Boiling Flasks, Flasks, Supplies
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
ValueWare® Round Bottom Flasks, Short Neck, Full-Length
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Angled Two Neck Round Bottom Flasks
DWK Life Sciences (Kimble)Two-neck heavy wall flask with Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
SYNTHWARE Round Bottom Angled Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
These PYREX(r) round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.
-
Pear Shaped Boiling Flasks
DWK Life Sciences (Kimble)Single-neck flask with a Standard Taper outer joint at top Heavy wall Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
SYNTHWARE Microscale 3-Neck Round Bottom Flasks
Kemtech AmericaRound Bottom Flask, Micro Scale, Synthware, Capacity: 25, or 50mL available, Joints: 14/10 threaded.
-
Flasks, Flat Bottom, Long Necks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
Borosilicate Glass Flat Bottom Boiling Flasks
United Scientific SuppliesBorosilicate Glass Flat Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
SYNTHWARE Microscale Round Bottom Flasks
Kemtech AmericaRounRound Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5, 10, and 25mL, Joint: 14/10, Supplied with one open top compressioncap and one size 014 Viton O-ring and one PTFE-faced septad Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5,
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Round Bottom Boiling Flasks, SJ Joint, Heavy Wall, with Plastic Safety Coating
DWK Life Sciences (Kimble)KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
SYNTHWARE Pear Shaped Flasks
Kemtech AmericaSYNTHWARE pear shaped, heavy wall, single neck flasks with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Quartz single neck round bottom flask with standard taper outer joint.
-
Flask, Round Bottom, Ace-Thred Side Port
Ace GlassRound bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.
-
Flask, Round Bottom, 3 Neck, Angular
United Scientific SuppliesUnited Scientific™ three-necked boiling flasks with ground glass 24/40 joints are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. 24/40 ground glass joints Available in four capacities Made from…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.
-
Single Neck Flat Bottom Flasks
ChemglassSingle neck, flat bottom flask with a standard taper outer joint.
-
-
These PYREX(r) pear-shaped boiling flasks have full length outer 14/20 Standard Taper joints and are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance.…
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Heavy Wall 2L Round Bottom 2-Neck Flasks
Across InternationalAi 2L, 24/40 standard taper joint, heavy wall, round bottom 2-neck flask with one vertical 24/40 neck, and one angled 24/40 side neck. Glass material: high borosilicate glass 3.3.
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. Flask has two hooks 180°; apart for use with CG-110 stainless steel springs.