Cold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con

Condenser has a top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have standard joints, but we also sell Graham condensers with 24/40 ground glass joints . PRODUCT WARNINGS Our products are not toys . Use…

Tightly wound coil provides enough surface area to condense high vapor pressure solvents like hexane. With an internal, coil-type cold finger Standard Taper outer joint at the top, Standard Taper inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors…

Microscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…

Useful for refluxing and distillation assemblies. The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium Medium length Standard Taper joints Condensate is not restricted with this design Manufactured from…

Reflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

These PYREX® condensers have a high surface area per unit length of the 200mm long jacket with a 19/38 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies Condenser tubulations are approximately 10mm O.D.

No Hold Up West condenser available with hose barbs or Ace-Safe connectors.

Condenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at…

With standard taper or spherical joint at bottom and top. Hose connections are size D.

Bulb type, approximately one bulb per 50 mm, with various joint sizes at bottom and top. Available with hose barbs or Ace-Safe connectors.,/p>

The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium. Full length 24/40 joints Standard Taper outer joint at the top and Standard Taper inner drip joint at the bottom Manufactured from 33 expansion, low…

Mineral Oil Bubbler, Body OD: 26mm,Overall Height: 185mm OR 500mm, Hose Connection: 10mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**

This specially designed PYREX® cold finger condenser is a replacement part for the PYREX® Cyanide Distilling Apparatus (Thomas No. 0320A91)

Dewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.

With standard taper 24/40 outer joint at top. Hose connections are size D, for 3/8in ID tubing.

Allihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip…

I.D. of inner tube is designed large enough to accept a thermometer. Supplied with one holed compression cap and one Viton® O-ring.

Plastic conical joint clips are size 24, designed to securely hold 24/40 joint size glassware together.  Note: Clips shipped are blue

Replacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…

Reflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.

Top of condenser modified with #7 Ace-Thred so inlet tube is removable. This offers easier cleaning and greater economy if inlet tube breaks. With molded spiral condensing surface and 24/40 joint at bottom and top. Jacket length 250mm. Available with h

LIDS, REACTORS, 6-NECK FOR 57MM OD REACTION VESSEL BODY, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 6-Nk, for 57mm OD Reactor Body: 14/20 Outer CN, (3) 14/20 Outer SN's, and (2) 10/18 Outer SN's; Equivalent to Mettler  Easymax® Part # 51161619Mettler Easymax® is a…

CONDENSERSS, AIR REFLUX, MINUM-WARE® CONDENSERSS, WATER-JACKETED, REFLUX, MINUM-WARE® ADAPTERS, CLAISEN HEAD, MINUM-WARE®, Supplied complete with open-top screw cap (MW-102-22) and PTFE faced silicone septa (MW-104-12). HICKMAN STILL HEADS, MINUM-WARE®

With inner and outer joints at bottom and top. Available with #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing.

With a joint at 15º angle.

Similar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.

Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Hopkins condenser with tube fitting Dimensions: 50 x 260mm Joints: 24/40 Compatible With: Central collect S-EVAP KD units

Graham condenser is designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread connector.

With water cooled standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D.