Lab Separatory Funnel
-
These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
European squibb style separatory funnel with a PTFE stopcock. Supplied complete with a glass stopper of the listed size. For replacement stoppers see CG-3000.
-
SYNTHWARE Separatory Funnels with Standard Taper Joint
Kemtech AmericaSeparatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper
-
SYNTHWARE Separatory Funnels with PTFE Stopcock
Kemtech AmericaSeparatory Funnel, PTFE Stopcock PTFE or Glass Stopper Capacity: 10-1000mL Stopper Joint: 14/20, 19/22, 24/40, 29/42, No. 13, No. 22, No. 27 and No. 16 available Stopcock Bore: 2 or 4mm
-
Globe KIMAX® Separatory Funnels with PTFE Stopcock
DWK Life Sciences (Kimble)KIMAX® funnel is supplied with a Standard Taper ground glass stopper and a PTFE stopcock Gradually tapering shoulders and a wide neck facilitate cleaning Sharp separations are provided for by a narrow bore in the body just above the stopcock Replacement stopper is 850100 Replacement…
-
Funnel 500 ml Cs4
CorningThese 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …
-
Plastic Separatory Funnel Holder
United Scientific SuppliesThis non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
Holder Separatory Funnel 125-500ml
Glas-ColThe funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The…
-
Globe Style Separation Funnels with Glass Stopper and Stopcock
SP Wilmad-LabGlassThis borosilicate glass pear-shaped separatory funnel is supplied with a Standard Taper glass stopper and a Standard Taper glass stopcock.
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
PEAR Pear-shaped dropping/separatory funnel TRANSPARENT & DURABLE Made of high quality Borosilicate 3.3 glass - Transparency allows for high visibility FOR SEPARATION Used to transfer liquids - Using the stopcock allows fluids, including reagents, to dispense slowly (drop-wise) …
-
Glass Separatory Funnel
Vee Gee ScientificVEE GEE Scientific Separatory Funnels with Stopper meet ASTM E-1096 Type 4 Specifications for Classification, Design, and Markings. These separatory funnels feature smooth tooled tips, large, white block letters, and large marking squares. Supplied with PTFE stopcocks to eliminate freezing and…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
-
Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
These replacement 125mL PYREX® glass separatory funnels have inner and outer 19/22 Standard Taper joints. They require Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcock plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
Funnel 125 ml
CorningThese 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement…
-
SYNTHWARE Separatory Funnels with Squibb Glass Stopcocks
Kemtech AmericaSeparatory Funnel, Squibb, Glass Stopcock, Synthware, Capacity: 30-1000mL available, Stopper Size: #13, #16, #22, or #27, Stopcock Bore: 2 or 4mm, Supplied with flask length glass stopper.
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
Squibb shaped separatory blank complete with tooled and finished ground stopper neck top. Lower portion of blank is unfinished and requires a stopcock to be sealed. NOTE: SUPPLIED WITHOUT STOPPER.
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
These 125mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination.
-
Funnel Squibb Pear PTFE Stpk 2000ml
DWK Life Sciences (Kimble)KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…
-
Squibb style separatory funnel with a PTFE stopcock. Not supplied with stopper. For stoppers see CG-3000. Stopcock bore on all sizes is 2mm.
-
Glass Separatory Funnel Kits
Across InternationalIntroducing the new Ai separatory funnel kits with all PTFE valves. A separatory funnel, also known as separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two…
-
SYNTHWARE Sure-Grip Separatory Funnels
Kemtech AmericaSeparatory Funnel, Sure Grip, Glass or PTFE Stopper, Synthware, Capacity: 500-2000mL available, Stopper Size: #27, PTFE Stopcock Bore: 4mm, Straight section between globe and stopcock provides a sure grip while shaking and also aids in clamping.
-
KONTES® Non-Vortexing Separatory Funnels
DWK Life Sciences (Kimble)These separatory funnels prevent the vortexing of liquids during phase separation. The funnels are designed with an internal baffle plate to divert the liquids being separated from vortexing and then remixing The funnels are supplied with PTFE stopcocks and Standard Taper 29/42 center…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PE stopper of the listed size. For replacement stoppers see CG-8740.
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
Funnel, Separatory, Globe
Ace GlassGlobe style separatory funnel featuring a 175mm stem below the PTFE stopcock and supplied with a flask length top stopper.
-
Separatory Funnels, Squibb, Pear-Shaped, Standard Taper Stopper, with Totally…
DWK Life Sciences (Kimble)KimCote® plastic-coated funnel is supplied with a standard taper ground glass stopper and a totally autoclavable PTFE stopcock plug. Lower stems have an I.D. large enough so that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation and eliminating the…