remove residue that builds up on metal detector jets and electronic contacts.
-
Excellent thermal stability at injection port temperatures up to 450°C!
-
Click-On Traps measure: 8 1/2" x 1 1/4" (21.6 x 3.2cm) Note: Replacement trap only—fittings sold separately.
-
OHD Vessel w/6 S/A,8L
Bellco GlassManufactured from Type 1 Class A Borosilicate glass. Includes 4 or 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Compatible with Bellco Over Head Drives and Magnetic Stirrers. Suitable for all cell culture fermentation. Specifications:…
-
Norell® Standard Series™
MilliporeSigmaThe Norell Standard Series NMR tubes are redesigned to eliminate tube wall and bottom variations. This improves shimming times and sample reproducibility.Manufactured out of ASTM Type 1 Class B glass, or commonly referred to as N-51A, these NMR tubes are designed for auto-sampling systems and…
-
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.
-
Sigma-Aldrich® electroporation cuvettes
MilliporeSigmaFits most brands of electroporators. Use for bacterial transformations, eukaryotic transfections, and the electroporation of mammalian cells and yeast. Manufactured to tight tolerances for optimum performance. •Use the 0.1 cm gap width for bacteria (white cap) •Use the 0.2 cm gap size width for…
-
Made from high-quality stainless steel Meets original manufacturer's equipment performance
-
Self Tightening Column Nuts
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Capillary Column Tags
MilliporeSigmaPermanently label capillary columns. •Soft enough to imprint with a ball-point pen •Big enough for all necessary information •Lightweight and will not damage column
-
The inlet seal at the base of the GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement. Siltek treatment provides inertness…
-
Alumaseal Ferrules
RestekAlumaseal ferrules combine the advantages of graphite and Vespel/graphite ferrules, and eliminate the disadvantages, for enhanced performance in any application. The unique front and back ferrule design seals easily and surely, the ferrules will not fragment or off-gas, and they are stable to…
-
-
Purge/Trap K Vocarb® 3000 for use with Encon
MilliporeSigmaPurge/Traps K Vocarb® 3000 (for use with Encon) efficiently trap analytes in US EPA Methods 502.2 and 524. Legal Information: Vocarb is a registered trademark of Siemens Industry, Inc.
-
TLC Micro Set M
MACHEREY-NAGELMaterials kit for scientific education This kit is prerequisite for the separations with kits F1, F2 and F3. In addition, it serves as basic equipment for the individual study of further thin layer chromatographic experiments.
-
UHP stainless steel regulators are the standard for ultra-high-purity and corrosion-resistant pressure regulation. They are more easily purged of atmospheric components compared to brass gas regulators, making them ideal for the most demanding applications. Stainless steel is especially useful in…
-
Wilmad® NMR tubes
MilliporeSigmaMade of Pyrex® borosilicate glass (unless otherwise noted) for compatibility with ground joints, valves, and vacuum racks. Precision ground and highly polished for spinning stability and highest resolution.Tubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes…
-
-
Spectrophotometer cuvettes, polystyrene With stopper
MilliporeSigmaSee transmission curve labelled D Synonyms: cuvette; spectrophotometer cuvette; spectrophtometry uv
-
3/4 Septum Port w/Cap Bioreactor"
Bellco Glass3/4" Septum Port w/cap and stopper. Specifications: 316 L Stainless Steel Ra 32 Finish
-
All traps measure: 10 5/8" x 1 3/4" (27 x 4.4 cm)
-
Wilmad® NMR tubes
MilliporeSigmaTubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes that are 9 in. L are for making standards and for use with tip-off manifolds. Economy and disposable Wilmad NMR tubes are best used for high-throughput NMR spectroscopy. (All economy tubes come with caps) …
-
NUCLEODUR® C18 ec bulk packings
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
Performance for these purifiers is optimized by incorporating a multiple-bed format that progressively lowers concentrations of contaminants at each successive bed. VICI Mat/Sen purifiers are guaranteed to produce gases that are purer than 99.9999%, when supplied with gas of 99.995% purity, and are…
-
PTFE Coated Needle Tip Thermocouples
ChemglassDesigned for use for small volumes, these 17 gauge hypodermic needle thermocouples can be inserted through septa into a reaction. They are PTFE coated and sealed at the end for liquid tight applications. Available in 3-1/2 or 7 inch lengths with 72 inches of PTFE coated extension wire. Please…
-
Wilmad® screw-cap NMR
MilliporeSigmaPrecision Wilmad NMR tubes are suitable for high field NMR spectroscopy. NMR tube has an open-top, screw-thread cap with a PTFE/silicone septum that permits addition of reactants or samples via syringe through the cap. Also good for sample storage. Caps and septa are replaceable.Excellent for…
-
Parker Back Ferrules
RestekPlease note: Nuts and ferrules are not treated unless requested (custom parts). Nuts and ferrules normally are not in contact with sample pathway, and thus do not require coating.