Ace Glass Funnels
-
Funnel, Separatory, Squibb, Pear-Shaped
Ace GlassSeparatory funnel featuring a glass stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Cylindrical with joint at top and bottom and drip stem. Stopcock on equalizing arm permits filling funnel without having to open the system to atmosphere. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12 or 8255-10.
-
Funnel, Liquid Addition, Offset
Ace GlassBorosilicate glass, liquid addition funnel with offset bottom joint Bottom standard taper joint with PTFE stopcock is offset to one side to accomodate space on crowded reactor heads, also allows for a larger funnel to be used. Top and bottom standard t
-
Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel, Addition
Ace GlassWith an equalizing arm and a special stopper so that material may be isolated from the atmosphere. Turning the stopper completely closes the vessel to the equalizing arm so that the funnel may be disconnected without exposing contents to moist air, etc
-
Funnel, Filter, Hirsch
Ace GlassUseful where it is necessary to wash the precipitation and redissolve with chemicals which would attack filter paper. Angle of funnel 60 degree.
-
Funnel, Separatory, Globe
Ace GlassGlobe style separatory funnel featuring a 175mm stem below the PTFE stopcock and supplied with a flask length top stopper.
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Funnel, Addition, Pilot Size, Ace-Thred
Ace GlassLarge separatory funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete
-
With jacket for cooling or heating. All porosities of a given size are priced the same. Hose connection is size C.
-
With straight, open top and a 2mm bore 1:5 taper PTFE stopcock plug. Porosity A frit, 145-174 micron.
-
-
Funnel, Addition, Graduated
Ace GlassCylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE stopcock plug.
-
Funnel, Powder Dispensing, Vertical
Ace GlassA vertical, compact screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore
-
Funnel, Separatory, PTFE Plug
Ace GlassSeparatory funnel features a PTFE stopcock and a standard taper joint with drip tip. Stopper is not included.
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Extraction Apparatus
Ace GlassDesigned for the extracting of liquids with ether. The dispersion of the ether is accomplished by the use of an ACE fritted disc, Por. B (70-100m), which is attached to the base of the funnel tube. With 24/40 and 40/50 joints. Available in the following sizes.
-
Funnel, Powder, Angled, Heavy Wall Glass
Ace GlassHeavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.
-
Funnel, Pressure Equalizing
Ace GlassCylindrical with 24/40 standard taper joints top and bottom and drip stem. Stopcock has 1:5 PTFE plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with glass plug, see 7291.
-
Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduat
-
Funnel, Pressure, Equalizing, Graduated
Ace GlassPressure equalizing, addition funnel featuring standard taper joints, protected drip-tip, equalizing arm and double scale graduations calibrated from the stopcock. Available PTFE stopcock styles are standard, metering or needle valve. Top stopper is not included.
-
Similar to 9495, except lower stopcock is solid 1:5 PTFE metering valve, side arm plug is regular 1:5 solid PTFE. For replacement plugs, see 8232 or 8224.
-
Funnel, Filter, Buchner
Ace GlassBuchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.
-
Funnel, Pressure Equalizing
Ace GlassCylindrical with standard taper joint top and bottom and drip stem. Stopcock has glass plug. Drip stem does not extend beyond joint, age. Stopcock available with glass plug or 1:5 PTFE plug. thereby eliminating possible source of breakage. For same fun
-
Funnel, Powder, Flat Side
Ace GlassPowder funnel with standard taper joint and one flattened side for easy of use with multi-neck flasks.
-
Threaded stopcock with PTFE plug permits smooth needle valve adjustment down to 0.1cc/min. flow rate. Double PTFE ring seals prevent exposure of backup O-Ring to corrosive liquids. Angled position makes manipulation of stopcock easier than conventional style. 24/40 joints top and bottom, double…
-
Cylindrical, graduated reservoir permits determination of volume added at any time during pumping cycle. By stopcock manipulation, material may be pumped from graduated (10mL in 0.1mL) side tube only. This permits obtaining accurate pumping rate over short periods of time. Top joint is 24/40 outer.…
-
Funnel, Powder, Heavy Wall, 58 degree
Ace GlassStandard taper jointed powder funnels are fabricated with heavy walls for greater durability when pouring powders or liquids into ground joint containers.
-
Funnel, Filter, 14/20
Ace GlassDiameter of sintered glass filter disc is 18mm. Measures 40mm from disc to bottom of joint. All porosities of a given size are priced the same. Volume approximately 10 mL. Hose connection is size A.
-
For use with ACE Pressure Reactors. Heavy wall funnel has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head or One-Piece Reactor and has a bump and groove that restricts blowout when…
-
Borosilicate glass addition funnel with integral fritted disc. Has outer top standard taper joint, an inner standard taper joint bottom,a 2mm glass stopcock arm at top and a 0-4mm Hi-Vac valve bottom outlet. Ideal for either vacuum or Schlenk lines. Top and Bottom joints are the same size.