Flasks, Glass, Supplies
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
Thomas-Schoniger Replacement Combustion Flasks
labForce® (powered by Thomas Scientific)Conical, of heavy-wall borosilicate glass All sizes have Standard Taper 34/28 ground joints and bell-shape lip 65 mm wide x 30 mm deep. 500 mL flask is 195 mm high: 1,000 mL flask, 230 mm. Without stopper or platinum carrier.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
Can be used with direct drive motor or magnetically driven paddle assembly Side baffles enhance aeration and agitation of flask contents Proprietary "stretch" impeller design ensures optimal stirring 4, 45mm vertical sidearms permit use with sidearm probes and fittings Vessels…
-
These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Trypsinizing Flasks
DWK Life Sciences (Wheaton)For forming cell suspensions through trypsin digestion of connective proteins Fluted design improves homogenization Autoclavable with screw cap Constructed of borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Caps have white styrene butadiene…
-
PYREX® Kjeldahl Flasks
CorningRound bottom and long neck 30 mL size has square-cut mouth for multiple micro digestions; mouths of larger sizes are tooled for uniform rubber stopper fit. 30 mL flask conforms with ASTM Standard E 147 for microchemical apparatus; 100 mL through 800 mL flasks can be used in ASTM E 258 procedure.
-
Airless-Ware Kjeldahl Schlenk Flasks
DWK Life Sciences (Kimble)With a unique design for the manipulation of air-sensitive and moisture-sensitive compounds Features a modified Kjeldahl shape that facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer The bottom of the flask is shaped to fit Kontes oil…
-
6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…
-
Magna Flex™ Microcarrier Spinner Flasks
DWK Life Sciences (Wheaton)The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
Nephelo Culture Flasks
DWK Life Sciences (Wheaton)For use with turbidity meter or nephelometer Scratch and striation free side tube Available with or without cleanout port Autoclavable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements 38-430 top cap and 20-415 sidearm cap have white styrene…
-
Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…
-
Full length 24/40 joint on all sizes except 50 mL, which has Standard Taper 19/38 joint Graduated scale indicates approximate volumes Extra large marking space
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper stopper
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Iodine Flasks
DWK Life Sciences (Kimble)Iodine flask with size 22 stopper Size 22 PTFE standard taper stopper is included A durable matte-finish ceramic enamel marking spot takes writing and erases easily Designed from ASTM Specification E1404, Type II, Class 3 requirements
-
Thomas Combustion Flask Replacements and Accessories
labForce® (powered by Thomas Scientific)6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…
-
KIMAX Dissolution Flask
DWK Life Sciences (Kimble)Capacity 1000 mL, 108 mm o.d. x 165 mm high Precision-formed borosilicate glass flask for determining the relative dissolution characteristics of drugs in capsule or tablet form. Flasks are suitable for use with most existing equipment.
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.
-
KIMAX Kjeldahl Flasks
DWK Life Sciences (Kimble)Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.