Ace Glass Funnels
-
Funnel, Filter, 14/20
Ace GlassDiameter of sintered glass filter disc is 18mm. Measures 40mm from disc to bottom of joint. All porosities of a given size are priced the same. Volume approximately 10 mL. Hose connection is size A.
-
With jacket for cooling or heating. All porosities of a given size are priced the same. Hose connection is size C.
-
Funnel, Pressure, Equalizing, Graduated
Ace GlassPressure equalizing, addition funnel featuring standard taper joints, protected drip-tip, equalizing arm and double scale graduations calibrated from the stopcock. Available PTFE stopcock styles are standard, metering or needle valve. Top stopper is not included.
-
Funnel, Pressure Equalizing
Ace GlassCylindrical with standard taper joint top and bottom and drip stem. Stopcock has glass plug. Drip stem does not extend beyond joint, age. Stopcock available with glass plug or 1:5 PTFE plug. thereby eliminating possible source of breakage. For same fun
-
Addition-Storage Funnel
Ace GlassPermits solutions to be prepared with No. 13654-24 Stirring Magnet and added portion wise. The T-bore stopcock in the equalizing arm permits isolation of the contents for storage. Capacity, 100 or 250mL. Lower threaded stopcock is all PTFE. Outer joint is standard taper 14/20 or 24/25, inner joint…
-
Funnel, Filter, Buchner
Ace GlassWith ACE fritted disc. Porosities A, B, C and D are priced the same.
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Funnel, Filter, Buchner
Ace GlassBuchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.,/p>
-
Cylindrical, graduated reservoir permits determination of volume added at any time during pumping cycle. By stopcock manipulation, material may be pumped from graduated (10mL in 0.1mL) side tube only. This permits obtaining accurate pumping rate over short periods of time. Top joint is 24/40 outer.…
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Threaded stopcock with PTFE plug permits smooth needle valve adjustment down to 0.1cc/min. flow rate. Double PTFE ring seals prevent exposure of backup O-Ring to corrosive liquids. Angled position makes manipulation of stopcock easier than conventional style. 24/40 joints top and bottom, double…
-
Funnel Addition, Jacketed
Ace GlassGraduated addition funnels similar to 7268 series, except with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is either 2 or 4mm bore PTFE plug. Bot
-
Funnel, Filter, Buchner
Ace GlassBuchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.
-
Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel, Powder, Angled, Heavy Wall Glass
Ace GlassHeavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.
-
Funnel, Filter, Hirsch, Adjustable
Ace GlassMicroscale, vacuum adapter with vertically adjustable Hirsch filter funnel that is suitable for use with all Microscale flasks and vials with 14/10 joints. Two-piece adapter features a #7 Ace-Thred at top with a Nylon bushing and O-Ring that forms a compression seal with funnel stem, bottom joint,…
-
Similar to 9495, except lower stopcock is solid 1:5 PTFE metering valve, side arm plug is regular 1:5 solid PTFE. For replacement plugs, see 8232 or 8224.
-
Funnel, Addition, Graduated
Ace GlassCylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE stopcock plug.
-
Funnel, Powder
Ace GlassUseful in pouring powders or liquids into ground joint containers. Available with standard taper or spherical inner joint. Funnels without joints listed under 7242.
-
Funnel, Powder
Ace GlassGlass powder funnel used for the addition of material to containers with standard taper joints. See Ace 7242 family for funnels without joints.
-
Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduat
-
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when…
-
Funnel, Addition, with Jacket
Ace GlassDouble scale graduated funnel with jacket for cooling with dry ice. Calibrated from stopcock. With 1:5 PTFE stopcock plug; for extra plugs, see 8224. For stoppers, order 8250-12.
-
Cylindrical with joint at top and bottom and drip stem. Stopcock on equalizing arm permits filling funnel without having to open the system to atmosphere. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12 or 8255-10.
-
-
Funnel, Separatory, PTFE Plug
Ace GlassSeparatory funnel features a PTFE stopcock and a standard taper joint with drip tip. Stopper is not included.
-
Extraction Apparatus
Ace GlassDesigned for the extracting of liquids with ether. The dispersion of the ether is accomplished by the use of an ACE fritted disc, Por. B (70-100m), which is attached to the base of the funnel tube. With 24/40 and 40/50 joints. Available in the following sizes.
-
With straight, open top and a 2mm bore 1:5 taper PTFE stopcock plug. Porosity A frit, 145-174 micron.
-
Funnel, Separatory, Globe
Ace GlassGlobe style separatory funnel featuring a 175mm stem below the PTFE stopcock and supplied with a flask length top stopper.
-
Funnel, Separatory, Squibb, Pear-Shaped
Ace GlassSeparatory funnel featuring a glass stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel Separatory, Safety
Ace GlassThe safest separatory funnel available, our 7247 funnel features a plastic coating, a removable PTFE drip tip and pressure relief rodaviss threaded cap and stopper. Common accidents involving separatory funnels are breaking the glass drip leaving a jag
-
Funnel, Addition, Pilot Size, Ace-Thred
Ace GlassLarge separatory funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete