GC Equipment & Instruments
Some instruments within this category offer cuvettes which is essential equipment for accurate gas sampling and analysis. The design of these products can ensure of reliable results in gas chromatography applications.
Vial racks are an excellent solution to organizing your sample handling and storage. The racks available can offer 2 mL vials for streamlined processing.
The electronic leak detector is a vital safety device, enabling the quick identification of leaks in GC systems, ensuring the accuracy of experiments, and safeguarding of lab personnel. Magnetic seals play a critical role in maintaining system stability and performance, essential for consistent chromatographic results.
Our GC equipment and instruments are designed to optimize gas chromatography processes. This range improves lab efficiency and safety and is compatible with other lab equipment.
-
Tools and general accessories for GC
MACHEREY-NAGELDiamond file: a useful tool for cutting capillaries and smoothing ends of capillaries. Square capillary ends without protruding particles are especially important for butt connections (e.g., in Valco unions). Magnifying lens: a very versatile tool for any laboratory. In capillary GC it is…
-
L/P Vessel W/4 S/A, 6L
Bellco GlassThis vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. Specifications: 100mm Neck For Cap Assembly And Overhead Drive 45mm Vertical Sidearm Accept Port And Thermowell Assemblies Or Probes Supplied With…
-
Increase the versatility of your Agilent 5890 GC by replacing the existing 30 psig (207 kPa) backpressure regulator and gauge with our 60 psig (414 kPa) regulator. Enables you to use longer 60 m and 105 m columns as well as shorter 10 m columns. Includes complete instructions.
-
Parker Plugs
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
SGE's microcontrol valves provide precision metering and on-off control of gas flows. They are designed specifically for chromatography applications and may be used at elevated temperatures from high vacuum to medium pressure. The valves are vacuum rated to a leak rate of 1 x 10- 5 cc/sec…
-
54-Piece Tool Kit
RestekSet comes with screwdrivers, pliers, wrenches, sockets, scissors, clamps, and more. Durable, zippered, notebook-style carrying case for easy transport.
-
Valve Loops For GC
Agilent TechnologiesInclude loop, nut and ferrule, 1/16 in. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Unmodified POLYGOSIL® silica
MACHEREY-NAGELPOLYGOSIL® Irregular silica phases for LC, unmodified, SiOH, normal phase Features Irregular silica for analytical application, pH stability 2–8 Available pore sizes 60, 100, 300 and 1000 Å Available particle sizes 5 µm, 7 µm and 10 µm
-
Parker Tube End Reducers
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
S/Sl Inlet Split Vent Trap Front Threaded Trap Shell, Used With Series 7890 Gas…
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Parker Reducing Unions
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
Wilmad® NMR tubes
MilliporeSigmaTubes have round bottoms and include a sandblasted marking spot for labeling samples. Tubes that are 9 in. L are for making standards and for use with tip-off manifolds. Economy and disposable Wilmad NMR tubes are best used for high-throughput NMR spectroscopy. (All economy tubes come with caps) …
-
PTFE Stopcock Vacuum Manifolds
ChemglassGeneral purpose single bank vacuum manifold with 4 or 6 ports. Main tube is 1" OD with a serrated hose connection, having the smallest serration 13.5mm and the largest serration 15.5mm, located at either the left or right side for vacuum connection. Ports are 4mm PTFE stopcocks with serrated…
-
For Gases and Low Molecular Weight Compounds (MW 30-225)
-
Formulated from crude oil stocks known for their durability and line-lubricating qualities Use in Agilent 5973/5972/5971 and GCD mass spec systems, or in other manufacturers’ MSD systems that require rough pump oil Under average use, the oil in the foreline rough pump should be replaced…
-
-
Photoionization (PID) Lamps
RestekModel 108-10.0/10.6 offers both 10.0 and 10.6 eV potential, has a 0.781" base diameter, and is used in Tracor, OI, and Baseline instruments. Model 103 has a 1.375" base and is used in HNU and SRI detectors. Model 108-BTEX lamp’s higher output makes it ideal for detection of BTEX compounds.
-
Parker Male Connectors
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
Two-way PTFE-Valves
BürkleTwo-way valves made of solid PTFE with hose nozzles. Resistant to chemicals. Very easy connection thanks to its excellent antifriction properties. Blue handles made of PP. Resistant to compression max. 1 bar Vacuum suitable up to 10 -1 mmHg Autoclavable
-
Reusable—will not deform and stick in fittings Less torque needed to seal ferrule Restek’s unique blend of graphite minimizes fragmentation and out-gassing
-
Nylon stopcock features 3-way control with female Luer-Lock inlet and male Luer-Lock outlet ports.
-
POLYGOPREP Irregular silica, Cyano phases (nitrile)
MACHEREY-NAGELPOLYGOPREP Irregular silica phases for liquid chromatography, CN (cyano, nitrile) modified Features Irregular silica for preparative application, pH stability 2–8 Available pore sizes 60, 100, 300 and 1000 Å Available mean particle sizes 12 µm, 20 µm, 30…
-
Protect your instrument and improve data quality with this powerful pair from Restek. Checking for leaks and verifying flows before you start helps you avoid costly problems later. Restek’s New Leak Detector Redesigned and better than ever, our new leak detector is an essential tool for…
-
Hi-Duty Tubing Cutter
RestekSpecifically designed to cut 1/8" to 1-1/8" (4 mm to 28 mm) OD tubing. Easily cuts stainless steel, Monel alloy, and other hard-temper materials. Unique design makes clean, right-angle cuts and eliminates spiraling. Integral reamer folds away for safety and convenience. …
-
Hellma® absorption cuvettes
MilliporeSigmawith PTFE lid Legal Information: Suprasil is a registered trademark of HERAEUS QUARZGLAS GMBH & CO.
-
Parker Unions
RestekParker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular…
-
Hellma® absorption cuvettes
MilliporeSigmaHellma® absorption cuvettes, standard cells, Macro with glass lids (spectral range 200-2500 nm, pathlength 1 mm, chamber volume 350 muL) are available in high-performance Suprasil quartz material. The highest level of sensitivity in the measurement can be achieved by suitably selecting the cell for…
-
-
Hellma® absorption cuvettes
MilliporeSigmaHellma® absorption cuvettes, standard cells, Macro with PTFE stoppers (spectral range 200-2,500 nm, pathlength 10 mm, chamber volume 3,500 muL) are available in high-performance Suprasil quartz material. The highest level of sensitivity in the measurement can be achieved by suitably selecting the…
-
Reducing Ferrules
RestekAvailable in graphite or Vespel/graphite material. Graphite Ferrules Preconditioned to eliminate outgassing High-purity, high-density graphite Smoother surface and cleaner edges than conventional graphite ferrules Contain no binders that can off-gas or adsorb analytes Stable…