Gas Chromatography, Supplies
-
TLC Micro Set M
MACHEREY-NAGELMaterials kit for scientific education This kit is prerequisite for the separations with kits F1, F2 and F3. In addition, it serves as basic equipment for the individual study of further thin layer chromatographic experiments.
-
GC Installation Kit
RestekThis kit contains the tubing and fittings needed to add an additional GC to your lab bench. Kit includes: tubing cutter, one 1/8-inch x 1/4-inch reamer, one 1/4-inch x 1/8-inch brass tube end reducer, one 7/16-inch wrench, one 1/2-inch wrench, four 1/8-inch brass tees, ten 1/8-inch brass nuts, ten…
-
Allow wrench-free column installations Available for standard (1/16") and compact (Agilent-style) ferrules Made from high-quality stainless steel
-
Can easily be packed with wool for dirty samples. Visually observe the Press-Tight connection between the column end and liner Fit 0.32 and 0.53 mm ID capillary columns (column ODs from 0.5 mm to 0.8 mm) Slotted top prevents obstruction of carrier gas flow Two designs available …
-
Visible below inlet insulating cup for easy, breakage-free column installation without removing cup. Finger-tight design to allow wrench-free use. Available for standard (1/16") and compact (Agilent-style) ferrules. Made from high-quality stainless steel. Meets or exceeds original…
-
Scoring Wafer with Handle
RestekCeramic wafer is straight-edged for cutting fused silica tubing cleanly Unique, ergonomic handle is made of soft, comfortable rubber
-
Use for providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments.
-
Hellma® absorption cuvettes
MilliporeSigmawith PTFE lid Legal Information: Suprasil is a registered trademark of HERAEUS QUARZGLAS GMBH & CO.
-
3/8 Port Plug Assy "
Bellco GlassUsed in 3, 7 and 10 liter bioreactors for 3/8" accessories in headplate. Specifications: Includes O-Ring and Hex Nut
-
Gas Clean Filters
Agilent TechnologiesThe Gas Clean Filter System delivers clean gases, reducing the risks of column damage, sensitivity loss and instrument downtime. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…
-
2 Port SST Assy, 36L For Vertical OHD Vessels
Bellco Glass2-Port Stainless Steel Assembly 36L Specifications: 2-Port 45mm Cap Assembly, 36l For 15l 1964 Style Ohd Vessels Long Tube: 1/4?Od X 18 1/4? Short Tube: 1/4?Od X 2.156? All Tubes Extended Up 1.0? Above The Cap Slug Supply 45mm S/Cap & White Silicone Liner
-
Pressure regulators and gauges for air and hydrogen 1/8-inch bulkhead allows easy hookup to instrument Rated for inlet pressures to 250 psi (1,724 kPa) Rated for outlet pressures of 0 to 60 psi (0–414 kPa)
-
Wilmad® quartz (CFQ) EPR tubes
MilliporeSigmaClear Fused-Quartz (CFQ), is a naturally occurring material. It has a high dielectric constant and low levels of paramagnetic impurities. This NMR tube is suitable for use in routine testing in EPR spectropscopy, excluding UV irradiation and samples with low sensitivity. Synonyms: Wilmad nmr…
-
L/P Glass Impeller Assy, 6L
Bellco GlassLow Profile Impeller Assembly 6L Specifications: Dimensions: 14" w/ Compression Fitting & Cap Paddle Size: 3" x 7" Wide Low Profile Impeller Assembly
-
3/8" Addition Port Assembly For 3, 7 and 10 liter Bioreactor Systems/Vessels. Hose barb end allows easy attachment of silicone tubing. Specifications: English Threads Fits .375" Hole In Headplate Dimensions: 2" Long Tube: 1/4" OD X 5/32' ID Material: SST 316L - Ra 32 Finish -…
-
Sykes-Moore Wrench
Bellco GlassIdeal for holding the Sykes Moore Culture Chamber. Consist of two pieces, one flat aluminum holder, and a round aluminum chamber. Specifications: Holder Dimensions: 1 3/4" x 1 1/2" x 1/2" Notch: 1.270" x .875" Chamber Holder: 1 1/4" x 5/16"
-
Tee Wrench
RestekHold 1/4" or 6 mm tee or cross fittings secure in multiple orientations during installation Fits easily in tool box, pouch, or belt Cushioned vinyl grip with generous gripping area For Swagelok fittings only
-
L/P 2-Port SST Assy,6L
Bellco GlassStainless Steel Port Assembly, for 6 Liter Low Profile Vessel with Vertical Side Arms. Use for the addition or removal of liquids or media within the vessel. Specifications: 45mm Blue Polypropylene Screw Cap White Silicone Gasket 316l Stainless Steel Electropolished, Ra 32 Finish…
-
Parker Elbows (Treated)
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
Inland 45 Pump Oil
RestekRecommended for most mass spectrometers. Ease at cold start. Low vapor pressure 10 -7 torr. Nontoxic and noncorrosive. Compatible with buna-N, neoprene, and Viton seals. Optimum vacuum pump performance. Lowest mass spectrometer background. Recommended for optimum mass spec performance.
-
Coldfinger Ass'y, 3L
Bellco GlassUsed to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in reflux or distillation operations. Specifications: Size: 3-7L
-
TPP® TubeSpin bioreactor tubes
MilliporeSigmaLegal Information: T3P is a registered trademark of Archimica GmbH
-
POLYGOSIL® Irregular silica, Octadecyl phases
MACHEREY-NAGELPOLYGOSIL® Irregular silica phases for LC, C18 (ODS) modified for reversed-phase (RP) applications Features Irregular silica for analytical application, pH stability 2–8 Available pore sizes 60, 100, 300 and 1000 Å Available particle sizes 5 µm, 7 µm…
-
Use of these liners helps ensure an inert GC flow path for higher sensitivity, accuracy, and reproducibility. Consistent quality with exceptional batch-to-batch uniformity Low to zero bleed or background contamination
-
TLC Micro Set F3
MACHEREY-NAGELThis kit contains all chemicals required for: Separation of analgetics (pain relievers) Drug analysis as shown for cinchona bark For the separations with kit F3, the materials kit TLC micro-set M is prerequisite.
-
L/P Thermowell Assy, 3L For L/P Vessels
Bellco GlassLow Profile Thermowell Assembly 3L. Thermowell Assemblies are used to hold inside one tube the RTD temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Specifications: 45mm…
-
Parker Reducing Unions
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…