MOTOR DRIVEN VAN DE GRAAFF Perfect for demonstrating energy transformation from mechanical to electrical. This motor driven Van De Graaff is excellent for physics classrooms and exciting for learners of all ages UP TO 220,000 VOLTS Apparatus can generate an electrostatic charge of up to…

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

The Friction Rods are useful in a variety of electrostatic demonstrations. 603-1: Made of glass tubing and sealed on one end 603-2: Made for a solid glass rod and the edges of the glass are ground to a smooth finish 603-3: Made for a solid glass rod and the edges of the…

A simple but effective device for demonstrating Lenz's Law using eddy currents induced in the wall of a copper tube by a falling magnet. The demonstrator consists of a 12"; long copper tube and two apparently identical metal slugs with rubber end caps. One slug is plain steel, and falls…

Ideal for demonstrating series and parallel circuits. Lamp Boards are supplied with spare bulbs and an activity guide.

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.

Provide students with an understanding of voltaic cells by having them create their own Teach students about reduction-oxidation reactions Allows students to create their own experiments in a guided fashion Includes comprehensive activity guide and student worksheet master copies See below for…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Knife Switches for low voltage experiments (less than 36V) with plastic bases. These items are available with either thumbscrew or spring binding posts.

A contact key is used for experiments which require momentary current. The contact key is used to open or close a circuit. The key is mounted on a 3” x 4.5” x 3” black base with two binding posts. The arm of the contact key is plated metal with an insulated button.

Single Pole, single throw knife switch Durable plastic base for student use Brass poles and knives for strong electrical connection Single pole, single throw knife switch on a durable plastic base. Rugged construction that stands up to tough student use. Poles & knives are made of brass for…

Van De Graaff Generator that can be run on both a motor and a hand crank Motor has adjustable speeds and is compatible with 110/120V and 220/240V Hand crank up to 100kV Sturdy 6" x 8" base with both the components securely mounted Approximately 22" tall This Van De Graaff Generator can be…

The Electronics System 2 Physics Kit is a supplemental kit to Electronics Systems 1 and comes with 35 components, including all the capacitors, resistors and transistors one needs to investigate core concepts in introductory semiconductor electronics. With this kit students can explore common…

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Plastic Battery holder available with Fahnestock Clips, wire leads, or fahnestock clips and jointers.

Well-constructed and attractive electric bell model mounted on a clear acrylic plate and a finished wooden stand. Functional parts are clearly seen. Operates on 6V d.c. with on/off switch, adjustable contact screw, and binding posts for easy connection.

Single Pole, double throw knife switch Durable enough for the classroom Poles and knives made of brass for strong electrical connections Single pole, double throw knife switch mounted on a durable plastic base that stands up during tough student use. Poles & knives are made of brass for good…

Flexible 18swg stranded wire cord with two way stackable banana plugs at both ends.

The unit is bigger than standard electroscopes for easy viewing. The leaf is larger and the wide radius of swing provides a visual and sensitive demonstration. The unit also features a built in scale which helps to determine the amount of charge generated. The metal case is strong and resistant to…

This excellent quality electrostatic generator consists of a charge generation system, an aluminum collector sphere and an electric motor drive on a sturdy base. The charge generation system is based on a moving neoprene belt mounted on insulating rollers with metal charge transfer combs. The…

The Solar Kit offers a convenient introduction to the conversion of solar light energy into electrical energy. The conversion is carried out by a photoelectric panel, and three “consumers” are included to demonstrate the use of the electrical energy; an LED shows the conversion back to…

The classic method for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. One half of the balance is placed inside a solenoid. The other half has an adjustable counterweight and can carry light additional masses. When current is…

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

Our Digital Ammeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different ammeters with different ranges of measurable amperages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to…

Suitable for miniature base lamps. Accepts all replacement bulbs listed on this page. Plastic base, with brass screw type receptacle and two terminals. Miniature Bulbs for use with lamp boards and lamp/bulb holders.

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

The vertically-aligned set of LEDs make an easy and dramatic demonstration of the relationship between the color and wavelength of light. The spectral range of each LED can be investigated with a spectrometer, or just viewed for comparisons with each other and with the “white” LED…

The Electronics System 1 Physics Kit comes with 18 components, including a Circuit Board, and all the Diodes and transistors one needs to investigate core concepts in introductory semiconductor electronics. With this kit students can explore common experiments such as The Half-Wave Rectifier,…

Miniature incandescent bulb holder module for Genecon V3 The lamp module can directly connect to Genecon V3 without any cables. Convenient for experiment with energy consumption and comparison of lighting time between the miniature bulb and LED The transparent body allows you to…

The Electromagnet Kit is used for teaching students the principals of an electromagnet. Everything that is needed is included in the kit, apart from the power supply. Included is a “U”-Shaped Iron Core with two coils of wire, a straight iron bar, two magnetic compasses, wire connector cords,…