SP Wilmad-LabGlass Lab Flasks
-
3 Neck Reaction Vessel/Kettle Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…
-
Jacketed Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…
-
Cylindrical Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.
-
Bidwell-Sterling Moisture Traps with Vapor Connection
SP Wilmad-LabGlassFor the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…
-
ProCulture® Fernbach Shaker Flasks with Beaded Rim
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio Beaded rim ensures a greater resistance to chipping Available without baffles or with three standard baffle indents to improve agitation during shaking Neck accommodates standard rubber stoppers Durable white ceramic…
-
ProCulture® Fernbach Shaker Flasks with GL45 Screw Thread
SP Wilmad-LabGlassIdeal for cultures that require a large surface area to volume ratio With three standard baffle indents to improve agitation during shaking Supplied with GL45 closure Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
4 Neck Molded Reaction Vessel Covers
SP Wilmad-LabGlassThese borosilicate glass 4-neck reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with…
-
ProCulture® Magnetically Driven Vortex Impeller Only
SP Wilmad-LabGlassVortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration of media All components are autoclavable Impeller components are made from FDA approved materials
-
Class A Saybolt Viscosity Volumetric Flask
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, this heavy walled borosilicate glass viscosity flask has a top with reinforced lip and is used in determining Saybolt viscosity of petroleum and bituminous materials. This receiving flask can be used in Saybolt viscometer baths. Conforms to ASTM D…
-
3 Neck Flat Flange Reaction Vessel Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange…
-
ProCulture® Shaker Flasks with Delong Neck and Standard Baffles
SP Wilmad-LabGlassThree standard baffle indents to improve agitation during shaking Long neck reduces splashing that could reach the closure Neck accommodates polypropylene and stainless steel closures Durable white ceramic marking spot Manufactured from ASTM Type I, Class A borosilicate
-
Cylindrical Jacketed Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.
-
Class A Volumetric Flasks with Plastic Stopper
SP Wilmad-LabGlassThese borosilicate glass volumetric flasks are provided with a plastic closed-bottom stopper which fits the Standard Taper ground zone. Stopper design prevents the neck from breaking if flask is tipped over. Calibrated "to contain" (TC) at 20°C.
-
ProCulture® Magnetically Driven Cap Assembly Only
SP Wilmad-LabGlass70, 100 and 120 mm caps are manufactured from glass filled PBT 70, 100 and 120 mm caps supplied with red rubber liner and Ultem impeller retaining nut Shur-Lok® 140 mm cap design has an unique compression O-ring design to insure tight internal seal of the flask and is supplied with Ultem…
-
Stainless Steel Quick Release Clamps
SP Wilmad-LabGlassMade entirely from stainless steel, these clamps firmly hold reaction vessels with Duran® flanges, and lids together. Quick release mechanism has a screw adjustment for tension control of flange.
-
Round Bottom Short Single Neck Flasks
SP Wilmad-LabGlassWith excellent chemical durability for contamination free results, these short neck borosilicate glass round bottom boiling flasks have a single neck with a full length Standard Taper outer joint.