1200°C maximum temperature 120 or 350 cu. in. capacities Built-in vent port Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature…

Features: Available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both…

Achieve consistent temperature control with the Thermo Scientific™ Thermolyne™ Atmosphere Controlled Ashing Furnace, which reaches 975°C with the standard stainless-steel manifold and 1093°C with the optional inconel manifold.  Key Features: Adjustable gas…

High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases…

The FO series represents the standard type of muffle furnaces which uses a microprocessor controlled thermoregulator and is capable of heat processing characterized by excellent repeatability. Due to high adiabatic characteristic, temperature rises in a very short time Space-saving and…

The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates…

The high-temperature furnaces HTC 16/16 - HTC 450/16 are heated by vertically hung SiC rods, which makes them especially suitable for sintering processes up to a maximum operating temperature of 1550°C. For some processes, e.g. for sintering zirconium oxide, the absence of interactivity between…

Use Thermo Scientific™ Thermolyne Premium Large Muffle Furnace Accessories to increase the utility of the Large Muffle Furnace.

Moldatherm® ceramic fiber insulation with embedded heating elements provides fast heat-up and recovery Setpoint and actual temperatures are displayed simultaneously on controller Heat-reflecting inner shell creates two insulating air spaces Fast, reliable, cost-effective answer for those…

High performance muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility.  Excellent heat tightness with a firmly sealed chamber…

With their unbeatable price/performance ratio, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz…

Similar to 5311M25 but with microprocessor control, which permits the operator to select eight ramps and eight dwell segments. Push button controls for setting program; program memory is non-volatile and will last for more than a year without power. Two year manufacturer's limited warranty.

For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

Large furnace TGA/DSC that’s well suited for samples up to 900µL with a temperature range up to 1100°C. Includes a 6 place microgram balance. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler…

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity. Tmax 1100°C Heating from two sides by…

Program segments into Thermo Scientific™ Lindberg/Blue M™ Box and Tube Furnace Controllers for increased temperature accuracy. Features overtemperature control and multiple segment configuration; designed to work with the 1200°C split-hinge and 1500°C box furnaces. …

CF1800 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is…

STF1200 50x600mm (OD x length) portable split tube furnaces feature spiral wire coils embedded in Mitsubishi (Japan) alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by a 30-segment digital controller. All…

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing…

Configure Thermo Scientific™ Lindberg/Blue M™ 1200°C Split-Hinge Tube Furnaces for horizontal or vertical use. Features independent digital temperature control modules (sold semperately) which are available in standard or programmable options.  Key Features …

CF1200 series muffle furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

TF1800 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace…

Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your…

Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C  Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting…

CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

Ai TFM2 series dual-zone tube furnaces use the famous Kanthal (Sweden) coil wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan)…

GCF1700 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

These fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300°C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold up to 35 minutes with an opening…

Ai TFM3 series 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with +/-1°C…

These powerful laboratory muffle furnaces are available for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to…