Burners, Mutagenesis & Cloning
-
Burner Gas Connector
HumboldtFlexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.
-
Bunsen Burner, LPG - Flame Stabilizer, StabiliBase Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed…
-
Flint sparking ignitor
MilliporeSigmaProtective hood acts as a gas trap for quick ignitions. Synonyms: burner ignitors
-
Tirril Burners without Pilot Flame
HumboldtThe Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…
-
Power supply (used for Argos StarFire ST burner)
Argos TechnologiesPower supply (used for Argos StarFire ST burner)
-
Meker Bunsen Burner
EiscoPremium Meker Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a…
-
Electric Bunsen Burner
Electrothermal (Cole-Parmer)Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…
-
Gas Lighter
United Scientific SuppliesHooded lighter is safe and economical. The hood traps gas and protects the lighting file. Replacement flints are also available.
-
NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 2 FEET Tubing is 2 feet (0.6m) in length, making the hose ideal for general laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…
-
Micro Bunsen Burner
EiscoMicro Bunsen Burner, LPG - StabiliBase Anti-Tip Design The micro Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve. The total height of the burner is its best…
-
Fuego SCS pro
WLD-TECSafety enhanced laboratory gas burner, battery operated with touch free IR-sensor and button function. Innovative technology that thinks with you! Fuego SCS pro with new functions & graphic display The Fuego SCS pro represents a new status among laboratory gas burners. The…
-
Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…
-
Burner Alcohol Dual-Wick
GSC International, Inc.This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…
-
NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 3 FEET Tubing is 3 feet (0.9m) in length, making the hose ideal for spread-out laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…
-
Wood Splints, 6", PK100
EiscoPACK OF 1000 1000 wooden splints for use in various science experiments LONG Long, thin strips of soft drywood that light easily are helpful in demonstrating oxygen's presence and support of combustion MULTIUSE Great for numerous tasks including safely lighting bunsen burners, chemically…
-
Flame 100
WLD-TECThe safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…
-
Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…
-
Butane fuel Micro Torch MT-51 handheld torch
MilliporeSigmaGenerate a 2,400F (1,300C) pinpoint flame for a wide variety of torch applications. Units are self-igniting and have an adjustable flame. Unit shipped empty, order butane separately. Synonyms: butane torch; butane torches; mini torch
-
Portable Micro Butane Burner
GSC International, Inc.The portable micro butane burner is easy to operate and has a trigger ignition and adjustable flame control. The simple on and off control and steady tip-resistant design, make it a useful and portable burner almost anywhere in the lab. The flame can reach a maximum temperature of approximately…
-
Sterimax Electrical Sterilizer
WLD-TECStainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…
-
Burner Wing Tops
HumboldtDesigned to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.
-
Butane Burner Hot Plate
GSC International, Inc.The portable butane burner is a great option for any lab because the wide base and low profile provides the burner with a stable footing. The support rings attached at the top, allow you to use the burner as a hotplate for laboratory glassware. The valve and ignition buttons are separate for…
-
Fuego SCS
WLD-TECThe laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…
-
Burner Gasket Kit
PerkinElmerThis product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.
-
Alcohol Lamp
Boekel135 ml capacity Conical, low profile design is more stable and much safer than glass alcohol lamps Supplied with snuffer cap and one extra wick Height: 8.9 cm (31⁄2") Diameter: 10.2 cm (4") Two Way Lamp Stand Used to vary distance between heated vessel and alcohol lamp …
-
Flame Shield
HumboldtUsed to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.
-
Bunsen Burner, Tirril
United Scientific SuppliesNatural Gas with Flame Stabilizer Tirril Bunsen Burner
-
Pilot Flame Burner
HumboldtIdeal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …
-
Scienceware® Piezoelectric Gas Lighter
SP Bel-ArtRequires no batteries or fuel Push-button trigger Weighs only 3.1 ounces The small, self-contained piezoelectric generator produces sparks at 20 Kv. Lighter can be used to light bunsen burners, gas stoves, propane torches or oxy-acetylene torches. Plastic pistol-grip provides…
-
-
PREMIUM QUALITY Premium quality Tirrill burner that features multiple control options including air flow, flame stabilizer and gas flow control FOR NATURAL GAS Suitable for use with Natural Gas (methane). Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing OCTAGONAL…
-
Pipe Mounting-Type Burner
HumboldtDesigned for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …