The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

Suitable for a wide variety of applications Available accessoris include an electrode arm that can be attached to the left or right-hand side of the instrument; a laminated “Quick guide” for the lab bench; There are also a variety of electrodes for various applications, an extensive range of…

Rugged 3-in-1 probe provides long life Probe is engineered to resist contamination. Particularly suited to harsh conditions, the probe incorporates a pH electrode with a cloth junction and gel polymer electrolyte for long life and greater stability of readings. The probe has a 6-month…

This multi-functional pen type water quality meter measures conductivity and total dissolved solids to determine water quality. The unit has auto calibration and automatic shut off if idle for 2 minutes. This compact unit weighs just 27 grams, is 6” in length and easily fits into a shirt…

Sixteen ounces of liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment …

DuraProbe cells are designed for the highest accuracy under demanding field and plant conditions. This design compensates for electrode fouling, cable and connector resistance, and polarization errors. A choice of glass/platinum, epoxy/graphite, or stainless steel ensure compatibility with most…

The Myron L® hard carry case has a high density polyethylene plastic shell with a foam-lined interior that conforms to specific instruments and accessories to provide maximum shock absorption. Actual configurations may differ from what is shown. (Model PKUU).Soft and hard carry cases for all…

For accurate conductivity analysis of water quality Slip-resistant keypad Quick single-point calibration Measures/compensates temperature in °C or °F Waterproof (IP67) and buoyant Carries the European CE mark Meter features a large, easy-to-read, digital LCD…

The electrode arm EasyPlace is included with every SevenDirect pH meter. This accessory helps provide precise positioning of electrodes, a tidy workplace and streamlined calibration and measurement. The electrode arm is user-friendly and can be operated with one hand, moving straight up and down,…

Thomas No. 1229Q52:  ATC Temperature Probe Replacement For use with the following: pH SD Card Logger Thomas No. 1229Q61:  Conductivity Probe For use with the following meters: Pure Water Meter Benchtop Conductivity/TDS/Salinity Meter Benchtop Water Quality Meter

Connects directly to the YSI 3100 and 3200 Calibrated to OIML recommendations 56 and 68 Cells allow automatic temperature compensation without the need of another probe. For use with 8 pin DIN connector. 3240M01 is of ABS plastic; all others are PYREX® 7740.

OAKTON Conductivity “Singles” pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and…

The Thermo Scientific Orion Star A322 Conductivity Portable Meter is the top choice for advanced measurements on location. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows conductivity/TDS/ salinity resistivity and temperature…

Save money by replacing sensor, not tester!   Conductivity, salinity, and TDS all in one meter   3-point calibration with automatic recognition of standards   Large easy-to-read LCD features two-color backlight   Rugged IP67-rated housing is waterproof,…

The conductivity Meter SevenDirect SD30 provides accurate conductivity measurements for almost any sample across a wide range of applications. The EasyPlace electrode arm and protective cover are included with the instrument. The benchtop meter's ease of use, data handling…

Individual conductivity/TDS calibration solution pouches NIST traceable materials for high accuracy Contains right amount of solution for calibration No containers to clean or carry Pouches are ideal for on-site calibration and verification in the field. Pouches are airtight…

Microprocessors have enabled meter manufacturers to combine many features into smaller designs with better accuracy. The 6 Series meters are a good example of advanced microprocessor technology with an attractive, compact design and user-friendly operation. All meters include electrodes and…

The clear, protective cover fits snuggly over your SevenDirect ACC meter for an added layer of protection against spills and scratches. The replaceable cover extends the life of your SevenDirect meter by protecting against dirt and dust without interfering with screen controls or sensors attached…

The new SensoLab Series Benchtop Conductivity / TDS Meter is the perfect solution for a range of applications from instructional chemistry laboratories to quality control testing. This versatile meter can be powered in two ways, either with 6 AAA batteries to save your valuable bench space or with…

The SD 90 Salt Tester is ideal for field testing in environmental or industrial settings as well as for pool and spa testing! The robust housing is completely waterproof (IP67 rated!) and the intuitive scroll-bar functionality combined with a backlit display enable the easy measurement and…

The EcoSense ® EC30A pen-style instrument provides an ultimate feature set over similar competitive models. The EC30A features an easy-to-use interface, simple one-hand operation and low cost of ownership over the life of the product. The easy, user-replaceable electrode ensures the…

Redi-Stor™ is the ideal solution for storing conductivity probes. It preserves probe’s cleanliness, eliminates growths found when storing in water only, and maintains the probe for immediate use with no conditioning.

Do you need to safely archive and use your measurement data on a computer? This intuitive software helps you to capture and store the data from any SevenCompact™ instrument. Further, you can print or export the data to an open application, such as Excel. Simplicity of data handling …

1, 2 or 3 point calibration (1 per range) Auto-ranging capability The Russell RL060C is a rugged conductivity meter you can use in the plant or in the field.  Auto-ranging capabilities provide ±1 full scale accuracy with fast, repeatable results. Simple four button…

Assures high accuracy and stability Plug-in modules Calibration value from 1 mS to 1 S Furnished in plastic storage case Set of seven plug-in units for calibrating conductance meters are characterized for both AC and DC use and are mounted on banana plugs for speed and…

The sachet holder EasyPlace for the SevenDirect pH meter is extremely convenient for holding sachets in place. The EasyPlace sachet holder is made for the newly designed pH and conductivity sachets to ensure calibration is quick and easy.

Rugged, accurate, reliable--best value for an IP67-rated waterproof meter Intuitive, user-friendly icons—probe status displays cell constant Grip-Clip holder quickly and easily secures the probe to your beaker or container Expanded data logging for up to 150 data sets 700 hours…

Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …

Never worry about the accuracy of your pH, ORP, or conductivity data again! Ensure probe performance with the 5580 Confidence Solution®. This is not a calibration solution but it is a simple probe verification check. Simply immerse your multiparameter probes in the solution and verify the…

1 year warranty CE Mark Highly stable and accurate readings with large LCD display. Designed for simple one-hand operation. Simultaneously displays the parameter being measured and temperature in ºC or ºF. Features automatic temperature compensation, 2 pt. calibration, auto power off, hold…

The YSI conductivity/temperature field probe & 10 Meter cable are compatible for use with EcoSense EC300, EC300A conductivity meter models. It is made of sturdy material which ensures durability and long lasting usage.

Waterproof meter with high-accuracy multi-ranging sensor Units of measure include µS/cm, mS/cm, ppm, ppt Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value Large 3-1/2 digit (2000 count) LCD display Data Hold and low…