The portable butane burner is a great option for any lab because the wide base and low profile provides the burner with a stable footing. The support rings attached at the top, allow you to use the burner as a hotplate for laboratory glassware. The valve and ignition buttons are separate for…

The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

Protective hood acts as a gas trap for quick ignitions. Synonyms: burner ignitors

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Power supply (used for Argos StarFire ST burner)

Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…

Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…

Flow Spoiler

The Argos FireStar™ units are compact, safe and versatile Bunsen burners that operate with either house gas or disposable gas cartridges. The FireStar features UV resistant stainless steel housing and a removable burner head for easy cleaning. The dual knobs for adjusting gas and air flow…

Various tops for use with Humboldt burners.

The laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…

Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer. Mounted on a die casted zinc alloy base. Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer and is threaded into a die casted zinc alloy…

When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

The Bunsen Burner can be used with natural gas or cylinder propane gas. The burner has a knob that allows you to adjust the height of the flame and a sturdy cast iron base that provides stability.

High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water…

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Safety enhanced laboratory gas burner, battery operated with touch free IR-sensor and button function. Innovative technology that thinks with you! Fuego SCS pro with new functions & graphic display The Fuego SCS pro represents a new status among laboratory gas burners. The…

The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".

Accessory for WLD-TEC Quadrupod (1228Z46). Ceran (glass-ceramic) construction resists damage due to sudden temperature changes 155 x 155 mm (L x W)

Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…

Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

Stainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…

NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 2 FEET Tubing is 2 feet (0.6m) in length, making the hose ideal for general laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…

This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

The portable micro butane burner is easy to operate and has a trigger ignition and adjustable flame control. The simple on and off control and steady tip-resistant design, make it a useful and portable burner almost anywhere in the lab. The flame can reach a maximum temperature of approximately…

Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

135 ml capacity Conical, low profile design is more stable and much safer than glass alcohol lamps Supplied with snuffer cap and one extra wick Height: 8.9 cm (31⁄2") Diameter: 10.2 cm (4") Two Way Lamp Stand Used to vary distance between heated vessel and alcohol lamp …

The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

Switching power supply for global electricity supply for Fuego series, Gasprofi 1 micro series, Flame 100/110, Gasprofi (as of serial no. 07xxxxx) and charging station Art.-No. 8.000.911 / 8.000.900

Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.