Volumetric Flasks, Flasks, Supplies
-
Polymethylpentene (PMP) and polypropylene (PP) volumetric flasks are an excellent break-resistant alternative to glass. Class A per DIN EN ISO 1042. Supplied with matching PP standard taper joint stoppers.
-
Flask Complete 6000 ml
CorningThese PYREX® 6L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
Class A, USP, certified volumetric flasks. These are supplied with a glass stopper with a dripping tip. Available in both transparent and amber color. High contrast blue enamel print on transparent flasks and white on amber flasks represent the optimum combination of resistance and readability.…
-
Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class" A" unserialized flasks and ASTM E-288. Supplied complete with one closed bottom polyethylene stopper. For additional stoppers, see CG-8740. NOTE: THE CG-1602-20 CONFORMS TO ISO 1042, DIN 12664…
-
Made of high quality, heavy duty, borosilicate 3.3 glass USP compiant Class A tolerance conforms with ISO 1042 standards Includes calibration certificate from ISO accredited testing lab Fitted with an interchangeable polyethylene stopper Features a single graduation mark for precise dilution…
-
Volumetric Flask, Class A, with Glass Stopper, Batch Certified
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included. Meets Class A specifications per ASTM E-288. Batch certified.
-
These PYREX® standard volumetric flasks conform to Class A capacity tolerances prescribed by ASTM. However, to facilitate transfer of crystals, salts and powders, the open end has been expanded on the 25mL and 50mL sizes. The standard 18-410 G.P.I. thread screw caps have a durable cone-shaped…
-
Class A Volumetric Serialized Flasks with Stopper
SP Wilmad-LabGlassGlass quality, calibration lines, inscription and appearance are maintained according to the former NBS circular 602. Flask has a marking spot in addition to a serial number. Calibrated to contain (TC) at 20°C. Supplied with stopper.
-
Class A Volumetric Flasks
BrandTech®Screw cap or stopper Meet Class A tolerances per DIN EN ISO 1042 PFA or PMP construction Highly transparent Easy to clean Flasks are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heat and chemical contamination. PFA surface properties offer…
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
An excellent alternative to glass flasks, these glass flasks are made from PMP are gravimetrically calibrated to contain at 20º C. These plastic volumetric flasks meet Class B tolerances per DIN EN ISO 1042.
-
These flasks are for use in determining phosphoric acid in mixed fertilizer. Flasks feature a wide neck and heavy construction throughout.
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw…
-
-
Class A Volumetric Serialized Cylindrical Flasks with Stopper
SP Wilmad-LabGlassFeaturing a wide base for greater stability, these borosilicate glass flasks have a serial number and a marking area. Its design addresses the needs of smaller volume vessels. All sizes are made to meet the requirements of ASTM E 237. Calibrated "to contain" (TC) at 20°C and supplied…
-
Volumetric Flask made of high quality, heavy duty, 3.3 borosilicate glass Class A tolerance complies with ISO 1042 standards Features a single graduation mark for precise dilution and preparation Ground glass socket fitted with a chemical resistant polyethylene stopper. > Volumetric Flask made…
-
Synthware Heavy Wall Volumetric Flasks
Kemtech AmericaHeavy Wall Available from 5mL-1000mL Individually Certified Class A Glass Stopper included
-
Class A Volumetric Heavy Duty/Wide Mouth Amber Flasks with Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C and amberized for light sensitive studies, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The…
-
An excellent alternative to glass flasks, these glass flasks are made from PMP are gravimetrically calibrated to contain at 20º C. These plastic volumetric flasks meet Class B tolerances per DIN EN ISO 1042.
-
KIMAX® RAY-SORB® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PE…
DWK Life Sciences (Kimble)RAY-SORB Processed Glass with PE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with…
-
Ground Glass Flask Stopper Clear
Vee Gee ScientificThe Sibata Glass Stopper is lightweight yet very strong to reduce chipping and breakage. It meets ASTM E-675 specifications.
-
Similar to CG-1600 but with the addition of a mixing bulb between the calibration line and the stopper. The mixing bulb contains approximately one tenth of the flask capacity and aids in the mixing or dissolving of the flask contents. Supplied complete with one solid glass pennyhead stopper. For…
-
Volumetric Flask, Class A, with Glass Stopper, Individually Certified
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included. Meets Class A specifications per ASTM E-288. Individually serialized and certified.
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw cap or…
-
KIMAX® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PTFE Stoppers
DWK Life Sciences (Kimble)Clear Glass With PTFE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars …
-
KIMAX Brand Class A Accuracy Volumetric Flasks
DWK Life Sciences (Kimble)KIMAX® flask calibrated to contain Class A accuracy but without a serial number Supplied with a polyethylene snap cap Replacement cap is 28150R Designed from ASTM Specification E288 requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…
-
Flask, Volumetric, Class A, Cap, 50 ml
DWK Life Sciences (Kimble)Permanently marked with an individual serial number, providing an easy way to track items used during analytical testing Carefully selected to meet the Class A requirements as specified in ASTM E 288 - Standard Specification for Volumetric Flasks Supplied with a Certificate of Graduation…
-
Class A Volumetric Flasks, Heavy Duty, Wide Mouth, Glass Stopper
SP Wilmad-LabGlassCalibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…
-
Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand hardware.
-
Volumetric Flask
Vee Gee ScientificSIBATA Class A, to contain, volumetric flasks meet ASTM E-288 Class A Specifications & USP Standards for volumetric glassware. These flasks feature machine-blown bodies and heavy-beaded, heavy-tubing necks which are tooled for standard taper stoppers. The graduation line is sharp and permanent;…
-
PYREX® Class A Volumetric Flasks
CorningThese PYREX® volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for Standard Taper glass stoppers. Stoppers are…
-
Volumetric Flask, Class B, with Snap Cap
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included.