Tubing Cutter

Compare Tool

Select up to 3 products

Tubing Cutter
1 - 32 of 37
Sort
View
Show
  • Tubing Cutter

    Agilent Technologies

    Tubing cutter, for plastic or PEEK tubing.

  • Scienceware® Plastic Tubing Cutter

    Bel-Art - SP Scienceware

    Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (1/16 to 3/4") O.D. Spring-loaded jaw will remain closed for safety when not in use Replaceable, hardened steel blade makes clean, straight cuts

  • Tubing Cutter

    Dynalon

    Product Dimensions (l x w x h) : 3x1x1in Edges cut with the hose cutter are always clean and flat,  even in the case of thick hoses.

  • Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Produces a straight, clean cut every time! This handheld tubing cutter is ideal for portable rugged use.

  • Made of nickel-plated zinc alloy, with hardened steel cutting wheels Spring-loaded, to remain open until used For tubes up to 38 mm diameter

  • Cutting wheel for cutting 1/16" and 1/8" stainless steel tubing Clean, right angle cuts with minimal burring or chipping of the tubing No additional reaming or deburring is required Spare cutting wheels are available

  • Produces square, smooth cuts in 1/16-inch tubing Eliminates tubing distortion Cuts hard or soft copper, aluminum, brass, stainless steel, Monel alloy, or titanium Replaceable cutting wheel

  • …to 1-1/8" (4 mm to 28 mm) OD tubing. Easily cuts stainless steel, Monel alloy, and other hard-temper materials. Unique design makes clean, right-angle cuts and eliminates spiraling. Integral reamer folds away for safety and convenience. Replacement cutter wheels also available.

  • Attaches to laboratory table tops up to 1-3/4" (45mm) thick. Cuts glass tubing up to 1-1/2" (38mm) diameter. Aluminum alloy casting with gray hammerloid finish. Hardened steel cutting wheel.

  • Excellent for cutting 1/8- or 1/4-inch metal tubing* Compact size is ideal for tight spaces Replaceable cutting wheel *Not for use with stainless steel tubing.

  • PEEK TUBING CUTTER 1EA

    MilliporeSigma

  • …microcentrifuge tubes For tubes up to 1.5 mL; maximum cut diameter: 9.4 mm (0.370") Retrieve radioactive pellets from the tips of tubes easily without resuspension or the risk of splashed radioactive substances. Can be used with polyethlyene, polypropylene or polyallomer tubes.

  • Flow Cell Assemblies

    IBI Scientific

    … IBI offers a complete line of accessories and replacement parts for your flow cell apparatus. Accessories include clear polycarbonate culture media and waste bottles with tubing, peristaltic pumps, luer connectors & tube racks of effluent collection, drip chamber, and diamond glass cutters.

  • KNIFE TUBE CUTTER

    Agilent Technologies

  • Adaptable for different shaving needs Electric surgical shaver for laboratory animals, with blade assembly that snaps out of fixed cutter head for cleaning or changing blade size Safety latch releases blade assembly without use of tools; removed assembly can be sterilized separately …

  • Fused Silica Tubing Cutters

    Agilent Technologies

    Conveniently designed, pencil-shaped tool and a ceramic wafer that allow you to make clean and easy cuts in fused silica, glass and aluminum-clad capillary columns.

  • Wheel Replacement for Tubing Cutter

    GSC International, Inc.

    These replacement cutter wheels fit our tubing cutter . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to …

  • Cutter Tubing Single Wheel, Pack of 10

    GSC International, Inc.

    This device is useful for cutting glass tubing. It has a single blade. We also sell replacement cutter wheels . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer, birth defects, or…

  • Cutter Glass Tubing, Single Wheel

    GSC International, Inc.

    This device is useful for cutting glass tubing. It has a single blade. We also sell replacement cutter wheels . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause cancer, birth defects, or…

  • Tube cutter,plier type,1/pk

    Agilent Technologies

  • Hose Cutter

    Bürkle

    Edges cut with the hose cutter are always clean and flat, even in the case of thick hoses.

  • Consistently make precise, clean, square cuts with a diamond blade Built-in magnifier to verify square cut Use with 0.25 mm ID to 0.53 mm ID tubing (0.78 mm OD maximum)

  • …Straight, 6-Foot Length Stainless Steel Tubing Individual 6-foot (± 1/2") straight pieces. In response to customer requests, we offer 6-foot straight lengths of 1/8-, 1/4, and 3/8-inch treated tubing. This tubing can be cut to your exact requirements using a standard tubing cutter.

  • …x 1/4"""" fnpt Brass- 3 Adjustable Safety Relief Valve Brass 50 - 150 PSI- 3 1/4"""" fnpt x 1/8"""" Comp Fitting Brass- 3 1/8"""" Port Connector Brass- 3 1/8"""" Ferrule Brass- 3 1/8"""" Compression Brass Nut- 3 1/8"""" Compression Brass Fitting Cap- 3 Tubing Cutter 1/8"""" Tubing- 1 PTFE Tape- 1

  • …is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows (2) PEEK Column Connectors (2)

  • This kit contains the tubing and fittings needed to add an additional GC to your lab bench. Kit includes: tubing cutter, one 1/8-inch x 1/4-inch reamer, one 1/4-inch x 1/8-inch brass tube end reducer, one 7/16-inch wrench, one 1/2-inch wrench, four 1/8-inch brass tees, ten 1/8-inch brass nuts, ten…

  • …PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool wrench, open-end wrenches, and more. Kit includes: PEEK Column Connector (beige, round body), 10-pk. PEEK Tubing, 1/16" OD x 0.005" ID x 3 m (red stripe), ea. PEEK Tubing,

  • Split/Splitless Injection Port Kit

    Agilent Technologies

    …O-rings, ungreased for trap fitting, 12/pk Non-Stick Fluorocarbon O-ring, 10/pk Glass wool, pesticide grade Plastic fitting, 10/pk Liner, direct, 2mm ID, deactivated, 2 each Universal column nut, 2/pk Capillary tubing cutter, 4/pk 11 mm Non-Stick BTO septa, 50/pk Tool, wrench

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.