Boiling Flasks, Flasks, Supplies
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
SYNTHWARE Round Bottom Vertical Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
SYNTHWARE Round Bottom Flasks with Spherical Socket Joints
Kemtech AmericaSYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
Round bottom, single neck flask with a beaded tube end well.
-
-
Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.
-
Borosilicate Glass Flat Bottom Boiling Flasks
United Scientific SuppliesBorosilicate Glass Flat Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.
-
ValueWare® Flat Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Single Neck Flat Bottom Flasks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
These 250mL PYREX(r) low actinic flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical…
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
SYNTHWARE Round Bottom Angled Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Borosilicate Glass Round Bottom Boiling Flasks with Ground Glass Joints
United Scientific SuppliesBoiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the laboratory.
-
Boiling Flasks
GSC International, Inc.These quality round bottom boiling flasks are made from heat-resistant borosilicate glass, and have 24/40 ground glass joints and thick walls. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer,…
-
Borosil® Flat Bottom (Florence) Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate, Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for…
-
Flask, Round Bottom, Beaded Tube Port
Ace GlassRound bottom, single neck flask with a beaded tube end port.
-
Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 35/25 socket. Plastic Coated to prevent injury from broken glass while preventing spillage of hazardous materials.
-
Round bottom flask with five necks arranged 3 in-line, one standard taper front and one #7 Ace-Thred front (ideal for suspending a thermometer or probe). All necks are vertical. Available in heavy wall. Supplied complete with a 5029-10 nylon bushing an
-
Borosil® Round Bottom Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate. Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for added…
-
SYNTHWARE Round Bottom Flasks with Joint Hooks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, single neck flask with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness. Flask has two hooks 180° apart for use with stainless steel joint springs.
-
SYNTHWARE Round Bottom Angled Four Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Round bottom flask with four necks arranged 3 in-line and one #7 Ace-Thred neck (ideal for suspending a thermometer or probe) at 90 degrees. The 500ml and 250ml sizes have angled side necks while the larger sizes feature vertical necks. Available in he
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.
-
-
Round bottom, single neck flasks design for use with our 6810 series giant extractor apparatus.
-
SYNTHWARE Round Bottom Flasks with Threaded Side Inlets
Kemtech AmericaSYNTHWARE round bottom, heavy wall, flask with standard taper outer joint and threaded side port. All sizes are hand blown from tubing to ensure uniform wall thickness. Side port is for insertion of thermometer or bleed tube having an O.D. between 5mm and 7.5mm.